Lead Adventure Forum
Miniatures Adventure => Future Wars => Topic started by: snitcythedog on 01 July 2017, 06:01:55 PM
-
Just some laser cut terrain done up. Firstly is two packs of the TT combat terrain fences. I did not use the connectors since they stood out a bit. I glued two sections together and added bolts. These were based and painted.
(https://4.bp.blogspot.com/-hNZw8MSWibo/WVfRHuGeMhI/AAAAAAAABbQ/9USGHR4_p2kP6z-YExUJiVX2vyL885pvQCLcBGAs/s1600/DSC00548.jpg)
(https://1.bp.blogspot.com/-WLKQ7liuOPs/WVfRI2w5AvI/AAAAAAAABbU/nAZqkJmE6x4EPhfjwriRq2vHZnCJp8DMACLcBGAs/s1600/DSC00549.jpg)
The next batch are all Miniature Scenery.
Satellite dishes. I just replaced the MDF cables, added some punched disks and added some bolts.
(https://4.bp.blogspot.com/-CUgqdF_iqeI/WVfRQJxiPJI/AAAAAAAABbY/kW3muPJE4xoIRwTHCcrmaUN0MDomHm32QCLcBGAs/s1600/DSC00550.jpg)
(https://3.bp.blogspot.com/-uklFZTYZZKk/WVfRdh8-uuI/AAAAAAAABbc/cugdy6k54ysBr_TdLOWiqNwOcb9fsG1hgCLcBGAs/s1600/DSC00551.jpg)
Their truck. No modifications here just based.
(https://3.bp.blogspot.com/-2E4vlsh09CY/WVfRn6vz04I/AAAAAAAABbg/NhJ7bjwuV_woyfSr1fJ-4olSWCXvOf38wCLcBGAs/s1600/DSC00552.jpg)
(https://3.bp.blogspot.com/-uFYjW-F-XgQ/WVfRxWOwrCI/AAAAAAAABbk/CFDN48fW0WUZi4QdN9iZP6oFFDYF14kEACLcBGAs/s1600/DSC00553.jpg)
And one of the two dune buggies that came in the kit. I added some wires bolts and bits to the engine. I also sanded the edges down to make some curved surfaces out of the flat MDF panels.
(https://4.bp.blogspot.com/-sdhk8lK3R4k/WVfSAcDuadI/AAAAAAAABbo/-Abc5HFDz5gdxrvZzkk5XolI-LeuVoKzgCLcBGAs/s1600/DSC00554.jpg)
(https://2.bp.blogspot.com/-4ZhPqkneQyA/WVfSDDb8UDI/AAAAAAAABbs/pMyiPzfVCXcc4Al3QyUeB4O9tR9hfwiRgCLcBGAs/s1600/DSC00555.jpg)
Hope you like.
Snitchy sends.
-
Nice! I like the little conversions. They really add something to the MDF kits.
R.
-
Those fences are particularly well done.
-
That fencing is great.
The vehicles look good.
-
Thanks all. I am pretty happy with the fences. Price was right too. Two packs for under eight pounds. My problem as attaching them to the base. I ended up supergluing them to tack them in place. Then using two part resin as the main support.
Again. Thanks all.
Snitchy sends.