Lead Adventure Forum
Miniatures Adventure => The Conflicts that came in from the Cold => Topic started by: Overlord on 18 December 2010, 10:44:31 AM
-
(http://img.photobucket.com/albums/v480/overlord_awc/KKBB/Bond007black.jpg)(http://forbiddenplanet.co.uk/blog/wp-content/uploads/2008/10/James%20Bond%20You%20Only%20Live%20Twice%20Ken%20Adam%20set%20design.jpg)
As some LAF members will be aware I have wanted to build an underground/volcano base for a secret agent game for some time. Other commitments prevented me doing much work on it for most of the year, but I have finally found a bit more time. The complex will form the basis for a game at Salute (http://www.salute.co.uk) using the 7TV Rules from Crooked Dice (http://www.crooked-dice.co.uk/index.html), due out in the New Year.
Laboratory and Bio-containment facility.
You will note the air-conditioning shafts located at the rear of the lab. Worth remembering should a discrete entry or exit be required.
(http://img.photobucket.com/albums/v480/overlord_awc/KKBB/WIP/Lab03.jpg)
The main Laboratory providing the scientific support for the global evil.
(http://img.photobucket.com/albums/v480/overlord_awc/KKBB/WIP/Lab04.jpg)
The Bio-hazard containment area.
(http://img.photobucket.com/albums/v480/overlord_awc/KKBB/WIP/Lab05.jpg)
Viewing port into the containment area. The padded table awaiting the fate of some poor individual, no doubt.
To the right is another view of the entrance to the airlock.
(http://img.photobucket.com/albums/v480/overlord_awc/KKBB/WIP/Lab06.jpg)
An overhead view of the airlock and containment area.
(http://img.photobucket.com/albums/v480/overlord_awc/KKBB/WIP/Lab07.jpg)
-------------------------------------------------------------------------------------------------------------------
The complex will be a modular build for ease of storage and tranportation. It allows the various parts to be assembled in different layouts. It will also enable me to use it for Aliens/Sci-Fi, Zombies, Stargate, Weird War, etc, as well as 7TV/KKBB games.
Construction is of 5mm Foam PVC walls on a 3mm MDF base covered in a tile effect embossed plastic card, forming one large room.
This can be sub-devided by a removeable air-lock and viewing port built from 3mm and 5mm foam PVC, a clear CD case and plastic card.
A/C grille is of etched brass with framing in plastic strip.
All contents and air-lock doors supplied by Mark Copplestone: http://www.copplestonecastings.co.uk/range.php?range=FW
EQSET2. Medical Examination Room
EQSET3. Science Lab
EQSET4. Hi-Tech Research Lab
EQ5. Bio-Hazard Security Entrance x2
It is likely that most/all building for the complex will be done before I start painting so that I can keep an element of commonality to the finished project.
"Do you expect me to draw cards Goldfinger?" "No Mr Bond, I expect you to dice!"
-
Paul, stop being awesome.
It's not fair, share a little! lol
Seriously, really good work. Looks like this is going to be another very active blog! :)
-
Nice one Paul - am glad you are doing this.
This exact same thing was my suggestion for the Frothers Salute game a couple of years back, but we went with zombies instead - its still on my list to do one day, but thankfully someway back down the to-do list.
I look forward to seeing your take on it - am sure the quality will be top notch throughout.
8)
-
Loving your work Mr Smith!! :)
-
Yea! Another overlord project! I'll be keeping a close eye on this one!
Good start!
-
Looking good Paul, it will certainly be a View to a Thrill.
-
Wonderful Paul. Been looking forward to this production! :D
Will there be a shark tank and a missile silo? ;)
And a Goldfinger-esque model of Fort Knox - diorama within a diorama style, that rises from the boardroom table?
-
Very very nice. I'll be following this closely all the better to acquire your secrets Mr Overlord. Underground modular bases seem all the rage as two days ago I just cut the hardboard tiles for mine.
Just a question on the airshafts. Will you be opening up the ends to connect to other tiles or will you be abstracting it during play. Curious.
-
Please keep the photos coming.
-
WOW :-* :-* :-*
This is going to be great.
Will watch with interest.
How big is the base going to be when finished?
-
wow, that's inspiring :-*
-
Very good Mr. Smith. :D
Look forward to seeing what else you come up with.
-
I'm with everyone else on this one, Paul. And I really look forward to this project as you have an ability to do your stuff really, really well :)
Damn, I really should try to attend Salute this year :/
-
Very cool board! Can't wait to see this develop.
-
Will it include a monorail and the orange boiler suited gentlemen you can see in the pic?
-
What a fantastic-looking project.
Construction is of 5mm Foam PVC walls on a 3mm MDF base covered in a tile effect embossed plastic card, forming one large room.
After your Geezers building epic, I'm a tiny bit disappointed that you're not hand-scribing the floor tiles though! ;) :D
-
Oh yes, this is going to be good! Andym is on the same wavelwngth as me, will we see a monorail? A working one of course. ;)
-
Thanks for all the feedback/encouragement chaps. :)
Will there be a shark tank and a missile silo? ;)
Definately a shark tank (already part-built) and more a launch tower than a silo.
And a Goldfinger-esque model of Fort Knox - diorama within a diorama style, that rises from the boardroom table?
Not sure I've got space currently but wish I had thought of that. Something to build post-Salute to include in my own games.
Very very nice. I'll be following this closely all the better to acquire your secrets Mr Overlord. Underground modular bases seem all the rage as two days ago I just cut the hardboard tiles for mine.
Just a question on the airshafts. Will you be opening up the ends to connect to other tiles or will you be abstracting it during play. Curious.
I've been following your Hadleys Hope thread with great interest as an Aliens fan and for possible ideas/tips for this project. 8)
The airshafts are generally modelled as closed at the edge of each 'module' (the shafts add stregth to the 'modules' as most are open on one side) as I intend eventually using them in various configurations at a later date, though they are deemed continuous for game purposes. The shafts are over-sized really but I built them big enough to place a based miniature in the shaft for gameplay purposes. After all, shouldnt every secret lair have such a system of ducts to allow the heroes adequate entrance/exit!
How big is the base going to be when finished?
Current plans are 3'x3' but will likely be extended post Salute.
Will it include a monorail and the orange boiler suited gentlemen you can see in the pic?
I've run out of space on the Salute board, but I definately want a monorail at some point. Copplestone boiler-suited goons are sat awaiting paint although the Salute game miniatures will likely be provided by Uti Long Smile from his great collection.
In general I have constraints as to what I can build due to lack of storage space (Geezers takes up more room than any other project I have). I have a very long way to go to get vaguely close to the original inspiration by Ken Adam http://www.jamesbondwiki.com/page/Blofeld's+Volcano+Lair
(http://www.greenwichlibrary.org/blog/eds_blog/live_twice.jpg) (http://4.bp.blogspot.com/_sU7XPiqn5dI/SZia_4gaM_I/AAAAAAAAALc/-FPvlSUQI2o/s400/AdamVolcanoSketch.jpg)
-
I don't know why, but I've never really appeciated the scale of the James Bond sets until I seen your pic minus all the extras!
Blooming heck! :o
-
The Prisoner..... no, not some quaint, picturesque village.
Where would an Evil Overlord TM be without somewhere to secure his captives prior to explaining his devious plans for world domination in detail. Of course it is specified in the secret lair planning regulations that there should be an adequate means of escape from an otherwise impregnable headquarters, hence the handy grills leading to the air duct system.
The cellblock shown with the (Ainsty/Old Crow http://www.oldcrowmodels.co.uk/aiblastwall.htm ) blastwalls that will form the exterior walls of the 'rooms' part of the complex. In the foreground is a scratch-built entrance door. At the far (currently empty) end of the block will be something where the major villain will have an expectation of the heroes demise.
(http://img.photobucket.com/albums/v480/overlord_awc/KKBB/WIP/Cells02.jpg)
The solid cell doors and slightly less secure air duct grills. (The front is only blu-tacked in place at the moment)
(http://img.photobucket.com/albums/v480/overlord_awc/KKBB/WIP/Cells04.jpg)
A view of the cells from the opposite side.
(http://img.photobucket.com/albums/v480/overlord_awc/KKBB/WIP/Cells05.jpg)
Closer detail of a miniature inside the air ducts.
(http://img.photobucket.com/albums/v480/overlord_awc/KKBB/WIP/Duct01.jpg)
Construction is again 3 and 5mm foam PVC on an MDF base.
Be seeing you..... o_o
-
Hurray! Been waiting to see this project realised after all the conversations earlier in the year. Its looking great so far. :)
-
I think we've all been looking forward to this one for a while now. :)
Can't wait to see the finished layout.
-
My Copplestone scenery pieces have begun to stink like kerosene. They are going to need a good sealant!
-
You beauty!!!!!!!
-
Enjoying this - looks like an awesome project.
I see myself stealing bits - the air ducts idea is cool! (pun intended lol)
-
I agree, how could we ever go without air-ducts to escape trough?
-
:-*This project is really great and shows alot of great craftmanship!
Dibbs on Jaws!
-
My Copplestone scenery pieces have begun to stink like kerosene. They are going to need a good sealant!
Unfortunately cheap resin does pong and is not good for your health at all, (as in cheaper materials not poor casting results).
Agent Smith, another excellent project sir, carry on. ;)
The Commander
-
At the far (currently empty) end of the block will be something where the major villain will have an expectation of the heroes demise.
Once the hero is strapped to the device ready for his demise will the major villain trumpet on for five minutes, revealing his plans for world domination/destruction and thus revealing any flaws in his nefarious machinations which the hero will be sure to exploit after his imminent escape?
Great work on the build, you make it look so easy. Where do you source your foam PVC from?
-
Great work on the build, you make it look so easy. Where do you source your foam PVC from?
Because I could see a potential use for alot (For this and other projects) I bought 8'x4' sheets of 3mm and 5mm from Ebay.
http://business.shop.ebay.co.uk/Printing-Graphic-Arts-/26238/i.html?_catref=1&_fln=1&_ssn=roberthornegroup&_trksid=p3911.c0.m282
1mm, 2mm and other thicknesses are available in smaller sizes fron Antenociti. It was Jeds mention of foam PVC on Frothers some time ago that put me onto it. http://www.antenocitisworkshop.com/materials-tools/sheet-materials.html
-
Thanks Paul, I think I'll give the stuff a bash.
-
Control Centre The satellite is now over... Kansas
Every major villain needs somewhere to monitor the progress of his latest plan for world domination. Of course a 'Self-destruct' button is fitted as standard.
Overall view of the Control Centre with Ainsty/Old Crow Blastwalls and doorway. The upper level is completely separate so that I can use the basic walled module for other things (same as the Laboratory module).
(http://img.photobucket.com/albums/v480/overlord_awc/KKBB/WIP/Control01.jpg)
The upper floor is clear (and only part assembled here, ignore the plastic strip lying around). Once again the air-ducting and grills at the back of the room.
(http://img.photobucket.com/albums/v480/overlord_awc/KKBB/WIP/Control02.jpg)
Right-hand side with Laboratory next door. Floating staircase to the upper level.
(http://img.photobucket.com/albums/v480/overlord_awc/KKBB/WIP/Control04.jpg)
Left-hand side with upper level door to adjacent module.
(http://img.photobucket.com/albums/v480/overlord_awc/KKBB/WIP/Control05.jpg)
More foam PVC for walls and stairs. CD cases for clear flooring.
Copplestone equipment. http://www.copplestonecastings.co.uk/range.php?range=KKB
KKBBX1 Secret Base Control Room Set
KKBBX2 Missile Silo Control Room Set
KKBB303 Databank
A large world map/video screen will be added above the upper level wall.
"The firing power inside my crater is enough to annihilate a small army. You can watch it all on TV."
-
Ooo, missed this one.
Great stuff Paul :-* :-* That's going to be a cracker to play on :-*
cheers
James
-
Loving it, and as Agent Bibbly says its gonna be a great game ;D :-*
-
It just gets better and better, its a pity you will have to blow it up at the end of the game :D
-
Looking great :-* :-* :-*
Does the control room not need a large leather lounge chair (throne) for the big boss? Of course the minion killing controls are mounted in the arms of the chair lol
-
Lovely Paul :)
Did you have to remortgage your house to fund all that resin?! ;)
-
I remember you mentioned this project to me a long time ago, and its great to see you get a start on it! Can't wait to see more!
-
The glass floor is a nice touch Paul. Coming along rather splendidly.
-
I'm doing a little happy dance as I write the 7TV scenario for this :)
-
Gets better and better - love that staircase! :-*
-
Does the control room not need a large leather lounge chair (throne) for the big boss? Of course the minion killing controls are mounted in the arms of the chair lol
There will definately be a 'Blofeld' chair but it will likely be in another room....
Did you have to remortgage your house to fund all that resin?! ;)
Not quite! I did buy all the Copplestone resin in one go so got a small discount from Mark.
All the Ainsty/Old Crow items (and there is a lot more than has appeared so far) was picked up very cheaply from a second-hand trader at Colours and the B&B at Milton Keynes in 2009. Given the price and time saved I decided to use it rather than build everything from scratch (Yes I know this is the same person that has the little brick fetish!)
It just gets better and better, its a pity you will have to blow it up at the end of the game :D
lol Excellent Phil
-
Villains Lounge:
A sort of retreat and all-purpose room for when "No.1" wants to get away from all the flashing lights and buzzing, clicking sounds of the busy Command Center (tends to upset the cat, too!). The Lounge serves as personal office, conference room, relaxation area and rumpus room. It also has a combination disciplinary feature/discrete "waste-management" system.
(http://img.photobucket.com/albums/v480/overlord_awc/KKBB/WIP/Lounge01.jpg)
Nice stone flooring and walling provides a relaxing environment. The (removeable) doorway leads to a lift-shaft/escape pod/etc.
(http://img.photobucket.com/albums/v480/overlord_awc/KKBB/WIP/Lounge05.jpg)
Stairs leading up to the "pool" area, with bridge and doorway into the Command Centre.
(http://img.photobucket.com/albums/v480/overlord_awc/KKBB/WIP/Lounge04.jpg)
Very relaxing to watch fish swimming in a tank. Just dont disappoint the boss too much......
(http://img.photobucket.com/albums/v480/overlord_awc/KKBB/WIP/Lounge03.jpg)
Construction, once again is MDF and foam PVC with some plastic card for the walls and flooring. The pool surface is clear perspex, but the protective film is still on it currently. Unlike the previous modules this one has 4 walls as, at a later date, I will use it (minus the sharks) as part of a luxury house complex on a hill/mountain top ("I see you've met my friends Bambi and Thumper").
No other items acquired/built yet for the interior. I do need to build a large, high-backed leather chair though. Sharks (now OOP) from HLBS.
"This organization does not tolerate failure"
-
Brilliant and inspiring. Now I've got to have a lounge like that.
Cheers
-
Absolutely brilliant, it's great to see how it's supposed to be done from the ground up. I have been using foamcore for buildings, how does the foamed PVC compare for ease of cutting - I usually have lots of windows! Also what glue to do you on the PVC?
Thanks
-
Loving the shark :-* :-* :-*
Great touch lol lol lol
-
I have the same shark sitting in a draw for the exact same purpose - a shark pool for a spy game.
It has been sitting there for almost two years as I have no idea on how to make the pool and the water, so I will be very interested to see what you do with yours :D
-
Inspired stuff Paul. Can't wait to see that Pool!
Although...
(http://www.artinfo.com/media/image/98978/AA0708_GRN_027.jpg)
-
Great stuff Paul! This project is starting to look big already
-
I have been using foamcore for buildings, how does the foamed PVC compare for ease of cutting - I usually have lots of windows! Also what glue to do you on the PVC?
Foam PVC cuts fairly easily. Use a sharp blade and make several passes to get the cut rather than try and force it in a single go. Obviously the thinner sheets cut very easily. 5mm is a little harder but is fine with multiple passes. It is much stronger than foamcore so you can use thinner foam PVC for the same result. 3mm is still stronger than 5mm foamcore.
For glue I use a thick superglue (Rocket Max). Edges bond exceptionally well and minor sanding or keying helps on the flat faces. Generally very strong, just dont make a mistake with it (as I have done on several occasions) as the bond (:D) is very hard to break!
-
Foam PVC cuts fairly easily. Use a sharp blade and make several passes to get the cut rather than try and force it in a single go. Obviously the thinner sheets cut very easily. 5mm is a little harder but is fine with multiple passes. It is much stronger than foamcore so you can use thinner foam PVC for the same result. 3mm is still stronger than 5mm foamcore.
For glue I use a thick superglue (Rocket Max). Edges bond exceptionally well and minor sanding or keying helps on the flat faces. Generally very strong, just dont make a mistake with it (as I have done on several occasions) as the bond (:D) is very hard to break!
Stonking architecture, as usual, Paul. I've always been drawn to KKBB but refrained because of the project load I already have. You are making it twice as hard.
This foam PVC has the marks of being the Next Great Material after cork board. Where does one find it? Atenociti?
-
Because I could see a potential use for alot (For this and other projects) I bought 8'x4' sheets of 3mm and 5mm from Ebay.
http://business.shop.ebay.co.uk/Printing-Graphic-Arts-/26238/i.html?_catref=1&_fln=1&_ssn=roberthornegroup&_trksid=p3911.c0.m282
1mm, 2mm and other thicknesses are available in smaller sheet sizes fron Antenociti. It was Jeds mention of foam PVC on Frothers some time ago that put me onto it. http://www.antenocitisworkshop.com/materials-tools/sheet-materials.html
Jeds G.O.T. city was built using a lot of foam PVC. Pictures 128-135 (VERY pic heavy!):
http://ilovewargameing.21.forumer.com/viewtopic.php?t=2756
-
This is so cool :-*
-
Jeds G.O.T. city was built using a lot of foam PVC. Pictures 128-135 (VERY pic heavy!):
http://ilovewargameing.21.forumer.com/viewtopic.php?t=2756
So this stuff?
http://www.antenocitisworkshop.com/3mm-white-foamed-pvc.html
-
I used to work in a sign store, and we used the PVC board almost exclusively. While it is stronger and more warp resistant than foamboard or styrene sheet, it is more expensive, and harder to get a hold of. Its strength also makes is harder to cut. We used Stanley knives to cut it. I would not want to cut buildings with lots of windows out of it. You also have to watch the corners and edges, as you can chip them. We had to remake several signs for that reason. It would make an excellent base for making buildings that were going to have lots of detail added to them (Window frames glued to the PVC, using the PVC as the wall and window glass.)
-
So this stuff? http://www.antenocitisworkshop.com/3mm-white-foamed-pvc.html
Yes, thats it. I bought a few test pieces from Jed and then the 1mm and 2mm as I didnt need large quatities of them. I've still got loads of 5mm and 3mm, but the 8'x4' sheets are comparatively cheaper than buying smaller sheets.
As dbsubashi said cutting windows into 5mm would be a bit labourious. 3mm wouldnt be so bad and is proably all you would need for most buildings. My external walls are 5mm (a touch of over-engineering on my part) but with few holes needing to be cut in it.
The small factory from my Geezers game is made from 3mm. All the doors and brickwork are scribed into the foam PVC which is a big advantage of the material (if you are so inclined...)
(http://img.photobucket.com/albums/v480/overlord_awc/Geezers/Finished/Factory11.jpg)
(http://img.photobucket.com/albums/v480/overlord_awc/Geezers/Finished/Factory15.jpg)
-
Stairs:
The floating staircase is prevalent in villainous lairs so was an obvious, iconic thing to include. Rather than being truly to scale I wanted a set of steps that could have miniatures placed on them. Foam PVC (sorry to keep banging on about it!) was an easy solution to the relative weakness of the design, being just a central riser with multiple steps. I used 5mm for the riser and 3mm for the steps.
I decided on a 5mm gap between each step. First marking out the riser with the step positions 8mm apart (vertical). The depth varied with each set of steps, depending on how steep I required them. For this set it was 10mm (horizontal). Each step was 40mm wide and 20mm deep. The 5mm gap gives ample room to fit a figure base but means I could use 5mm foamcore spacers. Foamcore was used as if I did mange to superglue it to the staircase it would be easier to remove than foam PVC spacers.
(http://img.photobucket.com/albums/v480/overlord_awc/KKBB/WIP/Stairs06.jpg) (http://img.photobucket.com/albums/v480/overlord_awc/KKBB/WIP/Stairs04.jpg)
I used a piece of MDF to keep the alignment of the steps true as I superglued each one in place. Once I had figured out the construction it proved straightforward to adapt the design to fit specific sizes for different parts of the table.
(http://img.photobucket.com/albums/v480/overlord_awc/KKBB/WIP/Stairs05.jpg) (http://img.photobucket.com/albums/v480/overlord_awc/KKBB/WIP/Stairs07.jpg)
Once built they are just about stable enough to stand freely, although mine will be secured to other parts of the scenery. The top step on this one is slightly different to fit the intended location. As you can see a miniature base fits easily into the gaps.
(http://img.photobucket.com/albums/v480/overlord_awc/KKBB/WIP/Stairs08.jpg) (http://img.photobucket.com/albums/v480/overlord_awc/KKBB/WIP/Stairs09.jpg)
Take a giant step for mankind...
-
Lovely stuff :)
-
top job
8)
-
Walkways:
You have to have walkways. How else is the average goon expected to fall from a great height into the chemical tank/machinery/shark pool/etc?
Pretty straight-forward to build, using MDF, embossed plastic card and wire mesh. The only difficulty is getting the mesh to bend evenly, which I did with a steel ruler and my desktop. I could have used seperate railings for each side and drilled a series of holes in the MDF to fit them, but keeping the mesh as one pice was less time-consuming and a bit stronger.
(http://img.photobucket.com/albums/v480/overlord_awc/KKBB/WIP/Walkways03.jpg)
I also needed a tower to support the middle of two walkways. I used 2 Blastwall pieces and mounted them back to back on a piece of MDF then added a floorpiece on top.
(http://img.photobucket.com/albums/v480/overlord_awc/KKBB/WIP/Walkways08.jpg) (http://img.photobucket.com/albums/v480/overlord_awc/KKBB/WIP/Walkways06.jpg)
I added embossed plastic card to the sides and a hex-platformer ladder to one side and built an access door for the other.
(http://img.photobucket.com/albums/v480/overlord_awc/KKBB/WIP/Walkways04.jpg) (http://img.photobucket.com/albums/v480/overlord_awc/KKBB/WIP/Walkways05.jpg)
This was enough to raise the Old Crow tower I already had to the required height. Tower & walkways.
(http://img.photobucket.com/albums/v480/overlord_awc/KKBB/WIP/Walkways07.jpg) (http://img.photobucket.com/albums/v480/overlord_awc/KKBB/WIP/Walkways02.jpg)
Looks like he came to a dead end.....
-
More wow - I thought the stairs were great but the walkway and supports are even better! 8)
-
Sweeeeet :)
-
love the shark tank and the railings - have gone for something similar in my Aliens colony (the railings, not the shark tank), but went with the drilled railings - like you say, time consuming....
:D
-
Slowly Spinning Fans
What is this thing? I mean, it serves no useful purpose for there to be a bunch of chompy, spinny things in the middle of a hallway. No, I mean we shouldn't have to do this, it makes no logical sense, why is it here?
A couple of PC fans I kept when dismantling a broken computer years ago...... I knew I would need them for something.
MDF base with foam PVC top and sides. Wire mesh railings and a bit of embossed plastic card to tidy them up a little.
(http://img.photobucket.com/albums/v480/overlord_awc/KKBB/WIP/Fans01.jpg)
(http://img.photobucket.com/albums/v480/overlord_awc/KKBB/WIP/Fans02.jpg)
(http://img.photobucket.com/albums/v480/overlord_awc/KKBB/WIP/Fans03.jpg)
Built these on a whim as they are not in the design for the Salute game. They will get used at some point anyway!
Looks like he came to a dead end.....
-
Thanks for posting your work...really inspirational stuff! :-*
-
Ahh computer fans... No future wars game can be one without at least one kicking about!
You've made good use of them as well. They look like they'd be great for Necromunda!
-
Fantastic build so far Paul,
A quick question for you, do the fans turn?
Ahh computer fans... No future wars game can be one without at least one kicking about!
You've made good use of them as well. They look like they'd be great for Necromunda!
Exactly!
Cheers
Andy
-
Brilliant!!
-
A quick question for you, do the fans turn?
Yes, although currently only if you spin them with your finger. In theory you could wire them up, but they would spin a bit too fast. (Yes I know I could wire in a variable resistor...)
-
(Yes I know I could wire in a variable resistor...)
The, Words, Mouth, out, take... rearrange ;).
What about just a standard resistor? A variable might take up too much space what with the battery, miniatures and invisible flying bullets!?! Go on, you know you want to... lol
Cheers
Andy
-
Yes, although currently only if you spin them with your finger. In theory you could wire them up, but they would spin a bit too fast. (Yes I know I could wire in a variable resistor...)
Cease with your electrickery - it has no place here!
-
Cease with your electrickery - it has no place here!
VOODOO!!!! ;D
-
The Device:
Mysterious energy waves are interfering with U.S. missile launches.
Satellite toppler, Thermonuclear bomb, Doomsday device, computer core? Could be any of them. Failing that just something to hide behind as the bad guys shoot at you.
More distracted messing about with odds & ends. This time based on an old processor chip with attached fan and a chunky pen top from a Mrs Overlord Christmas cracker ("You dont need than pen for anything do you?" "Why, what are you going to build with it?" "I have plans .....Muahahahaha!").
(http://img.photobucket.com/albums/v480/overlord_awc/KKBB/WIP/Device01.jpg) (http://img.photobucket.com/albums/v480/overlord_awc/KKBB/WIP/Device03.jpg)
Minor update only as I'm back at work now. :-I
-
An evil genius to be sure :)
-
now if you wired up the fan is was sitting on, and put some tin foil in it, you could play Crystal Maze....
;)
-
Another brilliant project by scratchbuilding maestro Overlord, and another thread I nearly missed ...
:-*
-
I almost completely missed this! Fantastic idea, brilliantly executed. The shark is pure genius. :-*
-
There are always one or more extra awesome topic around on LAF, and today good sir, its yours.
-
Helipad:
My take on the original.
(http://filmjournal.net/mike/files/2009/04/yolt3.jpg) (http://img.photobucket.com/albums/v480/overlord_awc/KKBB/WIP/Helipad05.jpg)
MDF base and pad, with blue foam supports covered in filler to give it a bit of protection. Stairs built exactly as before.
(http://img.photobucket.com/albums/v480/overlord_awc/KKBB/WIP/Helipad06.jpg)
Helipad with a 'copter I picked up from Toy'R'Us a few years ago
(http://img.photobucket.com/albums/v480/overlord_awc/KKBB/WIP/Helipad07.jpg)
(http://img.photobucket.com/albums/v480/overlord_awc/KKBB/WIP/Helipad08.jpg)
Thanks for the continued feedback chaps. :)
now if you wired up the fan is was sitting on, and put some tin foil in it, you could play Crystal Maze.... ;)
(http://www.ukgameshows.com/p/images/f/ff/Crystal_maze_off1.jpg) No Riff-Raff in my games.... :D
-
It's looking wonderful Paul, but boy are you going to have a lot of painting to do! ;)
-
It's looking wonderful Paul, but boy are you going to have a lot of painting to do! ;)
I was just thinking the very same thing! lol
Great stuff Paul!
-
Yes, I suspect I will be painting it all right up until Salute. A few items to finish off building aswell. :)
-
Looking great,
I'm sure that a terrain wizard like yourself will have it finished in time ;D.
Do you already have miniatures painted for it?
Cheers
Andy
-
Wow, it's looking great!
I really like the landing pad, very inventive and I think you have used just the right amount of inspiration from the photograph, whilst still making it 'playable'.
-
Do you already have miniatures painted for it?
A few, but the Salute game will be using Crooked Dice/Uti Long Smile miniatures. I have a load of KKBB miniatures which will likely get painted post Salute for my own games.
-
Hercules Class Rocket of the Albion Rocket Consortium:
Hawaii to Jupiter 16. Repeat: Hawaii to Jupiter 16. There is an unidentified object on our screen, closing fast.
Pigs in spaaaaaace! Oops, wrong tag line. :D
The basis for my rocket, helpfully suggested by Jeroas recently (£1.50 each from Tesco post-Christmas)
(http://img.photobucket.com/albums/v480/overlord_awc/KKBB/WIP/Rocket01.jpg)
After dis-assembling the rocket, removing the sweets and the mechanism I extended the body of the rocket with plastic card. The gaps left by the removed mechanism were filled or covered up. The engine nozzle came from a toy (Acquired ages ago from a car boot sale) glued to a 60mm base.
(http://img.photobucket.com/albums/v480/overlord_awc/KKBB/WIP/Rocket02.jpg)
After putting it all back together (After C-130 Hercules-like cut and shunt, hence the name). I just need to fill the 4 screw holes before painting. I may also add an entry hatch on one side to marry up with the Launch Gantry (Under construction)
(http://img.photobucket.com/albums/v480/overlord_awc/KKBB/WIP/Rocket03.jpg)
It stands 13.5 inches (34cm) high and is rather short & fat compared to real rockets, but conveys the idea well enough. The clear windows should be far less evident once it is painted.
Slow progress currently, after the festive break productivity. ::)
-
It is not kind to steal the toys of your nieces and nephews this way, Paul...
-
Can players steal it during the game and fly to the space station you are building as well :D
-
Great stuff Paul. I've got two of those rockets and they've got potential. I just have to keep them away from my daughters sticky fingers (yes I did give her the sweets.......... most of them ::)).
-
Loving your work Mr Smith! Salute scenario now written and forces being painted!
-
Blofeld here ;)
Can we have a group shot of the whole build so far to get an idea of how the table will look?
Getting very excited by the prospect of seeing this at Salute and playing it later on :D
-
It is not kind to steal the toys of your nieces and nephews this way, Paul...
They are toys for me! I did give them the sweets from inside though. :)
Can players steal it during the game and fly to the space station you are building as well :D
"First there was the dream, now there is reality. Here in the untainted cradle of the heavens will be created a new super race, a race of perfect miniature specimens. You have been selected as its progenitors. Like gods, your castings will return to Earth and shape it in their image. You have all served in public capacties in my terrestrial empire. Your lead-tin alloy, like yourselves, will pay deference to the ultimate dynasty which I alone have created. From their first day on Earth they will be able to look up and know that there is law and order in the heavens."
Not yet!....... "Shurely shum mishtake". :D
Blofeld here ;)
Can we have a group shot of the whole build so far to get an idea of how the table will look?
You expect me to reveal all my plans in intricate detail at this stage so that I might be thwarted in my endeavours? >:D
Ah!......Fair point Blofeld......I will sort some pics out at the weekend.
-
Very cool!
-
Can we have a group shot of the whole build so far to get an idea of how the table will look?
(http://img.photobucket.com/albums/v480/overlord_awc/KKBB/WIP/Layout09.jpg)
(http://img.photobucket.com/albums/v480/overlord_awc/KKBB/WIP/Layout02.jpg)
(http://img.photobucket.com/albums/v480/overlord_awc/KKBB/WIP/Layout05.jpg)
(http://img.photobucket.com/albums/v480/overlord_awc/KKBB/WIP/Layout06.jpg)
(http://img.photobucket.com/albums/v480/overlord_awc/KKBB/WIP/Layout07.jpg)
(http://img.photobucket.com/albums/v480/overlord_awc/KKBB/WIP/Layout08.jpg)
(http://img.photobucket.com/albums/v480/overlord_awc/KKBB/WIP/Stairs02.jpg)
Will that do for now? ::)
Painting has started now, and is likely to be continuing for the for the next couple of months. The only major item to build, the Launch Tower, is nearing completion too.
I couldn't add a post to this thread today without mentioning the late John Barry, composer of many of the Bond themes (and many others). RIP.
As 'You Only Live Twice' is the main inspiration for this project:
http://www.youtube.com/watch?v=Rm9cC33kXMA
http://leadadventureforum.com/index.php?topic=25890.0
-
That is impressive - its been fun to watch the different part being built, but all together its, well bloody impressive!
Can't wait to see the painted full spread!
-
Wahey! Cracking stuff! :-*
-
Most impressive :-*
-
WOW!!!!!!!!!!!!!
Absolutely, mind blowing.
The see in lab window is highly clever.
The shark tank is ingenius.
The railing and piping deserves to be applauded.
The jail is fantastic.
The helicopter pad is brilliant.
This is the best project on this forum so far.
:o :o :o :o :o
-
The railing and piping deserves to be applauded.
I can't claim the raised pipework and supports. They are resin items from Old Crow: http://www.oldcrowmodels.co.uk/aipipefarm.htm
-
I am clapping my hands in a very excited manner. Coming together very nicely :)
-
Woo!
And, indeed, Hoo!
-
Looking great Paul :-* :-* :-*
Really starting to come together.
-
Well, that kinda raises the bar for awsomeness dosent it....
-
8)
-
I'm speechless. Inspiring.
-
A rather belated update after some unavoidable real-world issues.
CapCom to Jupiter 16. Can you confirm O2 pressure is within limit.
Roger. Everything looks good in the environmental control system
Launch Gantry:
Based upon part of a Matchbox Mega-Rig space playset I acquired some time ago at a car boot sale for £2 (along with other items and contained in a plastic storage box that still had the £1.99 pricetag on it - bargain!). I removed some of the interior workings and a battery pack, peeled off a load of old stickers, then gave the whole thing a good clean.
I forgot to take a photo of it before I started construction, but below is the gantry with a foam PVC/MDF box added in the initial stages:
(http://img.photobucket.com/albums/v480/overlord_awc/KKBB/WIP/Gantry03.jpg)
I wanted to build a liftshaft from the lower level up to the walkway that would lead to the spacecraft. The cage style shaft was made from a single piece of galvanised wire bent into a box shape. This proved rather difficult to do accurately, but I eventually acheived something that wasn't too lob-sided. Wooden dowelling was used to add some strength, which would locate in holes in the base section. On the right is the roof of the liftshaft with a winch housing built from the spares box (bits of a Star Wars Snowspeeder included):
(http://img.photobucket.com/albums/v480/overlord_awc/KKBB/WIP/Gantry04.jpg) (http://img.photobucket.com/albums/v480/overlord_awc/KKBB/WIP/Gantry06.jpg)
The upper walkway was built from MDF with galvanised wire railings. You can also see the copper wire I used to tie the open edges of the liftshaft together:
(http://img.photobucket.com/albums/v480/overlord_awc/KKBB/WIP/Gantry05.jpg)
The various items loosely fitted together:
(http://img.photobucket.com/albums/v480/overlord_awc/KKBB/WIP/Gantry02.jpg)
I built-up the underside of the walkway and added a moveable (during the game) section to dock with the spacecraft:
(http://img.photobucket.com/albums/v480/overlord_awc/KKBB/WIP/Gantry08.jpg) (http://img.photobucket.com/albums/v480/overlord_awc/KKBB/WIP/Gantry10.jpg)
Some additional superstructure for the liftshaft:
(http://img.photobucket.com/albums/v480/overlord_awc/KKBB/WIP/Gantry13.jpg)(http://img.photobucket.com/albums/v480/overlord_awc/KKBB/WIP/Gantry14.jpg)
(http://img.photobucket.com/albums/v480/overlord_awc/KKBB/WIP/Gantry12.jpg)
The Lower level with additions from the bits box:
(http://img.photobucket.com/albums/v480/overlord_awc/KKBB/WIP/Gantry15.jpg)(http://img.photobucket.com/albums/v480/overlord_awc/KKBB/WIP/Gantry17.jpg)
The Launch Gantry joins up with the elevated walkways:
(http://img.photobucket.com/albums/v480/overlord_awc/KKBB/WIP/Gantry22.jpg)
The completed Gantry, with and without Rocket:
(http://img.photobucket.com/albums/v480/overlord_awc/KKBB/WIP/Gantry07.jpg)
(http://img.photobucket.com/albums/v480/overlord_awc/KKBB/WIP/Gantry18.jpg)
I may add a little more detailing if time permits. Painting everything in time for Salute is the challenge now... ::)
"You made a mistake, my friend. No astronaut would enter the capsule carrying his air conditioner".
-
Great work once again!
As for painting - I don't envy you that task! But I'msure the finish will do you proud!
IMHO think the orange looks quite striking and you may want to think about leaving it that colour!
-
Cracking work Paul! :-* As the good Colonel said I dont envy you painting this lot!
Note to self: start going to car bootys.
-
More wonderful and inventive additions to the project. Roll on Salute ;D
-
Just caught up on this and WOW! It is amazing! Great project, I hope I get to Salute to see it!
-
Utter genius! :o
-
Great stuff, Paul!
I really look forward to more pictures :)
-
I'd completely missed this & it's brilliant :D :-* :D :-* :D :-*
-
Wow... :o
As far as additionnal detailing goes, a few hoses (which don't require paint!) could add something to this already incredible setting. Can't wait to see it painted!
Yours truly,
Sir Dryden
-
:o Totaly AMAZING!!!!! :o
I am going to Salute for the sole purpose of picking up the 7TV rulebook (other stuff may accidently fall into my eager grubby hands and exceed my budget as well) and can't wait to see this
:-* I'm in love with a gaming board and I'm not ashamed to admit it! :-*
-
Thaks for the continued support chaps. :)
A minor update on the build. A couple of photos of the painted Helipad:
(http://img.photobucket.com/albums/v480/overlord_awc/KKBB/WIP/Helipad09.jpg)
(http://img.photobucket.com/albums/v480/overlord_awc/KKBB/WIP/Helipad10.jpg)
(Finding that silver is a pain to photograph)
Lots more painted, but very little time to play around with taking photos currently.
How many weeks until Salute? ;)
-
Do you expect me to talk?
No, Mr. Bond. I expect you to die.
Where would any self-respecting Evil Villain be without the means to dispatch his arch-advesary?
(http://img.photobucket.com/albums/v480/overlord_awc/KKBB/WIP/Lasertable05.jpg)
The table and frame are of foam PVC and plastic card. The laser is various diameters of plastic and copper tubing with brass rod for the laser beam. Copper wire is wound around the narrower tubing.
(http://img.photobucket.com/albums/v480/overlord_awc/KKBB/WIP/Lasertable06.jpg)(http://img.photobucket.com/albums/v480/overlord_awc/KKBB/WIP/Lasertable07.jpg)
The finished item. Ready to cut large slabs of gold down to a more manageable size. Works on secret agents too!
Besides, there's always so much going on around Mr. Goldfinger. It would be a shame not to accept his hospitality.
Of course you need somewhere to detain your victim, giving him ample opportunity to prise off the air grille and make good his escape.
(http://img.photobucket.com/albums/v480/overlord_awc/KKBB/WIP/Cells07.jpg)
Foam PVC walls, MDF base with plastic card doors and grilles of brass mesh and plastic strip.
(http://img.photobucket.com/albums/v480/overlord_awc/KKBB/WIP/Cells06.jpg)
The completed module (apart from the free-standing control panel, currently being painted):
(http://img.photobucket.com/albums/v480/overlord_awc/KKBB/WIP/Cellblock02.jpg)
:)
-
Oh man - that laser drill is awesome!
-
Excellent stuff Paul :-* :-* :-*
-
The usual dose of genius :-*
-
The usual dose of genius :-*
Make that Evil Genius! >:D
My plans are nearing completion. Bwuhahahaha........
-
Fucking brill, Paul! The escape route via the airducts is just one of the thing which makes the whole thing zizzle. I wonder why they keep having those installed in their prison cells? Evil they may be but perhaps not so mastermind.
-
Fucking brill, Paul! The escape route via the airducts is just one of the thing which makes the whole thing zizzle. I wonder why they keep having those installed in their prison cells? Evil they may be but perhaps not so mastermind.
Evil or not, they have to keep to the building code, and that calls for a air duct for every prison cell at least crawling pace wide. These things are very important to stick to you know!
-
Evil or not, they have to keep to the building code, and that calls for a air duct for every prison cell at least crawling pace wide. These things are very important to stick to you know!
Where would an Evil Overlord TM be without somewhere to secure his captives prior to explaining his devious plans for world domination in detail. Of course it is specified in the secret lair planning regulations that there should be an adequate means of escape from an otherwise impregnable headquarters, hence the handy grills leading to the air duct system.
The Hadleys Hope project by Braz, put the idea in my head. It seemed such an obvious thing to do. Despite this, at the Salute playtest last Saturday, Karl's imprisoned Astronauts removed the grille in the first turn then spent nearly the whole game deciding what they should do. And they were rocket scientists! :? :D
-
Bio-Containment and Laboratory:
The painted Lab and equipment.
(http://img.photobucket.com/albums/v480/overlord_awc/KKBB/WIP/Lab08.jpg)
(http://img.photobucket.com/albums/v480/overlord_awc/KKBB/WIP/Lab09.jpg)
(http://img.photobucket.com/albums/v480/overlord_awc/KKBB/WIP/Lab10.jpg)
(http://img.photobucket.com/albums/v480/overlord_awc/KKBB/WIP/Lab11.jpg)
(http://img.photobucket.com/albums/v480/overlord_awc/KKBB/WIP/Lab15.jpg)
(http://img.photobucket.com/albums/v480/overlord_awc/KKBB/WIP/Lab17.jpg)
(http://img.photobucket.com/albums/v480/overlord_awc/KKBB/WIP/Lab18.jpg)
-
I hope you will come to the tactica next year with this stuff. Brilliant... Amazing... Wonderful... Superb...
-
Haven't you finished it yet?
Only six days to go now, better get your skates on ;)
Looking forward to seeing it (and you) on Saturday, I understand we are neighbours again. :D
-
Haven't you finished it yet?
Only six days to go now, better get your skates on ;)
Looking forward to seeing it (and you) on Saturday, I understand we are neighbours again. :D
Just finishing off the resin and a few odds'n'ends.
Rather fitting that Osato Oshiro Model Terrain should be next to a game based on 'You Only Live Twice'
Watch out for duelling helicopters and gyrocopters over your table. :D
How's that for Japanese efficiency? 8)
-
Looks good Paul. Looking forward to seeing it on Saturday :)
-
The lab looks great - nice touch, the way you've finished off the computer screens.
8)
-
Control Room:
A few bits still to come, but this is the majority of the Control Room resin pieces:
(http://img.photobucket.com/albums/v480/overlord_awc/KKBB/WIP/Control07.jpg)
(http://img.photobucket.com/albums/v480/overlord_awc/KKBB/WIP/Control10.jpg)(http://img.photobucket.com/albums/v480/overlord_awc/KKBB/WIP/Control09.jpg)
(http://img.photobucket.com/albums/v480/overlord_awc/KKBB/WIP/Control13JPG.jpg)
The lab looks great - nice touch, the way you've finished off the computer screens.
Inspiration from Dags, after I saw the ones he did for Uti Long Smile. His are a bit more subtle. Happy with mine though. :)
-
Control Room:
Last few resin items:
(http://img.photobucket.com/albums/v480/overlord_awc/KKBB/WIP/Control14JPG.jpg)
Generator Room:
Shocking! Positively shocking!
(http://img.photobucket.com/albums/v480/overlord_awc/KKBB/WIP/Generator01.jpg)
(http://img.photobucket.com/albums/v480/overlord_awc/KKBB/WIP/Generator02.jpg)
That just about completes all the Copplestone resin bits. :)
-
That colour scheme is perfect!
-
You are a painting machine. Loving it. Can't wait till Saturday!
-
Thats a serious amount of resin. Painting is great as well. As Thunderchicken says perfect colours.
I am extremely jealous of all the lucky people who are going to get to see this in the flesh and maybe play on it.
Why can't salute be further north :'(
-
What a gorgeous table. Gaming on that would be fantastic. I think your table at Salute will attract quite the crowd of onlookers. :)
-
I haen't been this excited about a build since the Zeppelin leviathan from GamerMac. I'm a huge Bond fan and this hits the sweet spot.
-
I salute you sir!
-
Top marks to Overlord, Uti, and all concerned.
It was even better live.
8)
-
Here are some pics of the finished table in play courtesy of Anevilgiraffe.
We were lucky enough to win the Best Participation Game (2nd year in a row!) for the 7TV game, which is in no small part due to Overlord's fantastic work.
A brilliant day for us all round, but soooo tired today :)
(http://homepage.ntlworld.com/roweller/frothershowcase/salute2011/othergames/IMG_1572.JPG)
(http://homepage.ntlworld.com/roweller/frothershowcase/salute2011/othergames/IMG_1573.JPG)
(http://homepage.ntlworld.com/roweller/frothershowcase/salute2011/othergames/IMG_1574.JPG)
(http://homepage.ntlworld.com/roweller/frothershowcase/salute2011/othergames/IMG_1575.JPG)
(http://homepage.ntlworld.com/roweller/frothershowcase/salute2011/othergames/IMG_1576.JPG)
(http://homepage.ntlworld.com/roweller/frothershowcase/salute2011/othergames/IMG_1626.JPG)
(http://homepage.ntlworld.com/roweller/frothershowcase/salute2011/othergames/IMG_1627.JPG)
-
It was a great table mate, but I think you've missed out an equally agreeable vision...
Great to meet you, would have liked to chat more but happy to see you too busy. I weakened and came back for some not femme bots.
-
(http://4.bp.blogspot.com/-nvhCYr88d6Y/TatTinZAMaI/AAAAAAAABKE/Sq-LOj6Ao9I/s1600/P1050524.JPG)
(http://2.bp.blogspot.com/-woapgMY-7t0/TatTjBZM4YI/AAAAAAAABKM/JW9-RghzWOg/s1600/P1050525.JPG)
A
M
A
Z
I
N
G
!
:o
:o
:o
-
Karl, you know you`r gonna have to go and score a hatrick now aren`t yah :D
-
It was a great table mate, but I think you've missed out an equally agreeable vision...
Great to meet you, would have liked to chat more but happy to see you too busy. I weakened and came back for some not femme bots.
Sorry I didn't get a chance to chat - very busy :)
What have I missed out? A bit punch drunk...
-
Don't apologise, I like to see worthy folk making money especially Kentish folk.
Hmmmm standing too close to the goalposts to notice eh? http://leadadventureforum.com/index.php?topic=28432.0
-
A couple more pics:
(http://i274.photobucket.com/albums/jj278/pez47/Crooked%20Dice/Salute%202011/P1050986.jpg)
(http://i274.photobucket.com/albums/jj278/pez47/Crooked%20Dice/Salute%202011/P1050988.jpg)
(http://i274.photobucket.com/albums/jj278/pez47/Crooked%20Dice/Salute%202011/P1050989.jpg)
(http://i274.photobucket.com/albums/jj278/pez47/Crooked%20Dice/Salute%202011/P1050990.jpg)
-
Orgasmic. That is the best game board I've ever seen.
-
Stunning. And, best of all, there for the public to play on, not just to gawk at.
-
I hope it can travel north this summer !
-
And a couple more from the Warlords:
(http://i274.photobucket.com/albums/jj278/pez47/Crooked%20Dice/Salute%202011/Screenshot2011-04-20at211559.png)
(http://i274.photobucket.com/albums/jj278/pez47/Crooked%20Dice/Salute%202011/Screenshot2011-04-20at211615.png)
-
Even more photos, this time from my phone (Apologies for the quality).
(http://img.photobucket.com/albums/v480/overlord_awc/KKBB/Salute2011/IMG00182-20110416-1512.jpg)
(http://img.photobucket.com/albums/v480/overlord_awc/KKBB/Salute2011/IMG00184-20110416-1517.jpg)
(http://img.photobucket.com/albums/v480/overlord_awc/KKBB/Salute2011/IMG00177-20110416-0931.jpg)
(http://img.photobucket.com/albums/v480/overlord_awc/KKBB/Salute2011/IMG00178-20110416-0932.jpg)
Villains Lounge, including a model of the whole lair (as suggested by Captain Blood 8))
(http://img.photobucket.com/albums/v480/overlord_awc/KKBB/Salute2011/IMG00185-20110416-1559.jpg)
-
Villains Lounge, including a model of the whole lair (as suggested by Captain Blood 8))
So does the model model of the Villains Lounge included, in turn a model model model? How many layers of recursion are we talking, here? ;)
The whole thing is awesome, I want to start building a pulp-era equivalent now!
-
Stunning stuff :-* :-* :-*
Love the model within the model idea.
Its the little touches like that, that turn a very good table into a work of art.
Hopefully one day I could get the chance to see this in the flesh.
-
Hopefully one day I could get the chance to see this in the flesh.
BLAM!
;) ;D
-
Hopefully one day I could get the chance to see this in the flesh.
BLAM!
;) ;D
I'll be expecting you....... >:D
-
I can't believe I almost missed this wonderful thread!
In a word: AWESOME!!! :o
Can we please have some insights on the storyline of the game?
-
Can we please have some insights on the storyline of the game?
I think someone may have made a film of it :~}
-
I think someone may have made a film of it :~}
Ha! :)
-
I can't believe I almost missed this wonderful thread!
In a word: AWESOME!!! :o
Can we please have some insights on the storyline of the game?
Glad you like it. :)
The layout and scenario is very loosely based on the Bond film 'You Only Live Twice'.
The Villains are in two groups:
Daedalus Pleasance, his faithful sidekick Oni and security guards attempt to thwart the Heroes as their computer technicians try to speed the rocket launch. Dr Mao and his femdroids assist in preventing the security breach, as technicians move to load the nerve gas payload onto the rocket.
The Heroic forces of Department X are also split between 2 players:
Dr Hugo Soloman, Pandora King and 3 frogmen have been previously captured and thrown into the cells with the astronauts from the captured rocket. They must escape and prevent the rocket launch. General Gordon, Big Tam and a squad of Extraordinary Agents arrive by gyrocopter and abseil rope into the volcano lair tasked with stopping the rocket countdown and preventing the deadly cargo reaching the rocket.
Crooked Dice should be releasing the scenario as a free 7TV download in the near future: www.crooked-dice.co.uk/
This post will self-destruct in 5 seconds. 5........4........3......
-
THANK YOU VERY MUCH!!! ;)
-
That table kicks arse! It's so sixties! Fab man. Love James Bond. You sirs are genuii.
-
Crooked Dice should be releasing the scenario as a free 7TV download in the near future: www.crooked-dice.co.uk/
GREAT! As soon it's available online, I will also buy the 7TV rulebook! :)
-
Sorry - You Only Live Dice is a bit delayed as we put the final touches on the Summer Special, but I will try and get back on it as soon as!
-
Wow, I'm a little late to the show but that is an amazing table! :)