Lead Adventure Forum
Miniatures Adventure => Medieval Adventures => Topic started by: Timbor on 08 August 2012, 04:17:01 AM
-
Hi folks, looking for some help to figure something out. I am looking to get some arthurian cavalry from the westwind 30% off sale:
http://www.westwindproductions.co.uk/catalog/product_info.php?products_id=1235
As you can see in the picture they have round shields. LBM only offers oval transfers for WestWind figures. In fact, I could only find round arthurian transfers in their GB line: http://www.littlebigmenstudios.com/catalog/index.php?cPath=1_26_29&osCsid=53c06a190967e1be717373a466b790a6
What is the likelihood that I could get the LBM round GB transfers to work on the WestWind figures?
-
I'd ask Steve directly Timbor
He's incredibly helpfull I think
I had some trouble finding a match for round shields for Arthurians a year or so ago but he came up trumps
-
Good idea... I asked and he needs the shield dimensions in mm. I don't know since I don't own the figures yet. Anyone else have some by chance and would be able to measure the shield dimensions? lol
-
GB transfers almost certainly won't be a good fit.
I have some at home, so can do a measurement for you after work. The key thing isn't just the shield diameter, it's the size of the shield boss, which, from memory are large on West Wind models. Also, some of their shields are flat, others very slightly 'dished'. The latter are not quite so good for transfers although they'll still work.
You could, of course, email West Wind and talk direct to them. They are generally very helpful folk...
-
I did email them, but have not yet heard back ;)
Hopefully I can sort it out. Otherwise I might just have to pick up some GB shields to use with them or search through my boxes to see if I can get something else to work. If you can get me some of those measurements though that would be great.
If they are close enough, I might be able to fudge it and make them fit, though it may end up being more trouble than its worth. :D
-
In my opinion, the GB transfers will not really fit West Wind shields as the West Wind bosses are too big - the hole in the middle of the transfer will not be big enough to go over the boss.
Anyway, the dimensions are as follows:
Design 1 (totally flat round shield): 13mm diameter. Shield boss 4mm diameter
Design 2 (flat shield but rounded eadges - not 'dished' as I said earlier): 14mm diameter (although a 13mm transfer would fit better as it'll not go onto the rounded part...you have to paint round the edges of LBM transfers anyway) with a 5mm diameter boss.
Hope that helps and good luck - as you say, an easy alternative would be to buy a bag of GB round shields and match the transfers to those, as LBM do transfers to fit all GB round Dark Age shields.
Andy