Author Topic: Another 28mm pirate ship project (Read 9957 times)

6mmfan · « **on:** January 28, 2008, 02:21:02 AM »

Hi all

Here's a pirate ship I started which is based on the Gary Chalk model. With the new LOTHS book out I thought I'd make one of these to try and get the guys at my local club interested.

Here a picture of progress so far.

I've created a webpage here with more details and the different stages of construction so far.

http://6mm.wargaming.info/page1010.shtml

Hopefully I will have some more stages completed in about a week.

Cheers
Kieran

TJSKI · « **Reply #1 on:** January 28, 2008, 04:57:20 PM »

Kieran

Nice looking ship, I have a few of these same ships that I used for the play Testing on LotHS.

Looks good, keep it up...

Tim Kulinski

fastolfrus · « **Reply #2 on:** January 29, 2008, 01:41:10 PM »

An interesting site.
Looking forward to part 2

6mmfan · « **Reply #3 on:** February 10, 2008, 01:35:39 AM »

Hi

Heres the second installment of my pirate ship construction straight from the construction yards. The hull is almost finished and its starting to look more like a ship! Next its on to the masts and sails.

Link to the article
http://6mm.wargaming.info/page1011.shtml

Cheers
[/img]

white knight · « **Reply #4 on:** February 10, 2008, 09:51:45 AM »

Looking great. I will have to try this some day.

Argonor · « **Reply #5 on:** February 10, 2008, 12:24:02 PM »

Just curious: Where do you intend to place the steering wheel/rudder (is it called that in English?)?

revford · « **Reply #6 on:** February 10, 2008, 01:38:03 PM »

Quote from: "Argonor"

(is it called that in English?)?

Rudder is good, in a car it's called a "steering wheel", on a ship it's a "ship's wheel" or just "the wheel".

6mmfan · « **Reply #7 on:** February 11, 2008, 10:08:34 AM »

I'm placing it to the left of the main mast but it would have been better to be in the middle in front of the main mast. By the time I assembled it and cut the holes for the mast I realised that there wasn't any room for the wheel (the Gary Chalk version doesn't have a wheel at all).

Cheers
Kieran

Argonor · « **Reply #8 on:** February 11, 2008, 11:07:14 AM »

OK. I wasn't completely in the forest, then

Argonor · « **Reply #9 on:** February 11, 2008, 01:12:01 PM »

Where on Foundry's site can those templates be found?

6mmfan · « **Reply #10 on:** February 12, 2008, 05:13:07 AM »

Hi

It used to be in the Library section of the Foundry site but it looks like it they are redoing that section.

Send me a PM if you want a copy of the article

6mmfan · « **Reply #11 on:** February 24, 2008, 10:05:41 AM »

Hi

Here's the final installment of my Gary Chalk pirate ship project.

For the last part of the article you can go to this page

http://6mm.wargaming.info/page1012.shtml

I hope you like it

Cheers
Kieran

Rhoderic · « **Reply #12 on:** February 24, 2008, 10:27:21 AM »

That looks AWESOME! :love:

Too bad I wouldn't have the stamina to build something like that. The problem with the Gary Chalk designs is that following the plans to the letter still only creates a very bare-boned ship, whereas the ships pictured in his article have had all kinds of extra embellishments, conveniently left unmentioned in the plans. A beginner modeller might not notice this until he's inspected the pictures very closely, and could start building a ship thinking it'll turn out as nice as Gary Chalk's ones if he only does exactly what the plans say.

The decorations you've made outshine Gary Chalk's, by the way.

Argonor · « **Reply #13 on:** February 24, 2008, 10:58:17 AM »

'Hoist the Red Flag!'

Westfalia Chris · « **Reply #14 on:** February 24, 2008, 11:00:14 AM »

Excellent choice of colours. Now, my old "Lady Luck" sailed off to anchor in the Professor´s port, but I´m seriously tempted to build another ship now that I´ve seen this fine piece...

News:

Donate

We Appreciate Your Support

Recent

Author Topic: Another 28mm pirate ship project (Read 9957 times)

Related Topics