Lead Adventure Forum
Other Stuff => Workbench => Topic started by: DavyJones on September 30, 2020, 03:14:20 PM
-
Hi guys,
recently I finished my first 3D printed model: the little cottage from the City of Tarok Kickstarter. I bought the settlers pledge, but the cottage itself is a free download.
(https://glueanddice.com/wp-content/uploads/2020/08/City-of-Tarok-Little-Cottage-10.jpeg)
(https://glueanddice.com/wp-content/uploads/2020/08/City-of-Tarok-Little-Cottage-5.jpeg)
(https://glueanddice.com/wp-content/uploads/2020/08/City-of-Tarok-Little-Cottage-15.jpeg)
(https://glueanddice.com/wp-content/uploads/2020/08/City-of-Tarok-Little-Cottage-9.jpeg)
(https://glueanddice.com/wp-content/uploads/2020/08/City-of-Tarok-Little-Cottage-8.jpeg)
I am very happy with the result. Now I have to start painting all the other stuff from the kickstarter. And that is a lot of stuff. o_o lol
More as always on the blog: https://glueanddice.com/city-of-tarok-little-cottage/ (https://glueanddice.com/city-of-tarok-little-cottage/)
-
Looks good! I'm glad to see that you included details on the interior, that is all too often neglected. I really like having playable interiors, for when the action moves indoors.
-
Good stuff. What are you printing it on and what layer height are you using?
-
@PhilB: I am also a big fan of playable interiors. :)
@Tadgie: I used a Prusa MK3s.
Screenshot with all the print settings: https://glueanddice.com/wp-content/uploads/2020/08/City-of-Tarok-Little-Cottage-12.png (https://glueanddice.com/wp-content/uploads/2020/08/City-of-Tarok-Little-Cottage-12.png)
Sorry, I am unable to include the screenshot directly here, because LAF shows the image way to small to be any good.
-
Thank you for sharing the settings.
35 hours to print but the end quality of finish is really good.
-
I guess with lower details it should be possible to reduce the print time below 20 hours. But I prefer higher details personally.