Lead Adventure Forum

Miniatures Adventure => The Conflicts that came in from the Cold => Topic started by: Pattus Magnus on April 20, 2025, 09:06:50 PM

Title: Who makes 28mm police equipped with protective vests?
Post by: Pattus Magnus on April 20, 2025, 09:06:50 PM
I am hoping to find some modern police officer figures that are wearing tactical vests. So far I have seen quite a few modern police figures, but all are either missing the vests or are fully kitted out for riot control or SWAT duties. Do police figures with basic protective equipment even exist?

Any help would be appreciated at this point!
Title: Re: Who makes 28mm police equipped with protective vests?
Post by: CapnJim on April 20, 2025, 09:14:26 PM
While many US police officers are wearing tactical vests now, with plates integral to the vests, many others still wear their vests under their duty uniform shirts.  Police figures that are "just" wearing duty shirts could still be regardied as wearing armor - it'd just be under their shirts... 
Title: Re: Who makes 28mm police equipped with protective vests?
Post by: carlos marighela on April 20, 2025, 09:49:45 PM
Urban Beat, does/did a range of Bobbies in flat caps and wearing stab vests. Think early 2000s episodes  of The Bill. Most if not all are tooled up with MP5s, maybe best if you need a TSG.

The ironically named Hasslefree produce a range of bobbies based on Hot Fuzz, in stab vests and with a variety or arms options. Caveat emptor and the best of luck ordering them in the lottery that is doing business with HF.

See, American cops aren't fat after all. It's just their tactical armour that makes their bums look big in uniform.  lol
Title: Re: Who makes 28mm police equipped with protective vests?
Post by: Rick on April 20, 2025, 10:48:48 PM
I had a few of those Urban Beat figures as I was also looking for UK cops - not terribly impressed by them, I'm sorry to say. The closest I came was the Eureka multipart SWAT figures with Gripping Beast WW1 British caps as flat hats but they were a touch small in comparison with other ranges. Still looking.
Title: Re: Who makes 28mm police equipped with protective vests?
Post by: Cholmondely Percival IV on April 20, 2025, 11:11:42 PM
You don't say whether you're looking for US, UK, or other nations' police. Spectre Miniatures, while a UK company, seem to concentrate on law enforcement officers from the USA. However, I  can only see two on their website who are visibly wearing vests, one of whom is an FBI agent and the other a Texas Ranger, but as noted by CapnJim, this doesn't necessarily mean that some of the others - SWAT teams aside - are not doing so discreetly.

https://spectreminiatures.com/collections/swat
Title: Re: Who makes 28mm police equipped with protective vests?
Post by: Pattus Magnus on April 20, 2025, 11:39:20 PM
Ideally, they would be suitable as Canadian patrol officers. Uniforms vary im Canada a bit between RCMP and the various provincial and city/ municipal police forces, but a “paint conversion” would do in most cases. They’re similar to US and UK police in flat caps. At this point I’m less worried about uniform details than the body armour, which has been issued by the Canadian police forces I’m familiar with for at least 20 years.
Title: Re: Who makes 28mm police equipped with protective vests?
Post by: FinnN on April 20, 2025, 11:50:39 PM
Some of the Pandyman range sounds like it might fit the bill:

https://www.pandyman.co.uk/threatlevelshop
Title: Re: Who makes 28mm police equipped with protective vests?
Post by: Pattus Magnus on April 20, 2025, 11:58:23 PM
FinnN, yeah, some of those could work with the right paint job.
Title: Re: Who makes 28mm police equipped with protective vests?
Post by: Ultravanillasmurf on April 21, 2025, 10:00:32 AM
Some of the Pandyman range sounds like it might fit the bill:

https://www.pandyman.co.uk/threatlevelshop
Just about to mention them.
(https://blogger.googleusercontent.com/img/a/AVvXsEhmY_kzYnrBUvPSHbh3cdU5gkV3E1AR82lF6vrolgJ6S6UVRntveYn6b7snKSvlsaIpA7vfhN7m96LISUQ_Z7ilY-On6lO7AdEroPXFUSCbW_IVVSWTJPc_800M8kuF73wksEMTQdRLltg-_KoDHv5VqRUGq2l9ZxT72y1d7fq2yVIGg_6th0lY5VZuAQ=s538)
One of their original ones.

And here are some I got at Warfare 2023 with improved print (my suspicion is the original ones had been "smoothed").
(https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEhNL5YhE6SqjXVxleBgXL07ovgNsIgo52pgoKr8P6LYPWiyy29fpLf2kup6F717qnfJafZd9LH4I9D3zCNLO7I3qdXRlOUltlYqbjwoRYMc_zSKxTMBj5zHL51D_GqZ63DKiapS7qDDjhUQrlHkgrm68WapOPGUTVXcYKXIEv6AOBjbcWycPRVK09TBs5qC/s500/pandyman-1.png)

(https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEiX6xUKnFelJgfEX2wFAJPzsADpDQmfMp7AJgTrLW96d3zlzDK6DsEdQY4F5HicRAO3WPHen_kIxe9A8s-6AiUmh25c9pFEO2TOW52JVZQ9uD4lD6R8SysDqJuCjj1hluZgmtsg43muA1fyE077vijo3oOz4-bV1FNzqixwvDBDEZKJeKq6mTtUUuu9i6S7/s500/pandyman-3.png)

They also have firemen and medics.
Title: Re: Who makes 28mm police equipped with protective vests?
Post by: Ultravanillasmurf on April 21, 2025, 10:03:43 AM
There is also Crooked Dice, a combination of the X-Commando bodies and various police heads.
(https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEggv5iE9sqvumA_mh9jlhc4lseOObeGDFk05RBd0F3uVI3DS5fv4eB5ifZ_38S8QsVZS_XcYREXQuR6WOUdyoz-ro6pDMmoULORM4AOmPd382KYVvJLaGPZBIqHVe9pyOY0IcruZamq1kiz/s1600/qfo1-2.png)

(https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEibEoahfAiI6lzIZNKu6wnL7CpuJZ5JWpMsGTxs4YHt9SRzH0tWS8vbT_FGpWXKDd1n6nVmsyiO3QeFpOhkQwu35sa-nyL1rn9-RvAIWJgs3_GTI4zXyqrmGHebCf4ctxS6S_CJJy9z1eAG/s1600/rasp1-11.png)
Title: Re: Who makes 28mm police equipped with protective vests?
Post by: carlos marighela on April 21, 2025, 10:10:01 AM
I like that last one. June Ackland gets angry.
Title: Re: Who makes 28mm police equipped with protective vests?
Post by: Ultravanillasmurf on April 21, 2025, 10:18:50 AM
If you want serious tactical gear, you could combine Empress US Army with suitable heads.
(https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEijR-B8x-Xgxj90yX1xtBf8lLY_i2JVA15LTbdA3VFmLG70R59PD_tRo-kt9G4cw2iN3f30a9f3BJQHJoAjjF2F-VzFB6KYvKm6yZqtfsgYWt5CL5LrN-pCXPXLwL8QkgWqYY2AyyH0baAq/s572/leo-3-3.png)

(https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEh6G7Sf6ptJciDe-KrjCimh7fzvY-WWn-_XRDHxTXfYMxBxNVnczKzUceqe_7YWKMrX0hDaoKtX7sSdcCzOnXm7GtYldZE71jyZrjvmTRsZpEmTfssvVk2Vh8GFA-0O2m5hO5KOuLKvGeL1/s1000/leo-1.png)

Crooked Dice have North American and UK style police heads.

(https://crooked-dice.co.uk/cdn/shop/files/CityCopheads.png?v=1724967539&width=713)
(https://crooked-dice.co.uk/cdn/shop/files/Helmettedsoldierheads.png?v=1724941543&width=713)

(https://crooked-dice.co.uk/cdn/shop/files/PoliceFlatCapHeads.png?v=1724595980&width=713)

(https://crooked-dice.co.uk/cdn/shop/files/PoliceCustodianHelmetHeads.png?v=1724595890&width=713)


And for female  PSNI
(https://crooked-dice.co.uk/cdn/shop/files/TLSCaps.png?v=1724933431&width=713)



Title: Re: Who makes 28mm police equipped with protective vests?
Post by: carlos marighela on April 21, 2025, 10:22:10 AM
There really does need to be a 'not Frank Burnside' figure. 'You're nicked sunshine!'
Title: Re: Who makes 28mm police equipped with protective vests?
Post by: Rickf on April 21, 2025, 01:07:26 PM
Here you go, exactly what you're after.
https://www.warfighterminiatures.com/ukpolice
Title: Re: Who makes 28mm police equipped with protective vests?
Post by: Rick on April 21, 2025, 01:33:59 PM
Here you go, exactly what you're after.
https://www.warfighterminiatures.com/ukpolice
A bit too American and not quite Canadian, though, aren't they?
Title: Re: Who makes 28mm police equipped with protective vests?
Post by: Rickf on April 21, 2025, 01:51:16 PM
A bit too American and not quite Canadian, though, aren't they?
They're firearms cops wearing tacvests, exactly what he asked for, British not American.
Title: Re: Who makes 28mm police equipped with protective vests?
Post by: Sgt_T on April 21, 2025, 02:16:38 PM
How about these:

https://forlornhopegames.co.uk/category/future-warriors/para_military (https://forlornhopegames.co.uk/category/future-warriors/para_military)

T

Title: Re: Who makes 28mm police equipped with protective vests?
Post by: Ultravanillasmurf on April 21, 2025, 02:46:19 PM
For my Specialist Firearms Officers I used Empress Delta Force figures.
(https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEhnY-LOkshc2TQwPy2gpkwkn2duT8a7UqjO8Tm3IlecJnd3sPkwrxAia4f1YLecClVSZQwyg6o9YTSL_mLW7ns-CAdHjJ4YFSRiHa_awvwt0d3if4tQqIW7ZCd2-q-yRSWx5zl5dQCwLbBk/s1600/sfo-1.png)
Title: Re: Who makes 28mm police equipped with protective vests?
Post by: Pattus Magnus on April 21, 2025, 05:22:44 PM
Thanks for the suggestions everyone, I was not aware of several of the companies mentioned. I should be able to find something that will get close to what I am looking for.