* Get the plans
http://perso.orange.fr/midgard/ww2/psh_diybuildings.htm* Draw the 4 sides of the building on a 5mm thick foamcard including windows and doors.
* Cut the sides from the foam card, remove the windows and doors.
* Prepare the assembly and drill some holes in order to insert pieces of tooth pick into them. They will consolidate the corners. I also put some tape.
* Adjust the 2 roof 's sides to match the building. Cut the side near the chimney. Assemble the roof with a tape then glue two 90° triangles on the underside.
* Draw the floor on a 5mm foamcard, cut it and glue it.
* Glue some cardboard stripes ( 5mm x 25mm ) and glue them above and under the windows. Use a 30mm long stripe above the doors.
* Mix water and ceramic tiles glue to obtain a textured paint. Paint all the building's sides including the chimney (but not the roof).
* Let it dry at least a night.
* You can start the painting of the building.