Lead Adventure Forum
Other Stuff => Workbench => "Build Something" Archive => Topic started by: Burgundavia on February 02, 2024, 07:48:18 PM
-
I wanted to have some discussion about timelines and rules before we start up
Proposed Timeline
March 1 - Start
April 30 - Tools down
May 7 - All photos due
May 15-30 - Voting
Rules
We've already talked about 3D printing in the topic thread, but to clarify my thought is this: Any amount of 3D printing is allowed provided you design it yourself
Further, I think we shoudl clarify that purely functional parts - like Terra-former MDF bases or 3D printed Openlock bases are absolutely fine provided they aren't the full kit
Anything else I'm missing?
-
All sounds :D good to me.
What about bought laser cut mdf window frames?
I assume they are ok as I’ve used em before, just thought I’d ask ;)
-
All sounds :D good to me.
What about bought laser cut mdf window frames?
I assume they are ok as I’ve used em before, just thought I’d ask ;)
I think they're fine. Window frame or even something like commercially produced cornice, etc on a scratchbuilt building is clearly just using a few parts. Now a whole building kit, that's a different story.
-
I wanted to have some discussion about timelines and rules before we start up
Proposed Timeline
March 1 - Start
April 30 - Tools down
May 7 - All photos due
May 15-30 - Voting
Rules
We've already talked about 3D printing in the topic thread, but to clarify my thought is this: Any amount of 3D printing is allowed provided you design it yourself
Further, I think we shoudl clarify that purely functional parts - like Terra-former MDF bases or 3D printed Openlock bases are absolutely fine provided they aren't the full kit
What about bought laser cut mdf window frames?
I assume they are ok as I’ve used em before, just thought I’d ask ;)
This all sounds quite reasonable to me.
-
What is the topic this year? How does one apply to participate?
Thanks in advance.
-
What is the topic this year? How does one apply to participate?
Thanks in advance.
To participate, all you need to do is register interest when we open that, likely mid-Feb. Our topic this year is Workplace and your interpretation of that can be quite broad.
-
Sounds good...is there a size limit?
-
I'm in, but as usual have no idea what to make...yet. :D
-
Anything else I'm missing?
The same cap on commercial 3d elements as on manufactured parts. I am not designing my own but usually use 3d printed elements and details in the same way I use cast and commercial parts.
-
The same cap on commercial 3d elements as on manufactured parts. I am not designing my own but usually use 3d printed elements and details in the same way I use cast and commercial parts.
Agree. Last year we had "only 0-25% can be commercially bought items or figures." This we can rewrite this as "no more than 25% commercial produced parts or 3D print files"
-
I wanted to have some discussion about timelines and rules before we start up
Proposed Timeline
March 1 - Start
April 30 - Tools down
May 7 - All photos due
May 15-30 - Voting
Tools down means brushes too, or one can use the time till All photos due to finish painting if needed?
I'm okay with the proposed rules for 3D printing. And still somewhat undecided what to build :P
-
Tools down means brushes too, or one can use the time till All photos due to finish painting if needed?
I'm okay with the proposed rules for 3D printing. And still somewhat undecided what to build :P
I like the idea of having to post one final under construction on the Tools Down and then you have one week to finish painting. You can of course start earlier.
-
I'm totally rearing to go this time again! I've got a solid concept, (probably) all materials in the house and the leadtime is decent too...
I'm off to do some sketching :D
-
Me too! (Except for the sketching.)
-
All being well and with the wind in the right direction I’m going to try and actually enter this one - the theme is so open but I’m struggling to narrow down my ideas lol
Andrew
BeneathALeadMountain
-
I've got an idea and I'd like to enter...but as yet I don't have the head space for it. I'm trying to get on top of things at the mo so will just have to see where my heads at nearer the time.
-
I will be in, assuming work doesn't put its usual spanner in the works. :D
-
the theme is so open but I’m struggling to narrow down my ideas lol
I know exactly how you feel. :D
-
Me too! (Except for the sketching.)
You guys sketch?
I'm interested.
-
You guys sketch?
Absolutely not! lol
-
Let's just say that I can doodle a bit, but it'll always be sketchy... lol
-
I'm hoping to make it in. The Dark Pool of Dark Darkness was BSC 2021 and I haven't managed any LAF contests since!
Full disclosure: Burgundavia is my younger brother. Not that contest admin can particularly affect voting, but just wanted it out there!
-
Still High on Last years BSC I'd love to join again but the timing is the worst as I'll be in Japan from April 20 till May 11, that still leaves about a month and a half though, so maybe I can still pull something off, let me see if I can think of something that fits the theme, that's not too hard
-
I am hoping to make it in too. Just had about three weeks of bad flu and am still getting back into the swing of things.
-
I'm not sure if I have misunderstood or missed something, but are we signing up and starting building on the same day?
-
I'm not sure if I have misunderstood or missed something, but are we signing up and starting building on the same day?
No, I'll post something to start signup on Monday when I'm home from the conference in at, with the start next weekend.