Lead Adventure Forum

Miniatures Adventure => The Second World War => Topic started by: Fitz on 15 February 2024, 06:39:39 PM

Title: Wespe (15mm) for 3d printing
Post by: Fitz on 15 February 2024, 06:39:39 PM
My latest 3d modeling project in 1:100 scale (15mm) is a Wespe SPG.
The STLs are available now at https://www.wargaming3d.com/product/wespe/ (https://www.wargaming3d.com/product/wespe/)

(https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEhLDOR3i8P-TNSmrg2429W5KrBs37j-iY1MgWnR8M-dXbAidM61XdmXUQxjyGVsjEXv5pAPBrJUf58pYO14ZMFbLc8FMIDVZ8WMN50lUequ_RkRc9KLggXbdTXpqf2huPLA1ALMiCcJ-KChKjCEQh4IJclsPFj4q68zzAdijlZucPMBxBM2GptZX4jbspAD/s1000/2024-02-15_wespe_finishedmaybe2.jpg)

It can be printed with the gun horizontal, or elevated in an indirect firing position.

(https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEjhx9491wyE-b31nKAvLykRFlG93TyHxRiTw3VUOlceKVKPM7afU8MPy4xcr0E2OOumSRlh7HQJ8xPoNjoM3MpgvowccqbtMcqqLGlUZ7O_YgNLI5B7RA_igjMbrUv6apCON5aPOfLIBWKuTJ8HMR9zhF87TJ57uGT2LpRuMTx6DYVbRWXGAGiIPHDCNK4v/s1000/2024-02-16_wespe_elevated.jpg)

I've provided it as a kit of four components (fighting compartment and gun, hull, and two running gear modules) as well as a complete model that can be printed in one piece if you don't mind all the work of clearing out supports afterwards.
Title: Re: Wespe (15mm) for 3d printing
Post by: MaleGriffin on 15 February 2024, 06:44:03 PM
Great looking model!
Title: Re: Wespe (15mm) for 3d printing
Post by: Fitz on 16 February 2024, 08:36:45 AM
(https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEgZF5WrCr2E238HlH3oXIACjMHUsQB6tRbUBnbnERGO2Q_T7DyhnyMezKgT7ISGM3qzqfu0_58zVgR2Vz03qgBz9uLdKwpR9S2UPYKDkpEtfZ79IUyGnIkyWEgCo38__nDhm5HdsidqmU5XN-d6YcruL14fjoNEYpeVGg7IJue-bZwl9_YMhy5DYRSc-FFr/s800/2024-02-16_WespeAssembly.jpg)

They printed well, and the first one went together easy-peasy, so I'm counting that as a win.