Lead Adventure Forum
Other Stuff => Workbench => Tutorials => Topic started by: Billchuck on 03 July 2015, 04:43:50 PM
-
I've been working on some 6mm terrain, and one thing I needed was a lot of woods. After poking around online I stole some ideas and came up with these:
(http://www.velociengineer.net/wp-content/uploads/2015/07/IMG_0795.jpg)
See how I made them here: http://www.velociengineer.net/?p=16 (http://www.velociengineer.net/?p=16)
-
They look nice, if a bit unpassable :)
-
Very effective
-
Blimey, it's like the Emmerdale opening sequence, in your own house!
Very nicely done. :) A better effect than a couple of straggly trees on a green patch, IMO - I might have to nick it for myself. Think it'd work with 10mm too, and you don't happen to have developed a technique for conifers, have you...? :D ;)
-
The best method I've found is https://douglasgking3002.wordpress.com/2011/02/27/into-the-woods/ . It didn't work so well for me, though.
-
Heh! I was only sort of kidding, 'cos I've had a hankering for dense conifer forests for my 10mm armies, and clump foliage on woodland scenic conifer trunks didn't work so great for me. Looked at cutting down bottle brushes but it would've been cheaper to get commercial trees. Chenille, though! Wonder if that's available over here?
Regardless, thank you sir! You're a gent. :)
-
The big problem I had was getting glue on them without the chenille fibers clumping up. I made a pile of rather two-dimensional conifers before I gave up on it. Maybe a spray adhesive would work better than dipping them in watered down white glue.
For 10mm I would get some of the giant chenille stems, cut them to length, then trim the fibers to get the cone shape. Or look for some cheap bottle brushes and trim them.
-
Does the part, looks the part, and is easy to make. get´s a A+ in my book ;)
-
The big problem I had was getting glue on them without the chenille fibers clumping up. I made a pile of rather two-dimensional conifers before I gave up on it. Maybe a spray adhesive would work better than dipping them in watered down white glue.
For 10mm I would get some of the giant chenille stems, cut them to length, then trim the fibers to get the cone shape. Or look for some cheap bottle brushes and trim them.
I can get chenille here in the UK, but the stems are more commonly (and familiarly) called 'pipe cleaners' :) I can't find any of the wavy 'bump' types above 15mm diameter, which seems a bit small even for 10mm; but I found giant examples of the straight types - half a metre and 25-30mm diameter! (It's like a whole new world of hobby supplies!) Should do very nicely if I follow your advice and trim segments into cones.
I was wondering about clumping myself, specifically brushing or even combing white glue in to make it mat together, like stuffed toy fur for thatched roofs. 'Style' it into slightly more defined 'branches' for the flock? Just a thought that I might try myself.
I haven't forgotten the broadleaf method either. Thanks again!