Lead Adventure Forum

Other Stuff => Workbench => Topic started by: Thunderchicken on 10 December 2011, 11:07:38 AM

Title: Old lift (elevator) gates
Post by: Thunderchicken on 10 December 2011, 11:07:38 AM
Has anyone attempted building a set of these before or know where I can get hold of some?

(http://i1187.photobucket.com/albums/z395/Lord_Futtock/elevator.jpg)

Cheers.
Title: Re: Old lift (elevator) gates
Post by: Sangennaru on 10 December 2011, 11:26:16 AM
hum, you may make a custom etched-brass piece for it. Otherwhise it is quite hard to sculpt something like that =)
Title: Re: Old lift (elevator) gates
Post by: Verderer on 10 December 2011, 11:38:54 AM
Depends on the scale, but in 28mm why not just take a piece of mesh and brass rods and glue/solder them together? If there's a frame, a few styre strips should do it? Simple job, I should think?
Title: Re: Old lift (elevator) gates
Post by: Svennn on 10 December 2011, 11:41:36 AM
How big does it need to be?  ::)
Title: Re: Old lift (elevator) gates
Post by: Thunderchicken on 10 December 2011, 12:13:38 PM
Thanks chaps.

Svennn, I'm still working on that. I've ordered some of Ainsty's underground bits, once they arrive I can measure the dimensions of the corridor. The layout will be the same as the set for Quatermass and the Pit and the lift will be at the end of this tunnel:

(http://i1187.photobucket.com/albums/z395/Lord_Futtock/MiniaturenfotosOriginale380-H800.jpg)
Title: Re: Old lift (elevator) gates
Post by: AndrewBeasley on 10 December 2011, 03:28:58 PM
You may want to ask Andy if he can get some etched for you.

He has had some grave yard gates (http://ainstycastings.co.uk/product_info.php/products_id/652) done and may be able to help.

(While you are speaking to him - tell him to give up the big stuff and get into 15mm - he just does not listen to me)
Title: Re: Old lift (elevator) gates
Post by: Storm Wolf on 10 December 2011, 04:03:26 PM
Ahh "Hob`s Lane" or should that be "Hobb`s Lane" Underground station!

Funnily enough I only watched the DVD of Quatermass and the Pit last weekend, stonking good film. An oldie but a goodie.

Will whatch this thread with interest

Glen
Title: Re: Old lift (elevator) gates
Post by: Cory on 10 December 2011, 05:37:12 PM
Yes, I made a set from plastic cross stich canvas. Not the square ones but the diamond pattern.
Title: Re: Old lift (elevator) gates
Post by: snitcythedog on 11 December 2011, 02:37:42 AM
For the lattice at the back there is a etched brass product here in the US that would mimic pretty well.  Then all you would need to do is glue on the uprights.  I will see if I can find a manufacture for you.  I seem to remember that it was in a model train shop. 
Snitchy sends.
Title: Re: Old lift (elevator) gates
Post by: FramFramson on 11 December 2011, 05:10:42 AM
You folks keep going on about Quatermass and The Pit (in various threads). Do you mean the BBC serial or the movie? Being a miserable colonial, I have seen neither.
Title: Re: Old lift (elevator) gates
Post by: Steve F on 11 December 2011, 08:38:05 AM
You folks keep going on about Quatermass and The Pit (in various threads). Do you mean the BBC serial or the movie? Being a miserable colonial, I have seen neither.

The tube station is from the film version (distributed in the former colonies as Five Million Years to Earth).  In the TV serial, the capsule is found on a building site, but the film was made at the time that London Underground was building the Victoria Line extension, so tunnelling seemed more up-to-date.