Lead Adventure Forum

Other Stuff => General Wargames and Hobby Discussion => Topic started by: twrchtrwyth on March 30, 2020, 08:27:15 PM

Title: Help identifying some models.
Post by: twrchtrwyth on March 30, 2020, 08:27:15 PM: I recently bought a lot on ebay. There was some specific things I wanted and then there was all this other stuff. I don't know who produces it or what they are. Could you help?

1.
(https://i.imgur.com/zK5haNA.jpg)

2.
(https://i.imgur.com/tthpjE9.jpg)

3.
(https://i.imgur.com/H8EEuHs.jpg)

4.
(https://i.imgur.com/FTXJoP6.jpg)

5.
(https://i.imgur.com/ejAQ1ks.jpg)

6.
(https://i.imgur.com/slQnbJT.jpg)

7.
(https://i.imgur.com/ntQ6Aql.jpg)

8.
(https://i.imgur.com/rVXGRiD.jpg)

9.
(https://i.imgur.com/NyfFXUB.jpg)

10.
(https://i.imgur.com/uhFqcC7.jpg)

11.
(https://i.imgur.com/5oolQSF.jpg)

12.
(https://i.imgur.com/jR8xi7i.jpg)
Title: Re: Help identifying some models.
Post by: Ewan on March 30, 2020, 08:50:08 PM: No 7 looks like the hexes for Baatletech

http://www.ralparthaeurope.co.uk/shop/battletech-c-1/miniatures-c-1_3/accessories-c-1_3_68/20800-metal-hex-bases-4-p-1857.html

No 6 might also be Battletech
Title: Re: Help identifying some models.
Post by: voltan on March 30, 2020, 08:51:54 PM: 1: the bottom row are vehicle parts from old crow, mostly.

2: there's a couple of bits that could be from the old pig iron vehicles, the hatch in the middle, possibly the thing at top right.

That's my knowledge dried up. :D
Title: Re: Help identifying some models.
Post by: twrchtrwyth on March 30, 2020, 08:56:04 PM: Thanks both.

Voltan, could the long strips in 2 be for the side of a vehicle to fit the wheels on?
Title: Re: Help identifying some models.
Post by: voltan on March 30, 2020, 09:04:43 PM: Quote from: twrchtrwyth on March 30, 2020, 08:56:04 PM

Voltan, could the long strips in 2 be for the side of a vehicle to fit the wheels on?

Looks likely, but I don't recognise the parts so can't say for sure.

I only knew the others as I'd bought the kits years ago :P
Title: Re: Help identifying some models.
Post by: Dentatus on March 30, 2020, 09:13:24 PM: I think I see some GZG minis in there, Aerial drones in 8 and figs and a wheeled drone in 10.
Title: Re: Help identifying some models.
Post by: Nordic1980s on March 30, 2020, 09:36:31 PM: First image, top right: Macross Super Valkyrie part...?
Title: Re: Help identifying some models.
Post by: Calimero on March 30, 2020, 09:43:00 PM: Quote from: Dentatus on March 30, 2020, 09:13:24 PM
I think I see some GZG minis in there, Aerial drones in 8 and figs and a wheeled drone in 10.

IIRC the walking drone from pic 10 is also from GZG. THe half figure in pic 8 is also from GZG
Title: Re: Help identifying some models.
Post by: Karadek on March 31, 2020, 04:03:33 AM: Quote from: Nordic1980s on March 30, 2020, 09:36:31 PM
First image, top right: Macross Super Valkyrie part...?

Yes, it's a fastpack from a super Valkyrie. The rest, idk.
Title: Re: Help identifying some models.
Post by: Dodgy_Ed on March 31, 2020, 07:58:36 AM: The Dwarfs in 9 look like Iron Mask Miniatures:
http://ironmaskminiatures.blogspot.com/p/test-page.html
Title: Re: Help identifying some models.
Post by: Overrevdsquat on March 31, 2020, 01:53:24 PM: Pic 1 except the very top right are all old crow parts.

Pic 2 the top right and middle stepped trapezium hatch are both Pig iron I think.
Title: Re: Help identifying some models.
Post by: Rabbitz on March 31, 2020, 03:10:13 PM: 6 is definitely Battletech tanks from ironwood metals.
Title: Re: Help identifying some models.
Post by: Ultravanillasmurf on March 31, 2020, 06:52:54 PM: Quote from: Karadek on March 31, 2020, 04:03:33 AM
Yes, it's a fastpack from a super Valkyrie. The rest, idk.
Are you sure it is not from an Armoured Valkyrie?
Title: Re: Help identifying some models.
Post by: Pattus Magnus on March 31, 2020, 09:55:37 PM: The brass sprue in image 4 is the antenna array from the 6mm sci-fi naval vtol-carrier ship Old Crow used to produce.

The sprue has 2 parts: the larger piece in the image is the tower (the 2 ‘wings’ at the side fold in). The smaller piece is the top (the rectangle folds down to fit on the top of the tower, and holds the antenna array).

You could glue it to one of the resin buildings as a signal tower - might make a decent piece of scatter terrain with 6mm figs.
Title: Re: Help identifying some models.
Post by: twrchtrwyth on April 01, 2020, 01:20:25 AM: Thanks everyone.

Quote from: Pattus Magnus on March 31, 2020, 09:55:37 PM
The brass sprue in image 4 is the antenna array from the 6mm sci-fi naval vtol-carrier ship Old Crow used to produce.

The sprue has 2 parts: the larger piece in the image is the tower (the 2 ‘wings’ at the side fold in). The smaller piece is the top (the rectangle folds down to fit on the top of the tower, and holds the antenna array).

You could glue it to one of the resin buildings as a signal tower - might make a decent piece of scatter terrain with 6mm figs.

You wouldn't happen to have a picture would you?
Title: Re: Help identifying some models.
Post by: Pattus Magnus on April 01, 2020, 04:43:31 AM: I don’t have a pic handy, but I’m happy to take one tomorrow morning and post it (it’s 9:45 pm in my time zone).
Title: Re: Help identifying some models.
Post by: twrchtrwyth on April 01, 2020, 07:57:26 AM: Great, thanks.
Title: Re: Help identifying some models.
Post by: Pattus Magnus on April 01, 2020, 04:43:02 PM: Here are a couple of pics of the model, with the antenna array in place.

(http://)
Title: Re: Help identifying some models.
Post by: katie on April 01, 2020, 06:53:42 PM: #5 is, I think, "Road/Kill" miniatures from the 2017 kickstarter.

The long metal parts in #2 may also be from that range and it's possible some of the small gun turrets and things are too.

Three things at top left of #3 looks like the comms tower from that range and something else and a pop-up turret.

The car at the back of #10 is possibly one of the add-on minis.

All currently OOP I think after Mega Minis disappeared.
Title: Re: Help identifying some models.
Post by: twrchtrwyth on April 03, 2020, 05:41:37 PM: Quote from: Pattus Magnus on April 01, 2020, 04:43:02 PM
Here are a couple of pics of the model, with the antenna array in place.

Thanks.

Quote from: katie on April 01, 2020, 06:53:42 PM
#5 is, I think, "Road/Kill" miniatures from the 2017 kickstarter.

The long metal parts in #2 may also be from that range and it's possible some of the small gun turrets and things are too.

Three things at top left of #3 looks like the comms tower from that range and something else and a pop-up turret.

The car at the back of #10 is possibly one of the add-on minis.

All currently OOP I think after Mega Minis disappeared.

Nicely spotted.
Title: Re: Help identifying some models.
Post by: dadlamassu on April 03, 2020, 05:56:40 PM: Pic 11. These look like 30mm Minot Napoleonics. They were made of a particularly soft metal. I have a few somewhere.