Lead Adventure Forum
Other Stuff => Workbench => Topic started by: Westfalia Chris on 19 June 2007, 08:33:51 PM
-
Well then, I´ve finally started construction on my new games table, composed of 60x60cm/24x24" boards.
To get "into" the pattern, I started with a simple plains board and one with a railway track (since I plan to predominantly use it for Old West, RCW and SCW games). Next will be a pair like the first, then a bunch of birch copses, and as the conclusion to the first stage two more plains boards, maybe one with a gentle hill.
Long-term planning consists of:
3 modules of railroad tracks, 2 modules of river and one with river and railroad bridge, 4 modules of plains, and one or two hill modules.
The basic construction is 1/8th inch MDF and 1.2 inch XPS styrofoam.
(http://www.dminis.com/images/img.1182280753094.jpg)
A close-up of the railway line, rather Russian in appearance due to the wide gauge (ca. 1/51st scale of Russian 1524mm wide gauge) and the raised embankment. Still wondering how I shall build a road crossing (if any).
(http://www.dminis.com/images/img.1182280874179.jpg)
Telegraph poles are separate.
-
that railroad looks awesome, Chris!
-
Yes, I´m rather happy with the look, too. I used Balsa wood sleepers and rails cut from 90cm FlexiTrack, of which I bought four lengths (3.60m) when they were discounted (2,- apiece or so) at my local Model Rail Road store. I originally planned to use the tracks "as is" for 20mm WW2, building a BP-42 from paper, but since I haven´t done any 20mm in a year or so, I thought I could "rip them up" and use them for this table project.
Best of all, since both Spain and Russia used wide gauge, and some American railroads did as well, I can use the table for my three favourite periods.
On a funny sidenote, I had considered using nails to make it look more authentic (4 nails per sleeper!), but couldn´t find any which where small enough, so I discarded that idea... for the moment.
-
Really smells like a White Invasion.. :lol:
-
Looks excellent and with Brent's Armoured train coming from Company B whose side are you joining?
God Bless
Helen
-
:o :love: Must Game with it :love:
-
The little bits of grass between the rails is a nice, nice, touch.
-
Chris - that's a lovely set of boards!
2 weeks ago, I also started thinking of doing a set of boards like yours, so I can do sunken river beds and so on. However, my main problem now is storage space.
-
Chris - that's a lovely set of boards!
2 weeks ago, I also started thinking of doing a set of boards like yours, so I can do sunken river beds and so on. However, my main problem now is storage space.
Hi Dom
I've ANZAC Cove in my small storge/laundry room plus a Trench system for the Third battle of Kritha. :) Not to mention half of the Western front in ruin buildings, Middle-East, Black Forest, Amazon River (okay streching it there) but I do have a long river and road sections from Armourcast and Gladiator games. Then there are the hills, more trench systems, barb wire etc. Oh boy it doesn't stop! Mostly in storage containers to keep out the dust.
Good luck with yours.
God Bless
Helen
-
Very nice boards,I reallyliek the raised railway tracks, it makes them look quite imposing.
I'd like to see some pics when the train is on them too :)
-
It looks great, a lovely bit of terrain. You know what I was thinking when I saw it...for pulpy goodness...a chain gang with the Guards and the obligatory dog walking the line while the chain gang (Laurel and Hardy in stripey clothing) shoveling ballast.
A lovely piece of work :)
-
Looks excellent and with Brent's Armoured train coming from Company B whose side are you joining?
Why, the side of the brutally oppressed proletariat, of course... :lol:
However, I´m thinking of only adding "removable Communist decoration" to the train once I get it done, like flags, and a red star up front which can be attached using a small magnet, so I can lend it to other opponents when we game...
Chris - that's a lovely set of boards!
2 weeks ago, I also started thinking of doing a set of boards like yours, so I can do sunken river beds and so on. However, my main problem now is storage space.
Ah yes, storage space... I´m a bit concerned about that too, but since the initial set will require only a space of, ca. 30x60x60cm, it will not be too much of a problem. I´m leaving the "plains" boards without too much detail, so I can stack them. And they´ll be far easier to transport than my old 60x120cm boards.
And finally, yesterday, I took a walk along our local riverlet... up north, it still is straightened, but the banks are densely grown, with reeds and all that, and I really want to include that along my river. Considering that, what width would you folks consider practical, yet looking suitably imposing? I´m thinking about using a total width of 6-8" at the top level (ie where the surface slopes, tapering down to a river width of 4-5" at the bottom...
-
On a funny sidenote, I had considered using nails to make it look more authentic (4 nails per sleeper!), but couldn´t find any which where small enough, so I discarded that idea... for the moment.
I felt I have to show you this:
http://www.ares-server.com/Ares/Ares.asp?MerchantID=RET01229&Action=Catalog&Type=Product&ID=83448
This company, www.micromark.com is quite fantastic, btw, in that they have the most extraordinary collections of tools and materials for the hobbyist. Look arround a bit and I think you'll know what I mean. I used to order from them quite often when I lived in Chicago (three cheers for american logistics in general and USP in particular). Still do, actually, but not so often since it is so bloody expensive to ship things from the US.
-
Interesting, but still looks too large (I assume they are made for II and IIm gauges), and especially too thick. My sleepers are only 5mm wide, so...
But nice stuff, thanks for the hint.
-
Hats off Chris.
Excellent work !!!!
Björn
-
Amazing work, Chris. Hand-laid track is considered the sign of craftsmanship in model railroading, and you've really put it to good use here.
The modular boards idea is brilliant, and I love the overall effect. Well done!