Lead Adventure Forum

Miniatures Adventure => The Conflicts that came in from the Cold => Topic started by: Stu on March 30, 2009, 08:20:34 PM

Title: Copplestone KKBB resin question
Post by: Stu on March 30, 2009, 08:20:34 PM

The pictures of the new resin from Salute has got me thinking evil thoughts but my plan for world domination one table top at a time has been put on hold until one final question has been answered- what are the dimensions of the various doors in the range? I'm assuming that there are only two basic sizes which should make lair design and construction easier.
 

Title: Re: Copplestone KKBB resin question
Post by: Overlord on March 30, 2009, 09:08:52 PM

Are you sitting comfortably....?
 
KKBB401 Power Room Door 
KKBB402 Security Door
KKBB403 Walk-In Freezer Door
KKBB404 Lift Doors
KKBB405 High-Security Cell Door
Width=50mm+/-0.5mm.  Height=45mm+/-0.5mm.   Depth=20mm+/-1mm

KKBB406 Steel Door
KKBB407 Cell Door
KKBB408 Storeroom Door
KKBB409 Hi-Tech Vault Door
KKBB410 Strongroom Door
KKBB411 Lab/Kitchen Door
Width=25mm+/-0.5mm.  Height=45mm+/-0.5mm.  Depth=20mm, up to -2mm

KKBB412 Outer Blast Door
KKBB413 Interior Blast Door
Width=50mm+/-0.5mm.  Height=45mm+/-0.5mm.   Depth=20mm+/-1mm

EQ1 Bank Vault Doors: Width=70mm  Height=50mm  Depth=20mm

EQ4 Bio-Hazard Doors: Width=50mm  Height=45mm  Depth=20mm

All measurements based on the copies I have. Widths & heights show very little variation.
The base depth is a nominal 20mm for all but does vary between 18mm & 21mm at the extremes.
I'm pleased with them and all the other bits I bought  :D
I have (evil) plans.......>:D

Title: Re: Copplestone KKBB resin question
Post by: Stu on March 30, 2009, 09:58:03 PM

Less than one hour and I get everything I need and more! Cheers for that Overlord!

Title: Re: Copplestone KKBB resin question
Post by: flooglestreet on March 31, 2009, 02:13:15 AM

Has anybody tried to set Copplestone resin doors into walls made from Hirst Arts blocks?