Author Topic: Post Apocalypse/Mad Max Vehicles - Update: 28 Mar 20: V8 Interceptor (Pg 9) (Read 52570 times)

Overlord · « **Reply #60 on:** February 15, 2015, 04:53:42 PM »

Heavy Crossbow:

Scratch-built with plastic card/strip/rod/tube, brass rod, wire and aluminium mesh. The pyramid base is loose fitting, allowing the weapon to be rotated in situ, with the brass rod fitting into a tube set into the tyrewall base. There are around 50 separate components and it was rather fiddly at times, but is now a reasonably robust finished item.

In situ, with a miniature:

Malamute · « **Reply #61 on:** February 15, 2015, 05:33:10 PM »

Love it.

Mason · « **Reply #62 on:** February 15, 2015, 05:37:10 PM »

Bloody brilliant, mate.
Looks like a lot of effort but the result is class.

James Holloway · « **Reply #63 on:** February 15, 2015, 05:44:06 PM »

That crossbow looks absolutely terrific.

Dr Mathias · « **Reply #64 on:** February 15, 2015, 06:18:41 PM »

That's pretty sweet! Perfect for skewering desert scum

Andym · « **Reply #65 on:** February 15, 2015, 08:52:02 PM »

Ooph! Between you and colin with your plastic card bits!! Stunning craftsmanship! !

Centaur_Seducer · « **Reply #66 on:** February 15, 2015, 09:13:25 PM »

I never tyre reading this thread.

Yes!

Overlord · « **Reply #67 on:** February 21, 2015, 02:03:58 PM »

Quote from: Mason on February 15, 2015, 05:37:10 PM

Looks like a lot of effort but the result is class.

Rather over-engineered, but (as with so many builds) I was making it up as I went along.

Quote from: Centaur_Seducer on February 15, 2015, 09:13:25 PM

I never tyre reading this thread.

Tread carefully.....

Meanwhile, back at the bus...

I've sculpted the (partial) body of the driver, adding a spare Crooked Dice head I had:

Supplies for the bus interior:

The boxes are a single piece of blue foam cut and painted to look like a pile of boxes. I added some fuel drums (roughly cast in plaster years ago) and a putty sheet. There are a few more loose items currently being painted.

Bus exterior:

More ProCreate for the sheets that hang from the side of the bus. They have been sculpted onto thin plastic card as my intention is to make them removable for when the bus drives off.

The sheets, along with a (removable) plastic card shelf and a rope ladder (galvanised wire mesh). Base colour finished on the bus body.

Constable Bertrand · « **Reply #68 on:** February 21, 2015, 09:05:11 PM »

The driver turned out great! I guess amputees get all the worst jobs after the apocalypse.. at least he gets fed.

Nice work not doing the legs, I spent ages giving a pilot a pair of legs (using 2 figures) only figuring out at the end you cannot see anything below his chest

Argonor · « **Reply #69 on:** February 21, 2015, 11:57:47 PM »

Great to see this progressing - I remember your Mad Max table from the first BLAM!

Silent Invader · « **Reply #70 on:** February 22, 2015, 08:38:35 AM »

Looks great Paul - every time I read this thread I want to watch the movie

Hawkeye · « **Reply #71 on:** February 22, 2015, 07:25:32 PM »

You've captured that School Bus Yellow perfectly - I passed one just the other day, so I was able to make the comparison! I picked up that very same bus just the other day, so I'm looking forward to seeing yours finished!

Malamute · « **Reply #72 on:** March 04, 2015, 05:11:49 PM »

Great stuff, excellent putty pushing on the driver and the sheets.

Overlord · « **Reply #73 on:** March 06, 2015, 11:41:16 AM »

I added some armour panels to the other side of the bus. A piece of plastic card was cut to size, but slightly smaller than required. Individual panels were then added which slightly overlapped the underlying piece. On the reverse I glued several 90' angle pieces that would sit in the windows and support the armour.

The finished bus:

The armour, sheets, ladder and shelf are all removeable.
It was only after taking the photos I realised that I hadn't placed some bits on quite straight.... Lucky I hadn't glued them like that!

I have also finished both sides of the gateway, but as one half forms my entry for the current Build Something contest I will wait until its conclusion before posting.

uti long smile · « **Reply #74 on:** March 06, 2015, 11:44:27 AM »

Magnificent!

News:

Donate

We Appreciate Your Support

Recent

Author Topic: Post Apocalypse/Mad Max Vehicles - Update: 28 Mar 20: V8 Interceptor (Pg 9) (Read 52570 times)

Related Topics