Lead Adventure Forum
Other Stuff => Workbench => Topic started by: agoodall on December 12, 2021, 04:12:42 AM
-
Hi everyone. What is a good way to model sewer water, assuming you already have a sewer model? I saw someone recommend Woodland Scenics' Water Effects, but from what I can see their Realistic Water looks more useful, with the other product for texture. Yet another person suggested clear nail polish.
Has anyone modeled a sewer? If so, how did you do it?
-
Depending upon what you want with the sewer water, there are a lot of options.
I'd made a few sewer tiles for D&D a few years ago, and I'd used high gloss polyurethane for the main water effect. I'd painted beneath it and mixed a little bit of a few green inks into the polyurethane, and also used some brown and darker green fine flock sprinkled in between layers there. Adding other bits and pieces of detritus as I went. Then I added a layer of gloss mod podge over the top.
-
agoodall Try looking around before you pull the trigger and purchase something. Personally I would stay away from the woodland scenics products for war gaming. I have found that the surface that they create ends up a bit too soft and will show marks from minis bases when used on the table. My go to has always been resin. Here is a good toot: https://hirstarts.com/tips17/tips17.html#plan (https://hirstarts.com/tips17/tips17.html#plan) For pouring resin in your sewers do not pour too deep. Resin can generate heat when curing and if you pour past 1/4 inch you could damage foam or plastics that are going to be embedded in the surface.
-
Thanks, folks, that's a lot of help. I'll look into various options. I hadn't thought about the WS stuff being too soft.
-
I've used several versions of the WS water, and never had an issue with it being too soft.
Note, for the Realistic Water product you want to store it flat. I used it on some 2'x4' boards, and stored them vertically. After a fully year, the water had flowed 1/4", making a bulge where the river left the board. So I flipped it over. Another Year later, and it was back to being flush.
The boards are used only in a game we play after Christmas, so honestly only view it yearly.
Other times I used it (ponds, wells, oasis, etc.) there's no issue. It was just being vertical for a year that did it.
-
My go to for water is acrylic gloss medium - and readily tinted with acrylic paints. Can do many layers for depth effects and more.
Now, don't forget a few unsavory 'floaties' in your sewer model! :o
-
My go to for water is acrylic gloss medium - and readily tinted with acrylic paints. Can do many layers for depth effects and more.
Now, don't forget a few unsavory 'floaties' in your sewer model! :o
Yes, and the occasional string of bubbles coming from unseen sewer dwellers.
Dan
-
The acrylic gloss medium sounds like my best bet. Thank you! The fact that the WS water effect doesn't actually harden makes me want to nope away from it.