Lead Adventure Forum

Miniatures Adventure => Future Wars => Topic started by: Faust23 on 28 October 2011, 06:30:33 PM

Title: Pig Iron helmets on Infinity bodies
Post by: Faust23 on 28 October 2011, 06:30:33 PM
Does anyone have any idea whether the scale of Pig Iron's trooper helmets will look proportionately ok on Infinity infantry bodies?

Title: Re: Pig Iron helmets on Infinity bodies
Post by: dwartist on 28 October 2011, 06:33:30 PM
too big I think....
Title: Re: Pig Iron helmets on Infinity bodies
Post by: Commander Vyper on 28 October 2011, 07:18:33 PM
Depends Dave,

System trooper yes too heavy, Heavy trooper closed and visored possibly not.

If you want a couple of each to try Faust let me know.
Title: Re: Pig Iron helmets on Infinity bodies
Post by: Faust23 on 29 October 2011, 04:16:27 AM
Thanks Commander.  I was looking at some of the Infinity & GOT minis and thought I might be able to get away with some PI head swaps to make Traveller figs for my latest obsession.  I will probably order some PI heads anyway along with some heavy infantry.  But thanks for the offer!  Awfully kind of you.  :D
Title: Re: Pig Iron helmets on Infinity bodies
Post by: Commander Vyper on 29 October 2011, 03:20:10 PM
No skin of my nose mate I have plenty and if you like them then just order what you need from Si and Lisa.

Pm me if you change your mind.
Title: Re: Pig Iron helmets on Infinity bodies
Post by: Faust23 on 14 November 2011, 01:11:31 AM
And epic fail with Infinity bodies fitting ANY non-Infinity heads!!!  Gaddammit.  I picked up a Prowler from the Nomads range hoping to put a Micro Arts Studios resin Commando head on it for NO Joy.....

In fact, I don't think Corvus Belli should advertise their range as anything but 25mm.  They're waaaay too small in proportionate scale to be called 28mm.  While they will look proper next to my converted traveller marines in battledress, they are just friggin tiny.
Title: Re: Pig Iron helmets on Infinity bodies
Post by: chromedog on 14 November 2011, 06:08:02 AM
I've found ONE head from another manufacturer that fit onto a PanO fusilier (miscast head - rather than wait for a replacement (which would just come with the same head, anyway, and I'm not fond of that head), I snipped it off and subbed a hooded WHFB WE head (it actually is the same scale head).

Haven't found ANY of the PIP heads to fit them though.  Not LI anyway.  Maybe better luck with MI or HI and PIP heads.
Title: Re: Pig Iron helmets on Infinity bodies
Post by: Faust23 on 14 November 2011, 07:08:00 AM
I've found ONE head from another manufacturer that fit onto a PanO fusilier (miscast head - rather than wait for a replacement (which would just come with the same head, anyway, and I'm not fond of that head), I snipped it off and subbed a hooded WHFB WE head (it actually is the same scale head).

Haven't found ANY of the PIP heads to fit them though.  Not LI anyway.  Maybe better luck with MI or HI and PIP heads.

Help me out with the abbreviations. What's MI and HI?  And PIP?  Pig Iron Productions? 

Title: Re: Pig Iron helmets on Infinity bodies
Post by: Lowtardog on 14 November 2011, 10:03:41 AM
Help me out with the abbreviations. What's MI and HI?  And PIP?  Pig Iron Productions? 



Light and Heavy infantry I think
Title: Re: Pig Iron helmets on Infinity bodies
Post by: Faust23 on 14 November 2011, 10:34:28 AM
Ah. Thanks
Title: Re: Pig Iron helmets on Infinity bodies
Post by: chromedog on 15 November 2011, 10:24:00 PM
Yes, PIP is Pig Iron Productions.
LI is L(ight) I(nfantry), HI is naturally enough, HEAVY infantry (and MI the middle ground of Medium infantry).

These helmets MIGHT fit on the HI Infinity figures.
(http://www.pig-iron-productions.com/bmz_cache/e/e639cd45f559a27e4404cbc580689a75.image.733x550.jpg)
(http://www.pig-iron-productions.com/bmz_cache/f/fd95a9b3872e96b47899114abb9b6f7f.image.733x550.jpg)

I've only seen them on GW scout bodies and guardsmen, though (the local Infinity crew are even more uptight about conversions than the local Warmachine mob).
Title: Re: Pig Iron helmets on Infinity bodies
Post by: Hrothgar on 16 November 2011, 02:12:00 PM
I've used the PI heads on everything from Cadian Imperial Guardsmen to Warzone plastics to Star Wars CMG conversions to Mongoose plastic SST infantry conversions. They are fan-flipping-tastic for conversion work and (much like some people contend about bacon) only seem to work magical improvement when put to use. Good stuff!!
Title: Re: Pig Iron helmets on Infinity bodies
Post by: Faust23 on 18 November 2011, 02:20:00 AM
Yeah, the PIP heads are great, but the Infinity figs are so friggin small in proportional scale that even heads from other minis in their range don't size right.

It's a pain in my ass.
Title: Re: Pig Iron helmets on Infinity bodies
Post by: Hrothgar on 18 November 2011, 02:32:28 AM
Here's a nuts idea-what about removing the heads from some GZG true 25mm figs? Some, like the New Israelis and the NSU are well proportioned and might look right with Infinity stuff.
Title: Re: Pig Iron helmets on Infinity bodies
Post by: Faust23 on 18 November 2011, 05:44:28 AM
Now THAT's a good idea Hrothgar! I was thinking about sizing Hasslefree & Heresy figs because they are more akin to what I've got from Infinity.  GZG wasn't on my radar. Thanks!
Title: Re: Pig Iron helmets on Infinity bodies
Post by: chromedog on 18 November 2011, 08:10:39 AM
Here's a nuts idea-what about removing the heads from some GZG true 25mm figs? Some, like the New Israelis and the NSU are well proportioned and might look right with Infinity stuff.

I can second this.  I've done a helmet swap from some New Anglians to my PanO and they don't look out of place.