Lead Adventure Forum
Miniatures Adventure => Weird Wars => Topic started by: rabenga on June 23, 2018, 05:00:31 PM
-
Thoughts? Kinda riffin on the kv-5 thing...
(https://i.imgur.com/3h7zj0l.jpg)
C and C always welcome....
-
(https://i.imgur.com/WIfmcUd.jpg)
-
Interesting looking piece of kit.
What is the base model?
-
Interesting and very KV-5. I hope R2D2 will get suitable MG armament - twin DT-28s?
I assume you have more wheels! Oh and if it's not too late - turn the tracks around! The drive is at the rear :D
-
Base kit is a Dust SSU heavy tank that I have had sitting on the shelf for years...cool looking model, but to similar to an is-3 and just too darn big.... Soooo I decided to go with the big thing and make a kv-5 looking tank...turret is scratched outa styrene and I have a 1/48 hobby boss kv-1 for a donor kit. Unfortunately the front return roller and the rear drive sproket are identical on the dust kit, but I think the sprokets from the hobby boss kit will fit with a little fiddling. R2d2 will be armed with some dshk 12.8 hmgs or mabey a flame thrower. Main gun is going to be some kind of particle accelerator...anyone have any inspiring photos of Russian esque energy weapons they would like to share?
-
(https://i.imgur.com/0nFKHqg.jpg)
Shows the cardboard stage of the turret and the original hull a little more clearly...
-
(https://i.imgur.com/1YVgAZZ.jpg)
Currently working on the hull...think I have all the bits and bobs figured out for the turrets and hatches and all. I am stuck on what the main gun should look like so any help would be much appreciated!
-
DShKs - good call.
Use Tesla for inspiration? I reckon some big radiators either side of the turret to cool that mess down after firing perhaps? Some more power cable too?
As you've not done the back deck and you have the convenient turret cutout/step - how about a taller back deck to fit in the generators?
-
Raised back deck ala kv-5...check. giant heat sinks and radiators on the back of the turret.... Check ( I have some Gundam greeblies stashed away somewhere). Cables...hmmmm, I like the look of them, but I can't find a way to justify them on a combat vheicle...you'd think they would find a way to keep them from being exposed....
-
Good point on the cables.
Look forward to seeing the results!
-
Take a look at the deck plate of a tiger. Also the couplings on the crocodile.
You can always put cables in a U shaped armoured housing so you still see the cables but imply armouring.
When it comes to armour design engineering often ignores ergonomics (and common sense.) be it a fuse box you bang your head on with every bump, or the only exit in a fire being a door that's also a fuel tank.
Mark.
-
Cables...hmmmm, I like the look of them, but I can't find a way to justify them on a combat vheicle...you'd think they would find a way to keep them from being exposed....
One of the issues I have with the Clockwork Goblin Soviet Sound cannon.
-
Exactly.
-
(https://i.imgur.com/gdH6Ryz.jpg)
Got some work done on the hull.
-
(https://i.imgur.com/1spEPL2.jpg)
-
(https://i.imgur.com/6UuSrZH.jpg)
Mabey a bit much......
-
Possibly, but I like the concept. How about an elliptical 'projector' instead of round?
Bring it in closer to the turret and fair in the edges to make them less vulnerable?
(https://content.historicengland.org.uk/remote/shared.historicengland.org.uk/etl/1443087/6528bd8f-17ef-4fe4-81af-35061ed8f7d2.jpg?w=700&h=450&mode=crop&quality=60)
-
(https://i.imgur.com/6UuSrZH.jpg)
Mabey a bit much......
Perhaps.
-
(https://i.imgur.com/eb1pvsZ.jpg)
(https://i.imgur.com/J9xYPhz.jpg)
Progress!!!!
-
8)
Nice clean lines
What are the sides? PVC?
-
8)
Nice clean lines
Thanks ! Quite a compliment from a master builder Luke yourself
What are the sides? PVC?
Nope, just plasticard...I scribed in the slab after...
-
Even better :D Nice work!
-
Any opinions on where the exhaust should be located? I'm not even sure what sort of power plant we are talking about....either a really large diesel or some sort of reactor...jet turbine anyone?
-
(https://i.imgur.com/p406zND.jpg)
Here's a better pic of the engine deck, grey bits aren't attached yet, not sure they are going to live there....
-
I'd say down the sides. A big v12 diesel.
You have a large blank space on the sides of the raised rear deck which is asking for armoured covers for the exhausts.
Could even be some relatively thin thing like the centurion:
(https://s-media-cache-ak0.pinimg.com/originals/f7/af/1b/f7af1b174722b8596eee526289a83312.jpg)
I feel a reactor would be more obvious on the back deck:
(https://upload.wikimedia.org/wikipedia/en/e/e8/Ford_Nucleon.jpg)
For the back deck, how about something more asymmetrical, that rear vent has a cut out already
-
I was leaning towards exhaust out the side...was the exhaust on the t-55s armored somehow? Looks like it wasn't.... I do like the look of the armored exhausts on the t-34...may do something like that, but coming out the sides....thanks for the advice...
-
Turn the T-34 style armoured exhaust down the side and make it longer perhaps?
So it picks up all 6 exhausts from your V-12?
-
(https://i.imgur.com/5wM8feR.jpg)
Like so? Needs rivets and what not....
-
Very nice, looks like it'll be a beast :)
-
Making some good progress..running gear is sorted an installed (mostly), machine gun turret thingies are built...working on scratching the fenders ( any advice on bending sheet styrene is appreciated!!) building a LED light rig for the zapp gun and pondering what the hell I'm going to build said zapp gun out of...I will post some more pics if anyone is curious. Happy bastile day!
-
(https://i.imgur.com/kgHq1HJ.jpg)
:)
-
8) 8) 8)
-
:-*
-
Looking great :o
-
Nice.
-
Looks great! WOT has a lot to answer for
-
Looks great! WOT has a lot to answer for
Who is WOT?
-
World of tanks!
-
Oh...that silly game! Do they have a kv-5? My first encounter was with the midwar monsters for flames of war...
-
Oh...that silly game! Do they have a kv-5? My first encounter was with the midwar monsters for flames of war...
They do indeed. The poor radio operator is known for dying a lot. ::) lol
-
(https://i.imgur.com/GWRLxjA.jpg)
(https://i.imgur.com/sCPwsLI.jpg)
(https://i.imgur.com/HeSv2oX.jpg)
(https://i.imgur.com/dJEV1C8.jpg)
Now with unearthly glow! Need to do some final details and build the zapp gun and we are ready for paint! I may make a conventional gun for it as well...
-
Nice idea for the heat sink! :D
Good stuff! Now needs stowage!
-
Very nice.
-
Thanks y'all!
-
That’s a big one.
-
Sterling work sir.