Lead Adventure Forum

Miniatures Adventure => The Conflicts that came in from the Cold => Topic started by: Capt Troy Tempest on October 08, 2023, 10:20:23 PM

Title: Black uniforms
Post by: Capt Troy Tempest on October 08, 2023, 10:20:23 PM
Does anyone know if this range of figures is still available anywhere. Originally from wargames foundry.
U.K. if possible.

Also looking of 28mm emergency personal U.K. setting.
Title: Re: Looking for figures. Modern conflict.
Post by: Capt Troy Tempest on October 08, 2023, 11:33:38 PM
Found them after few hour searching.
Casting room miniatures. lol

Reminders for self. Citizen Smith figure.
Matchlock miniatures.
Another been looking for ages to find.
Title: Re: Looking for figures. Modern conflict.
Post by: Digits on October 08, 2023, 11:49:12 PM
Well done!
Title: Re: Looking for figures. Modern conflict.
Post by: carlos marighela on October 09, 2023, 08:00:27 AM
To further burden your wallet take a gander at these:

https://www.crusaderminiatures.com/list.php?cat=17&page=1
Title: Re: Told you there would be trouble if I went in church.
Post by: Capt Troy Tempest on October 09, 2023, 04:16:59 PM
Thankyou.
Collecting less violent figures first.
Need to make some crowds. Mainly football hooligans, skin heads, punks etc.
David sent me a link to crooked dice, some nice modern figures in their range.

Just found this today, looks really nice.
https://www.renedra.co.uk/product/coming-soon-ramshackle-church/
Title: Re: Told you there would be trouble if I went in church.
Post by: Ultravanillasmurf on October 09, 2023, 05:49:08 PM
I always recommend Crooked Dice.
Additionally, there is Offensive Miniatures Rioting Mob and the Law.
https://www.offensiveminiatures.com/rioting-mob-and-the-law (https://www.offensiveminiatures.com/rioting-mob-and-the-law)

There is also Pandyman Entertainment (cue Carlos singing "Time to go home, time to go home...").
https://www.pandyman.co.uk/threatlevelshop?Category=Miniatures (https://www.pandyman.co.uk/threatlevelshop?Category=Miniatures)
(https://blogger.googleusercontent.com/img/a/AVvXsEiaXWU5kLH2opyZGqWfoj2BufVTk2sYXv-tuFxyIswyUsGOCZAReakRXenhf7ysrdRruAXV5FJJh8Maro9An3xSMWTVF_hl_7stMBhhvOzG2shLkZJGRZvEo44GA5HFR_Pt6S5hkt46112tDWfoQJz54ULZmCqV1KySekx3jRHVFYUkUmJtxfgNmi4Slw=s500)
Title: Re: Told you there would be trouble if I went in church.
Post by: Belligerentparrot on October 09, 2023, 06:01:01 PM
Wild In the Streets minis might be worth a look. Lots of unarmed punks and other subcultures, including a few famous faces :)
Title: Re: Told you there would be trouble if I went in church.
Post by: Inkpaduta on October 09, 2023, 06:02:59 PM
Foundry still has their line and they are very nice figures,
Title: Re: Told you there would be trouble if I went in church.
Post by: Capt Troy Tempest on October 09, 2023, 06:13:55 PM
Thank you for pandyman link.
Been looking for para medics.
Need to find British ambulance now at reasonable price.
Title: Re: Told you there would be trouble if I went in church.
Post by: Ultravanillasmurf on October 09, 2023, 06:19:51 PM
Need to find British ambulance now at reasonable price.
A few years back Karl previewed a British ambulance, though it has not been mentioned for awhile.
Title: Re: mdf buildings.
Post by: Capt Troy Tempest on October 11, 2023, 08:41:46 PM
I need to start getting more modern building. Looked at timeline terrace units, they have one with shop in middle.
Problem is no detail. Can anyone point me in the direction of tutorial to make it looks more presentable.
Also need a British public house.
Good place for Friday night punch up or hangout for football hooligans. 🙏 thanks.
Title: Re: mdf buildings.
Post by: Digits on October 11, 2023, 09:08:46 PM
Buy the stl…find a print house and get one of these….

https://corvusgamesterrain.com/products/urban-english-pub-digital-stl-3d-printable
Title: Re: mdf buildings.
Post by: joekano on October 12, 2023, 04:09:02 PM
Check out https://scalescenes.com/scratchbuilders-yard/ (https://scalescenes.com/scratchbuilders-yard/) which sells downloads for model railroad paper buildings (texture sheets and full kits).  They are in 1:76 but you can upscale on your printer and I've used them successfully on MDF buildings.

(https://scalescenes.com/wp-content/uploads/TXA__featured.jpg)

(https://scalescenes.com/wp-content/uploads/TX00e.jpg)

(https://scalescenes.com/wp-content/uploads/2015/04/TX00a.jpg)

Title: Re: mdf buildings.
Post by: joekano on October 12, 2023, 04:19:46 PM
Also, Sarissa has a pub that may work:

https://sarissa-precision.com/products/cornerpubwithbackyardandbunker (https://sarissa-precision.com/products/cornerpubwithbackyardandbunker)

And Warbases:
https://warbases.co.uk/product/public-house/ (https://warbases.co.uk/product/public-house/)


Title: Re: Emergency vehicles U.K.
Post by: Capt Troy Tempest on October 13, 2023, 04:59:03 PM
The entertainer toy shop are selling these at £12 each. British street scene.
28mm police officer by the side for scale. Figure from killerbee, with pistol altered to taser.
The ambulance is white not current yellow, but since my figure cover 70,s upto current, it will do.
Still need police van, then emergency service’s covered.


Title: Re: Emergency vehicles U.K.
Post by: Thargor on October 13, 2023, 06:01:52 PM
Charlie Foxtrot do a great Pub and some other bits that might be useful.  They're great buildings.

https://www.charliefoxtrotmodels.com/collections/world-war-2-europe/products/28mm-1-56-the-red-lion-pub
Title: Re: Emergency vehicles U.K.
Post by: Johnny Boy on October 14, 2023, 04:30:41 PM
Charlie Foxtrot do a great Pub and some other bits that might be useful.  They're great buildings.

https://www.charliefoxtrotmodels.com/collections/world-war-2-europe/products/28mm-1-56-the-red-lion-pub

I would heartily second that, in the VBCW and World War Two ranges there are buildings that would most certainly stand the test of time and look right in a modern setting.
Title: Re: Emergency vehicles U.K.
Post by: Overlord on October 14, 2023, 04:59:57 PM
If you are still after footbal hooligans try Aggro Miniatures from Ainsty Castings:

https://www.ainstycastings.co.uk/product-category/aggro-minis/ (pic from Ainsty)
(https://www.ainstycastings.co.uk/wp-content/uploads/2017/02/firm.jpg)

There is also the Geezers range from KillerBgames:
https://killerbgames.co.uk/shop/ols/categories/geezers-shut-it?page=1
(My pics)
(http://leadadventureforum.com/gallery/60/369-141023155622-60316424.jpeg)

(http://leadadventureforum.com/gallery/60/369-141023155622-603151635.jpeg)

(http://leadadventureforum.com/gallery/60/369-141023155622-603131914.jpeg)
Title: Re: Emergency vehicles U.K.
Post by: Capt Troy Tempest on October 14, 2023, 05:41:04 PM
Yes, aggro mini’s set me off on this project. There was allot going on in U.K. at time, so thought I would have ago at civil unrest.
Problem being lost interest in wargaming for couple of years. No one near to game with. But things changing now, moving south to be near son and grandkids.

Started looking at sites again, need to get back into painting, bet most have dried up now.
This is going to be my work in progress thread.
Will start story next year on different thread.

So as not to cause problems the two sides will be the YES or NO’s, fore or against. In’s or out’s and for easy reference on gaming board, reds vs blues by colour of arm bands.

Please keep the suggestion coming, looking at crooked dice earlier, even figures from apocalyptic games can work.

Red lion very nice, like the rendering to first floor. Ordering next week. Thank you.
Title: Re: Emergency vehicles U.K.
Post by: OSHIROmodels on October 14, 2023, 06:08:58 PM
There's a few things here that might be of interest  :)

https://www.oshiromodels.co.uk/victorianterraces (https://www.oshiromodels.co.uk/victorianterraces)
https://www.oshiromodels.co.uk/victorianrailways (https://www.oshiromodels.co.uk/victorianrailways)
https://www.oshiromodels.co.uk/victorianwarehouses (https://www.oshiromodels.co.uk/victorianwarehouses)
Title: Re: Told you there would be trouble if I went in church.
Post by: Binky on October 15, 2023, 08:57:22 PM
Thankyou.
Collecting less violent figures first.
Need to make some crowds. Mainly football hooligans, skin heads, punks etc.

Wild in The Streets by Slow Death Games has some great figures for antisocial youth subcultures, including a punk gang and a set of skinheads including one waving a football scarf. As far as I can see they were sold in the UK by Corehammer and are currently out of stock but an internet search might bring up some in stock somewhere.
https://corehammer.bigcartel.com/product/wild-in-the-streets-crust-punk-gang (https://corehammer.bigcartel.com/product/wild-in-the-streets-crust-punk-gang)
https://corehammer.bigcartel.com/product/wild-in-the-streets-skinhead-gang (https://corehammer.bigcartel.com/product/wild-in-the-streets-skinhead-gang)
Title: Re: Emergency vehicles U.K.
Post by: Digits on October 15, 2023, 09:04:13 PM
Oh they look good!
Title: Re: Emergency vehicles U.K.
Post by: Capt Troy Tempest on October 15, 2023, 10:06:55 PM
Thanks Binky, one to watch for future, regrettably their site says “sold out” across whole range.
Title: Re: Emergency vehicles U.K.
Post by: Ultravanillasmurf on October 16, 2023, 06:11:31 PM
Anvil have emergency personnel as prints or STLs at the moment.
Title: Re: Emergency vehicles U.K.
Post by: Cypher226 on October 18, 2023, 09:17:52 AM
Thanks Binky, one to watch for future, regrettably their site says “sold out” across whole range.


IIRC they're either running, or just run, a kickstarter, so that's probably why everything's marked sold out.
Title: Re: Charlie foxtrot buildings
Post by: Capt Troy Tempest on October 21, 2023, 01:29:27 PM
Red lion pub arrived, good job not blue recycling bin day, as postie put it in there whilst I was away.

https://www.charliefoxtrotmodels.com/products/28mm-1-56-the-red-lion-pub

Questions. How do you do the white top half of pub and second what glue is recommended. Last one I made came undone after a few years, in box awaiting repair.
Title: Re: Charlie foxtrot buildings
Post by: Johnny Boy on October 21, 2023, 08:06:44 PM
Ordinary PVA to stick it all together and whatever your preferred method of render for the top half. There's an excellent how to for the Red Lion on the Charlie Foxtrot Website.
Title: Re: Charlie foxtrot buildings
Post by: carlos marighela on October 22, 2023, 12:00:51 AM
Just a tip and not a commentary on the specific kit, I don't have any CF models. A strip of balsa glued into the interior angles of the corners of the building, adds to the strength of the joins and also helps square the angles.

PVA glue is what I have used on most of my MDF structures. I did use a stronger wood filler/ adhesive on a couple and perhaps ironically, they were the ones to come apart at the seams, albeit mostly as part of a move and poor storage.
Title: Re: Charlie foxtrot buildings
Post by: Capt Troy Tempest on October 24, 2023, 04:31:26 PM
Hippie scum from casting room miniatures.

Happy with most, just need to do something with Woodstock girl on end.

Peace guy has acquired bottle, so not so much love, but more warrr.
Title: Re: The summer of 💕.
Post by: mikedemana on October 25, 2023, 03:34:25 AM
I really like those Casting Room Miniatures. I have modified quite a few of them for my Mean Streets: War in Gang-infested Cities games (http://www.firstcommandwargames.com/mean-streets.html).

Here are some examples...
(https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEgyAgJvhORKwXB9nZY4y65JbELbY2VSeKOxldibssxeozPt2RwcYaz5LWxvHQMWxWX5p0RqF2bRgGkJL_GmadXDNb6x2Xly6zaC26RM6V6hf-MNeHZD_AfmV--2-R93PWuOM1ZN0XR1-JwEysfGxF69dPMrfCijop5IQykMWVlc9fxc4XGqT-Se4-Qh5Yc/w612-h640/2023OriginsMS_PoliceVsMohawks.jpg)

(https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEjH02NVpLZIEVqXA7Er42Hs8HyKjtSeFzTa00QUSgKx2sCkE1iI0yBNTnGkwO87Z3MG0XDtxNCyDA77dBYyPcv_gjIVhAI-cGiw3s2UsE3Xeh9PVA78fvTjoPGHRU1cAKvUQmySS23ie9lwAhdaJv-MibjMNfD8LwpuxgFBf07M9PRTBLATAbT5iputoTI/w570-h640/2023OriginsMS_FlipposVsSantanas01.jpg)

(https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEjRFIuLX3JCsy5x-zl0oBxkoMcXapxMsjMKFWfxopYnES3Y3T87ROJmIuTVM1jVB3k_rRsQYpVzBwoyAzQvv0pQ-yuQjbROVS6Kqs9poEuFaBmNMchT9ozW7wA4xjtWC3xxMN-olTaOk1PRngSDMjO4ESMugWGC-WyrBYS8O680y1k1uf-u8lwApDm_/w640-h562/OrigGameDay_MohawksGasStation.jpg)

For more pictures of street gangs I've created using these and other manufacturers, check out my Lead Legionaries blog section covering these games:
http://leadlegionaries.blogspot.com/search/label/Gang%20Warfare

Hope they provide some inspiration or ideas...  ;D

Mike Demana
Title: Re: The summer of 💕.
Post by: CapnJim on October 31, 2023, 11:18:13 PM
Hmm.  Sone of those shots look familiar, Mike.... :D
Title: Re: Open all hours. Butchers bike required.
Post by: Capt Troy Tempest on November 01, 2023, 04:38:26 PM
Found my “open all hours” character figures.
I need a butchers bike, preferably with basket for Granville.
Any suggestions please.

Like hippie with chain, gives me idea for girl waving as scarf. “Astley mania”

David sent me link for Blair and Johnson in handcuffs, can’t find them, anyone got link please.
Title: Re: Open all hours. Butchers bike required.
Post by: Overlord on November 01, 2023, 05:21:43 PM
I used the bicycle from the Foundry Home Guard set (Expensive if that's all you need though)
https://www.wargamesfoundry.com/collections/world-war-two/products/ww2017-home-guard-communications

Added a wire 'basket' on the front

(http://leadadventureforum.com/gallery/60/369-011123171023-605382338.jpeg)

Quote
David sent me link for Blair and Johnson in handcuffs, can’t find them, anyone got link please.
https://redstarcoven.com/collections/masters-of-war-1

Title: Re: Open all hours. Butchers bike required.
Post by: Capt Troy Tempest on November 02, 2023, 11:54:20 AM
Thankyou for link, nice idea on bike pinching that.

Interior of shop is great, did it come with building or is it something you’ve made. Very impressive.

Also can you remember the colours you used for Mr Barkers coat. Cheers.
Title: Re: Open all hours. Butchers bike required.
Post by: Overlord on November 02, 2023, 02:23:51 PM
Arkwrights is a complete scratchbuild for my Geezers game: https://leadadventureforum.com/index.php?topic=7181.195
(Most of the thread pics were messed up by the Photobucket debacle)

(http://leadadventureforum.com/gallery/60/369-021123141936-605642308.jpeg)

The shop 'interior' is actually photos stuck onto the flat walls.  The same was done with the terrace windows.

(http://leadadventureforum.com/gallery/60/369-021123135002-605631879.jpeg)

Arkwrights shop windows are a composite of several bits: photo of a shop window, scaled posters/advertising, odds n ends in various (small) fonts.  All put together before the window is glazed with clear plastic.  The shop door window is the one from the series.

The terrace net curtains are printed out from photographs. They are cut to size & glued into the window recess.  Next a piece of clear plastic as the glass. I then edge it with thin plastic strip for the frame.  All the windows are done like this, some with net curtains, others left plain.

(http://leadadventureforum.com/gallery/60/369-021123135002-60553283.jpeg)


Bit of a memory test for the coat colour (painted in 2010?). I think it was probably the Foundry Buff Leather (7) triad.

Title: Re: Open all hours. Butchers bike required.
Post by: HESH on November 05, 2023, 10:31:54 PM
That is terrific. 👍👍👍
Title: Re: The scale question again. Coach.
Post by: Capt Troy Tempest on November 08, 2023, 07:15:28 PM
So that old question again of scale.
I’ve decided if it looks right then it’s OK.

With all Christmas toys instore now started looking for a coach which I’ll turn into burnt out wreck.
Most I’ve seen so far would be great for 20mm scale.

My other vehicles have a wheel base of 43mm, any suggestions. There are collectors models out there but don’t want to pay those sort of prices for something I’m going to destroy.
Title: Re: The scale question again. Coach.
Post by: flatpack on November 08, 2023, 07:33:24 PM
This any good as a coach ?
I’ve shown it with 20mm figures.
Only £4 from Asda.
(https://i.postimg.cc/Nf6GMWRH/IMG-5352.jpg) (https://postimg.cc/2V5N99ck)
Title: Re: The scale question again. Coach.
Post by: Capt Troy Tempest on November 08, 2023, 08:06:37 PM
Have you taken it out of packaging yet, what’s the model’s width?
Need to find large Asda we have only medium sized in Stockport one aisle of toys and no buses checked yesterday. Neither “the entertainer.” or smiths toys, theirs are not wide enough, again great for 20mm but not 28mm.
Title: Re: Black cat bases miniatures
Post by: Capt Troy Tempest on November 18, 2023, 07:24:46 PM
Black cat bases did some nice miniatures, but they don’t appear to be trading any longer.

There is company in US that has part of their range available but not figures and cost a fortune to ship to U.K.

Does anyone know if someone else has picked up their range, believe some were made under license?

I so want the bacon butty guy.
Title: Re: The scale question again. Coach.
Post by: flatpack on November 18, 2023, 11:46:53 PM
Have you taken it out of packaging yet, what’s the model’s width?
Need to find large Asda we have only medium sized in Stockport one aisle of toys and no buses checked yesterday. Neither “the entertainer.” or smiths toys, theirs are not wide enough, again great for 20mm but not 28mm.

Hi, the coach is 32mm wide.
Sorry for the delay.
Title: Re: The scale question again. Coach.
Post by: vodkafan on December 01, 2023, 11:36:23 PM
This any good as a coach ?
I’ve shown it with 20mm figures.
Only £4 from Asda.
(https://i.postimg.cc/Nf6GMWRH/IMG-5352.jpg) (https://postimg.cc/2V5N99ck)

It looks just right to me, how will you fit that in a scenario?  A coachload of tourist hostages perhaps?
Title: Re: Black cat bases miniatures
Post by: CapnJim on December 03, 2023, 05:00:10 PM
It looks just right to me, how will you fit that in a scenario?  A coachload of tourist hostages perhaps?

It does look right.  And we once had a bus with passengers show up on its scheduled run in one of our US Prohibition Era gangster games.  They ended up getting caught in the cross fire between the cops and the gangsters...
Title: Re: Black cat bases miniatures
Post by: Capt Troy Tempest on December 04, 2023, 08:21:57 PM
I want to do burnt out coach/bus. You see them on most news casts when there’s civil unrest.

This is Katy Add for WBC handing back to the studio.
Will explain later, news crew on painting table.

They are offensive miniatures set, one dignitary is “sunny dee trump”, who is the other?
Title: Re: Black cat bases miniatures
Post by: Ultravanillasmurf on December 04, 2023, 08:31:35 PM
They are offensive miniatures set, one dignitary is “sunny dee trump”, who is the other?
A very good question. Also a very interesting find.
Title: Re: Black cat bases miniatures
Post by: CapnJim on December 06, 2023, 01:44:26 AM
They are offensive miniatures set, one dignitary is “sunny dee trump”, who is the other?

Methinks it might be Boris "Dahling" Johnson....????
Title: Re: Black cat bases miniatures
Post by: HESH on December 06, 2023, 01:58:54 PM
For coaches and bus fleet I use Corgi @1/50 scale . Plenty on EBay at reasonable prices.
Title: Re: Black cat bases miniatures
Post by: Capt Troy Tempest on December 07, 2023, 02:51:43 PM
Thanks for that Hesh, just ordered one from dealer, let me have it cheap as without box and has scratch.
Since I’m burning it, doesn’t matter.
Will post scale size to 28mm figure when arrives.
Title: Re: Black cat bases miniatures
Post by: HESH on December 07, 2023, 05:31:50 PM
That’s exactly what I do mate - source the unboxed and/or damaged. 👍
Title: Re: Protesters with bull horn
Post by: Capt Troy Tempest on December 08, 2023, 09:07:31 PM
 Looking for protesters with bull horn or something similar, think of protest march in film “who dares wins”

Found this, but pillows put me off.

Title: Re: Protesters with bull horn
Post by: carlos marighela on December 08, 2023, 09:21:37 PM
You'd have to fashion your own bull horn but this one suggests itself.

http://www.miniaturefigurines.co.uk/images/catalogue/792811a.jpg

The business end of disposable biros is my 'go to' source for cone shaped items. Simply cut to required size.
Title: Re: Protesters with bull horn
Post by: CapnJim on December 08, 2023, 10:29:26 PM
Offensive Miniatures do a "Police Support" pack, with a guy with a bullhorn.  https://www.offensiveminiatures.com/product-page/nfrp206-police-support-team-three

You could chop off the arm with the bullhorn and transplant it on a suitable civilian figure.  As long as you can use the other figs in the pack, of course...
Title: Re: Protesters with bull horn
Post by: HESH on December 09, 2023, 12:14:03 AM
You just after the bullhorn / loud hailer?
Title: Re: Protesters with bull horn
Post by: Ultravanillasmurf on December 09, 2023, 08:43:55 AM
Offensive Miniatures do a "Police Support" pack, with a guy with a bullhorn.  https://www.offensiveminiatures.com/product-page/nfrp206-police-support-team-three
For scale:
(https://3.bp.blogspot.com/-UChZR8FvS8U/TkNstpDuF4I/AAAAAAAAAEc/F_TAG4bkWgA/s1600/usualsuspects1.png)
From left to right: Offensive Miniatures Riot Police; CP Miniatures SF trooper; Crooked Dice Armed Minion with automaton head); Copplestone Guard in Beret; Offensive Miniatures Riot Police Sergeant and Hasslefree Neil (with Offensive Miniatures baton arm).
Title: Re: Protesters with bull horn
Post by: Ultravanillasmurf on December 09, 2023, 08:49:51 AM
I was convinced that Anvil had a bull horn in one of their accessory packs, but was unable to find it.
Title: Re: Protesters with bull horn
Post by: AKULA on December 09, 2023, 11:00:39 AM
Some good ideas there  :)
Title: Re: Protesters with bull horn
Post by: Digits on December 13, 2023, 10:11:12 PM
Looking for protesters with bull horn or something similar, think of protest march in film “who dares wins”

Found this, but pillows put me off.

Paint the pillows  as sacks of produce, liberated from ransacked store maybe?  I like the minis.



Title: Re: Protesters with bull horn
Post by: mikedemana on December 16, 2023, 10:09:43 PM
Great ideas here! I like the women with the sacks, but don't have a use for them at the moment. Looters is a great idea...  lol

Mike Demana
Title: Re: Protesters with bull horn
Post by: carlos marighela on December 17, 2023, 09:19:56 AM
Greenham Common... The Wargame.  lol
Title: Threat level figures.
Post by: Capt Troy Tempest on December 28, 2023, 10:35:46 PM
Given me idea Carlos. Need to buy model dome tent then two ladies with pillows can be camped out protesters.

Has anyone bought threat level emergency figures from pandyman. All my figures upto now are metal. Are they clean and easy to paint?
Title: Re: Threat level figures.
Post by: Ultravanillasmurf on December 29, 2023, 03:11:46 PM
Yup, I have some.
(https://blogger.googleusercontent.com/img/a/AVvXsEhmY_kzYnrBUvPSHbh3cdU5gkV3E1AR82lF6vrolgJ6S6UVRntveYn6b7snKSvlsaIpA7vfhN7m96LISUQ_Z7ilY-On6lO7AdEroPXFUSCbW_IVVSWTJPc_800M8kuF73wksEMTQdRLltg-_KoDHv5VqRUGq2l9ZxT72y1d7fq2yVIGg_6th0lY5VZuAQ=s538)
Now this one was way back when (Salute 2021).
At Warfare I bought some more, you can see the contrast in quality of the printing:
(https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEgWKp-hmJfLiLm3Eldo61Ohrg0cfwfXSbd3Hb-w3JzYfRheuMrSG2LFc74V_pvrBoequFH0eL8ghK9aV_iCP5dCp8zAxI2L4MIdtbGho3bU3GdpJx5xM5NYc_XHyPTEP7vjO0nfKS741ouFEgKrProWHimypwfhyyLKCCO5g4aUyHZDrpbRs-qMq_pxsgAU/s588/pandyman-2.png)

No William Killian this time.
(https://blogger.googleusercontent.com/img/a/AVvXsEib59Pj1AwUWW6N8lR9S11iffyMJ_ZnQf7YI8Sv0ad483VDmbsaq3uSAMFXn9wPh-Wfby-LBZit-qe12haXCXfKHgVQbWxvtySv3gu--BMVjMuXAXsWsDR-jN-cBo1QWabKNwmCmmkcDxJPF9Y9dYZPruu1O5vGrjHVu0XKI_m7supE5tVy1gaMkLsCPQ=s500)
Empress US Marine.
https://ultravanillasmurf.blogspot.com/search?q=Pandyman (https://ultravanillasmurf.blogspot.com/search?q=Pandyman)
Title: Re: Threat level figures.
Post by: Capt Troy Tempest on January 21, 2024, 09:05:05 PM
Thankyou for that. Added to wish list.

Just picked up police Range Rover today £8 from entertainer toys. Will post picture soon. Need to get another law person with cap, only got one, rest have helmets.

Painted offensive miniatures camera crew, however to finish them off I need to idiots that always appear in the background. Any suggestions.
Also any suggestions for tall thin mp wearing glasses. To represent a double barrelled surname current politician.

Update. Another toy for grandson. Vehicle to large when 28mm figure next to it.
Title: Re: Threat level figures.
Post by: Ultravanillasmurf on January 22, 2024, 06:33:00 PM
Well this Hasslefree figure is suitable for the background.
(https://hfminis.co.uk/wp-content/uploads/2020/03/HFA073-copyweb.jpg)

If you want a Range Rover
(https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEiCOXCXNm_Pc5RvhD3-wC2CQj0z_22qsylYKWfkY2bm9qtvl0RQdJDTvh7m-EOQQtTb0heXX7raSPN_8SPoZQGHpGK8HTN7hla-Kz1LPuS3ub_41ifeMVlIT6EkGYZD2N1vkUKy4M0rOaBqiZvCW_jO4dMpKj1KUe6hmS3tR1ZxYgARSrquoiAbmuO7jN0X/s500/anvil-pickup-5.png)
https://disainstudio.com/product/range-rover/ (https://disainstudio.com/product/range-rover/)
Title: Re: Threat level figures.
Post by: carlos marighela on January 22, 2024, 08:20:57 PM

Also any suggestions for tall thin mp wearing glasses. To represent a double barrelled surname current politician.


You are looking for something that's a cross between a public school boy and an undertaker presumably. I would look at either although finding a figure wearing an Eton tailcoat and top hat* is likely to be tricky. Someone did a range of public school boys for the VBCW IIRC and there are undertaker figures out there.

Then there's this: https://footsoreminiatures.co.uk/collections/inter-war-period-1918-1939/products/bank-manager. You'd have to fashion your own glasses. He at least has a double barrel shotgun as a visual clue to identifying his name. ;)

Personally I'd just break out the putty, make a tall, thin poo emoji and whack a top hat on it.

* Yes, I know they don't wear top hats at Eton anymore but it remains the popular trope.

Edit: Woodbine Design did the public schoolboys. All armed and none looking particularly like the thin streak of shit I think you have in mind.

https://www.grippingbeast.co.uk/TWDCSP09_Armed_Schoolboys_4--product--4096.html
Title: Re: Vendetta figure
Post by: Capt Troy Tempest on January 29, 2024, 08:34:29 PM
Looking for 28mm vendetta figure or figure with full van dyke beard.
Preferably without sword, need to put behind camera crew. Already ordered school girl giving rude gesture.
Title: Re: Vendetta figure
Post by: CapnJim on January 29, 2024, 10:17:07 PM
Cool fig,  But why do get the urge to change the position of his right pointer finger so it's clenched too...... :o
Title: Re: Vendetta figure
Post by: carlos marighela on January 30, 2024, 12:19:20 AM
Cultural differences.

That said, the two finger salute is on the wane. I actually had to explain its meaning to my teens who had already firmly grasped the single finger version. I've warned them off the Brazilian inverted OK sign as a measure of disrespect as it will not only prove too obscure for any local audience but may be mistaken for some weird neo-Nazi shit.
Title: Re: Vendetta figure
Post by: Ultravanillasmurf on January 30, 2024, 07:34:16 PM
Looking for 28mm vendetta figure or figure with full van dyke beard.
Preferably without sword, need to put behind camera crew. Already ordered school girl giving rude gesture.
I am surprised that there is no Guy Fawkes mask figures (or even just heads), but saying that there are no Salvador Dali mask heads either,
Title: Re: Vendetta figure
Post by: AKULA on February 03, 2024, 08:39:00 AM
Looking for 28mm vendetta figure or figure with full van dyke beard.
Preferably without sword, need to put behind camera crew. Already ordered school girl giving rude gesture.

CP Models have one wearing a hoodie...unfortunately holding a blade but easily replaced.

https://cpmodels.co.uk/shop/urb04-rioters-with-blades/

Offensive Miniatures have a couple in their rioters range

https://www.offensiveminiatures.com/product-page/nfrm208-8-masked-rioters
Title: Re: Tarmac bases
Post by: Capt Troy Tempest on March 20, 2024, 12:22:34 AM
I want to put my rioting figures on tarmac looking bases.
Instead of sand I’ve used chinchilla dust as a start.
Any suggestions on tarmac colour, looking out the window it’s definitely not black. Perhaps a good starting colours.
Any advice welcome.

Whilst asking anyone know the name of the green for U.K. ambulance crew uniforms. Hospital scrubs are hunter green but think that’s a lighter colour.
Title: Re: Tarmac bases
Post by: Ewart on March 20, 2024, 12:14:11 PM
U.K. Paramedics colour is bottle green.

As for tarmac try, https://ak-interactive.com/product/terrains-asphalt-250ml/ (https://ak-interactive.com/product/terrains-asphalt-250ml/)
Title: Re: Tarmac bases
Post by: carlos marighela on March 20, 2024, 10:02:13 PM
I want to put my rioting figures on tarmac looking bases.
Instead of sand I’ve used chinchilla dust as a start.
Any suggestions on tarmac colour, looking out the window it’s definitely not black. Perhaps a good starting colours.
Any advice welcome.

Whilst asking anyone know the name of the green for U.K. ambulance crew uniforms. Hospital scrubs are hunter green but think that’s a lighter colour.

Grey black as a base followed by lighter grey dry brushes. I usually end up with silver grey or a little ivory as the last one. But essentially you can start with lighter greys depending on what you are trying to match.
Title: Re: Tarmac bases
Post by: Capt Troy Tempest on March 21, 2024, 02:00:15 PM
Thankyou.

What colour are people using for yellow high viz jackets and orange high viz overalls?
Title: Re: Super glue
Post by: Capt Troy Tempest on March 25, 2024, 01:53:55 PM
Need help from all you knowledgeable people on this site.

In kitchen glueing sand to bases when phone rang. Came back to find figure base welded to kitchen work surface. Managed to free base, but now circle of set superglue on worktop.
How to I remove it without damaging surface if worktop.

Please help.
Title: Re: Super glue
Post by: Cubs on March 25, 2024, 02:26:32 PM
Spray with WD40 and set a hair dryer on it. Heat loosens the grip and the WD40 will help it slide off. Acetone (nail varnish remover) will do it, but could knacker your worktop. If that doesn't work, maybe just hot soapy water and a scouring sponge.
Title: Re: Super glue
Post by: Capt Troy Tempest on March 26, 2024, 08:49:16 PM
Thanks cubs hairdryer worked brilliantly.
Title: Re: Super glue
Post by: carlos marighela on March 27, 2024, 01:00:00 AM
Thanks cubs hairdryer worked brilliantly.

Did the wife raise an eyebrow as to why you were furtively heading to the kitchen carrying her hair dryer?
Title: Re: Super glue
Post by: Cubs on March 28, 2024, 08:53:49 AM
Thanks cubs hairdryer worked brilliantly.

Cool, glad to hear it.
Title: Re: Black uniforms
Post by: Capt Troy Tempest on April 05, 2024, 02:33:55 PM
Finishing off police and Saint johns.

How do you paint your black uniforms, just one coat of black or do you high light in any way?

Next question purchased hospital staff that are wearing the disposable apron. Any suggestions on colour, white does not look correct on model.
Title: Re: Black uniforms
Post by: anevilgiraffe on April 05, 2024, 02:50:36 PM
British Police uniforms? they're not black, just a very very very dark blue.
Title: Re: Black uniforms
Post by: Capt Troy Tempest on April 05, 2024, 02:56:17 PM
Police figures from football hooligan range, so uniforms 1970’s which I thought was black. May be wrong.
Title: Re: Black uniforms
Post by: Dags on April 05, 2024, 03:13:10 PM
British Police uniforms? they're not black, just a very very very dark blue.

This.

Add a little dark blue (Vallejo Dark Prussian Blue is ideal) to black. Layer up by adding tiny amounts more until the black has a blue sheen. Final highlight add a little pale blue-grey to the mix for edge highlights to the pockets, collar and creases.

Victorian, but the same principle applies....

(https://live.staticflickr.com/65535/49586931668_b46d00885e_o.jpg) (https://www.flickr.com/gp/150834069@N02/X8177t4z69)
Title: Re: Black uniforms
Post by: Ultravanillasmurf on April 05, 2024, 09:11:48 PM
I undercoated black a number of Police figures, then dry brushed with Vallejo Black Grey.
 I then washed the uniform with Citadel Nuln Oil.
https://ultravanillasmurf.blogspot.com/2018/08/bobby-on-beat.html (https://ultravanillasmurf.blogspot.com/2018/08/bobby-on-beat.html)
https://ultravanillasmurf.blogspot.com/2018/09/protecting-brenda.html (https://ultravanillasmurf.blogspot.com/2018/09/protecting-brenda.html)
Title: Re: Black uniforms
Post by: HESH on April 06, 2024, 12:54:23 AM
Cracking tips - very timely for me! Loads of blooming SAS to do!
Title: Re: Black uniforms
Post by: Iain R on April 06, 2024, 09:26:11 AM
British Police uniforms? they're not black, just a very very very dark blue.

While the Met have retained blue, I can assure you that elsewhere they are very definitely black...
Title: Re: Black uniforms
Post by: Ewart on April 08, 2024, 01:41:44 PM
While the Met have retained blue, I can assure you that elsewhere they are very definitely black...

Until they fade to a weird shade of grey…
Title: Re: Black uniforms
Post by: Capt Troy Tempest on April 08, 2024, 05:02:02 PM
Thanks for uniform advice.

Dug out some other police figures I have, first thing is to alter truncheons, they are more like war clubs.