Lead Adventure Forum

Miniatures Adventure => The Second World War => Topic started by: TacticalPainter on March 13, 2022, 12:33:49 AM

Title: Tactical Painter's Second World War in 20mm (updated 20 04 24)
Post by: TacticalPainter on March 13, 2022, 12:33:49 AM
I thought it might be easier to follow in the footsteps of others and create a single thread for posting work on my 20mm Second World War collection. Anyone interested in seeing earlier work can find lots of stuff on the 20mm SWW page on the blog which is here http://thetacticalpainter.blogspot.com/p/miniatures-20mm.html

Latest additions are for my early war Germans and specifically with the 1940 Chain of Command campaign we are currently playing set in the Netherlands. I've had a few of these sitting on the shelf of shame for a while - they were made and primed and this campaign was the incentive to get them moving (also part of a NY resolution to finish off as many unfinished projects as I can before starting anything new).

The PzKpfwI are a mix of kits, with two from s-models and one the very old kit from Fujimi. The crew figure is from the Orion plastic Panzer WWII Soldiers set.

(https://imagizer.imageshack.com/v2/1024x768q90/924/9xbEYR.jpg) (https://imageshack.com/i/po9xbEYRj)

(https://imagizer.imageshack.com/v2/1024x768q90/924/0ZB9m9.jpg) (https://imageshack.com/i/po0ZB9m9j)

(https://imagizer.imageshack.com/v2/1024x768q90/923/bZMC9n.jpg) (https://imageshack.com/i/pnbZMC9nj)

The PzKpfwII is also from s-models and the crew figure is again from the same Orion set as the PzI.

(https://imagizer.imageshack.com/v2/1024x768q90/923/uiTwK7.jpg) (https://imageshack.com/i/pnuiTwK7j)

(https://imagizer.imageshack.com/v2/1024x768q90/922/NpQDLi.jpg) (https://imageshack.com/i/pmNpQDLij)

(https://imagizer.imageshack.com/v2/1024x768q90/923/EpinDM.jpg) (https://imageshack.com/i/pnEpinDMj)
Title: Re: Tactical Painter's Second World War in 20mm
Post by: Grumpy Gnome on March 13, 2022, 06:30:15 AM
Looking good mate!
Title: Re: Tactical Painter's Second World War in 20mm
Post by: Tom Dulski on March 14, 2022, 12:17:00 AM
yes, very cool.
Title: Re: Tactical Painter's Second World War in 20mm
Post by: Captain Darling on March 14, 2022, 12:58:23 AM
Nice work, great modelling, the S Model kits as you say are a nice balance between gaming and modelling, but for early 1940 (Case Yellow period) they should be in the two tone grey/brown camo scheme.
Title: Re: Tactical Painter's Second World War in 20mm
Post by: hayeswauford on March 14, 2022, 01:40:00 AM
Gorgeous work! I believe I follow you on Instagram (?) and always love your posts! Thank you for sharing!
Title: Re: Tactical Painter's Second World War in 20mm
Post by: TacticalPainter on March 14, 2022, 07:05:36 AM
Gorgeous work! I believe I follow you on Instagram (?) and always love your posts! Thank you for sharing!

Thanks! I’m not on Instagram but I am on Twitter (@PainterTactical).
Title: Re: Tactical Painter's Second World War in 20mm
Post by: Shahbahraz on March 14, 2022, 06:52:08 PM
Nice work, great modelling, the S Model kits as you say are a nice balance between gaming and modelling, but for early 1940 (Case Yellow period) they should be in the two tone grey/brown camo scheme.

Ignore him - everyone knows Panzers are grey. Until they are yellow.
Title: Re: Tactical Painter's Second World War in 20mm
Post by: TacticalPainter on March 16, 2022, 10:55:11 AM
I've had a collection of figures and vehicles for China that I put together for Crossfire many years ago. More recently I've based them individually for rules like Chain of Command, there's not a lot to choose from when it comes to this theatre in 20mm, so there's a mix of existing and converted figures and kits. There's a longer post with more pictures on the blog here http://thetacticalpainter.blogspot.com/2022/03/second-world-war-chinese-national-army.html

One of the very few ranges of figures include a very small group from Wargames Foundry:

(https://imagizer.imageshack.com/v2/1024x768q90/924/WehOM0.jpg) (https://imageshack.com/i/poWehOM0j)

Otherwise it's been a matter of adapting and converting existing sets like this HaT 7.7cm Feldkanone:

(https://imagizer.imageshack.com/v2/1024x768q90/923/ZE98T3.jpg) (https://imageshack.com/i/pnZE98T3j)

The Chinese bought tanks from a number of countries, so there's a nice selection of light tanks from the interwar years to include:

(https://imagizer.imageshack.com/v2/1024x768q90/922/4uB23m.jpg) (https://imageshack.com/i/pm4uB23mj)

(https://imagizer.imageshack.com/v2/1024x768q90/922/5zPONE.jpg) (https://imageshack.com/i/pm5zPONEj)
Title: Re: Tactical Painter's Second World War in 20mm (updated 16 03 22)
Post by: MaleGriffin on March 17, 2022, 03:39:33 PM
Very Nice!
Title: Re: Tactical Painter's Second World War in 20mm (updated 16 03 22)
Post by: TacticalPainter on March 22, 2022, 04:36:26 AM
Part of my NY resolution for 2022 was to finish off as many uncompleted projects as possible before embarking on any new ones (I know, I know....famous last words). Anyhow, so far at least, I've been doing that quite successfully.

Last year I made up the Armourfast Achilles. I detailed it with a bit of scratch building and plundering the spares box to make up an interior for the turret. To finish it off it needed stowage on the exterior and a crew. I have a couple of the resin stowage sets from Value Gear which are, perhaps unsurprisingly, great value. I couldn't find a specific crew and so I've used figures from various AB Figures sets. The Armourfast kits can be rather basic but I find with a bit of detailing they can be very presentable.

(https://imagizer.imageshack.com/v2/1024x768q90/924/ZTUdWR.jpg) (https://imageshack.com/i/poZTUdWRj)

(https://imagizer.imageshack.com/v2/1024x768q90/923/RfYexD.jpg) (https://imageshack.com/i/pnRfYexDj)

(https://imagizer.imageshack.com/v2/1024x768q90/922/8Wheue.jpg) (https://imageshack.com/i/pm8Wheuej)

Next up was an Archer. This one is from Early War Miniatures and was a mix of resin and metal. Not the crispest casting by any means but, a bit like Armourfast, much can be done by adding a few details and a crew. The crews for British self propelled AT guns came from anti tank gun units not armoured units and so didn't wear the black beret of the RAC (although from what I can see, they did wear Pixie suits). In my case I've kept the crew in the infantryman's steel helmet, as I've seen several pictures of crews like this. Once again the crew is made up of AB Figures and these come from the 17 pounder AT gun crew.

(https://imagizer.imageshack.com/v2/1024x768q90/924/6Af0LT.jpg) (https://imageshack.com/i/po6Af0LTj)

(https://imagizer.imageshack.com/v2/1024x768q90/922/kxkWFP.jpg) (https://imageshack.com/i/pmkxkWFPj)

(https://imagizer.imageshack.com/v2/1024x768q90/923/FR85zX.jpg) (https://imageshack.com/i/pnFR85zXj)

(https://imagizer.imageshack.com/v2/1024x768q90/923/GwMczi.jpg) (https://imageshack.com/i/pnGwMczij)

Title: Re: Tactical Painter's Second World War in 20mm (updated 22 03 22)
Post by: moiterei_1984 on March 22, 2022, 08:23:20 PM
Top notch as ever
Title: Re: Tactical Painter's Second World War in 20mm (updated 22 03 22)
Post by: Iain R on March 25, 2022, 10:31:30 PM
Lovely work!
Title: Re: Tactical Painter's Second World War in 20mm (updated 22 03 22)
Post by: gamer Mac on March 26, 2022, 01:09:24 AM
Great detail :-* :-* :-* :-* :-* :-*
Title: Re: Tactical Painter's Second World War in 20mm (updated 22 03 22)
Post by: tancrede on March 31, 2022, 08:59:22 AM
Lovely painting, sir !  :-*
And a chinese army is a nice change in this part of the forum !
Title: Re: Tactical Painter's Second World War in 20mm (updated 22 03 22)
Post by: Shahbahraz on April 01, 2022, 10:24:41 PM
Great painting. Lovely looking efforts as usual, with one slightly jarring thing which is the black bull insignia (11th Armoured) looks too big..   maybe 28mm decals on 20mm vehicles?
Title: Re: Tactical Painter's Second World War in 20mm (updated 22 03 22)
Post by: Digits on April 01, 2022, 11:52:06 PM
Great looking collection of models fella.
Title: Re: Tactical Painter's Second World War in 20mm (updated 22 03 22)
Post by: TacticalPainter on April 03, 2022, 10:56:56 PM
Great painting. Lovely looking efforts as usual, with one slightly jarring thing which is the black bull insignia (11th Armoured) looks too big..   maybe 28mm decals on 20mm vehicles?

Yeah I know. They were supposed to be 1/72 decals from PSC but I’ve always find them large, so not sure why I persisted using them. I’m thinking of covering them with camouflage netting rather than trying to paint them out.
Title: Re: Tactical Painter's Second World War in 20mm (updated 22 03 22)
Post by: TacticalPainter on April 04, 2022, 08:01:59 AM
Well Doug, you managed to spur me into action to sort out those large decals. I've been working on camouflage netting for another project so quickly applied it to the Achilles. Oversized decals sorted and an upgrade to the model at the same time. Result!

(https://imagizer.imageshack.com/v2/1024x768q90/924/3wKJtq.jpg) (https://imageshack.com/i/po3wKJtqj)

(https://imagizer.imageshack.com/v2/1024x768q90/922/mAz4nQ.jpg) (https://imageshack.com/i/pmmAz4nQj)
Title: Re: Tactical Painter's Second World War in 20mm (updated 04 04 22)
Post by: TacticalPainter on April 04, 2022, 08:04:44 AM
The other project was an upgrade to a old Armourfast Cromwell. Added stowage from Value Gear; camouflage netting made from a bandage and a crew figure from AB.

(https://imagizer.imageshack.com/v2/1024x768q90/924/jPs7Jq.jpg) (https://imageshack.com/i/pojPs7Jqj)

(https://imagizer.imageshack.com/v2/1024x768q90/923/4RSsiI.jpg) (https://imageshack.com/i/pn4RSsiIj)

(https://imagizer.imageshack.com/v2/1024x768q90/922/TKC3dm.jpg) (https://imageshack.com/i/pmTKC3dmj)

(https://imagizer.imageshack.com/v2/1024x768q90/922/7bLPyP.jpg) (https://imageshack.com/i/pm7bLPyPj)
Title: Re: Tactical Painter's Second World War in 20mm (updated 04 04 22)
Post by: Grumpy Gnome on April 04, 2022, 08:17:37 AM
You paint 20mm better than I paint 28mm, great work!
Title: Re: Tactical Painter's Second World War in 20mm (updated 04 04 22)
Post by: Mad Lord Snapcase on April 04, 2022, 08:21:10 AM
Really excellent work.   :-*
Title: Re: Tactical Painter's Second World War in 20mm (updated 04 04 22)
Post by: TacticalPainter on April 06, 2022, 06:36:28 AM
I have a fair few of the 'simpler' kits designed for gamers from the Plastic Soldier Company and Armourfast. As I've said before, they are not bad but they have their issues. The Armourfast stuff tends to be very basic and the PSC kits have a lot of rather chunky over-scale details. Both are robust for gaming as a result but often benefit from detailing to improve their look.

I've been going back to some of these to find ways to improve them. Like I did with the Achilles and Cromwell I can use camouflage netting to cover up parts of the kit. In other ways something as simple as a good crew figure can make a difference.

One of the issues with the PSC German kits is that the bow machine gun is a rather thick rod of plastic and looks nothing like an MG34, so with this PzIV and PzIII all I've done is replace the MG barrels with one from the spares box and added a crew figures from AB.

(https://imagizer.imageshack.com/v2/1024x768q90/924/fze2cg.jpg) (https://imageshack.com/i/pofze2cgj)

(https://imagizer.imageshack.com/v2/1024x768q90/924/uQp4Kb.jpg) (https://imageshack.com/i/pouQp4Kbj)

(https://imagizer.imageshack.com/v2/1024x768q90/923/C038Pf.jpg) (https://imageshack.com/i/pnC038Pfj)

(https://imagizer.imageshack.com/v2/1024x768q90/924/BTdraU.jpg) (https://imageshack.com/i/poBTdraUj)
Title: Re: Tactical Painter's Second World War in 20mm (updated 04 04 22)
Post by: TacticalPainter on April 06, 2022, 06:39:08 AM
In the case of the very nice Tiger I from Revell the kit hasn't needed anything more than replacing the original crew figure I had used (a spare one from a PSC set) with one from AB. 

(https://imagizer.imageshack.com/v2/1024x768q90/923/cQIGI3.jpg) (https://imageshack.com/i/pncQIGI3j)
Title: Re: Tactical Painter's Second World War in 20mm (updated 06 04 22)
Post by: Blackwolf on April 06, 2022, 07:19:01 AM
Great painting!
Title: Re: Tactical Painter's Second World War in 20mm (updated 06 04 22)
Post by: gamer Mac on April 09, 2022, 04:07:50 PM
Stunning work :-* :-* :-* :-* :-* :-*
Title: Re: Tactical Painter's Second World War in 20mm (updated 06 04 22)
Post by: Shahbahraz on April 09, 2022, 04:26:23 PM
Lovely stuff.. I confess I had fun with late war camouflage too in 1/72

(http://4.bp.blogspot.com/-oo6LpJEBiq4/U4B8QBU8WiI/AAAAAAAAB28/iJTv8BeSzx0/s1600/cromwellwip2.jpg)

(https://4.bp.blogspot.com/-6HEz5i-ln34/U4xLTzvJqKI/AAAAAAAAB4Y/7UxgtFnHQkE/s1600/cromwell1a.jpg)

But yes, those look way better, and with markings obscured you won't feel guilty about proxying for 6th Guards or 7th Armoured..
Title: Re: Tactical Painter's Second World War in 20mm (updated 06 04 22)
Post by: CapnJim on April 10, 2022, 09:31:19 PM
Nice tanks you have there.  Love 'em!
Title: Re: Tactical Painter's Second World War in 20mm (updated 06 04 22)
Post by: TacticalPainter on April 15, 2022, 11:26:21 AM
I've wanted a Soviet DhSK 12.7mm and crew but have had trouble finding something. My best solution has been to use  set of AB crew for a Maxim and add it to a gun from SHQ.

(https://imagizer.imageshack.com/v2/1024x768q90/922/c5F39e.jpg) (https://imageshack.com/i/pmc5F39ej)

(https://imagizer.imageshack.com/v2/1024x768q90/924/2wRRaP.jpg) (https://imageshack.com/i/po2wRRaPj)

(https://imagizer.imageshack.com/v2/1024x768q90/922/rMmti1.jpg) (https://imageshack.com/i/pmrMmti1j)
Title: Re: Tactical Painter's Second World War in 20mm (updated 15 04 22)
Post by: vodkafan on April 16, 2022, 12:21:00 AM
That works for me... :)
Title: Re: Tactical Painter's Second World War in 20mm (updated 15 04 22)
Post by: CapnJim on April 17, 2022, 08:39:43 PM
Nice DShK.  Well done!
Title: Re: Tactical Painter's Second World War in 20mm (updated 15 04 22)
Post by: TacticalPainter on April 22, 2022, 11:55:10 PM
An addition to the early war Far East British collection. The venerable 18 pounder was still in service in the 1930s. The carriage was modified and wheels changed to pneumatic tyres so the gun could be towed by a vehicle. Other than the inclusion of an AP round it was much the same gun that served so well in 1914-18. At the start of the second world war a number went to France with the BEF and a number were already stationed in Hong Kong, Malaya and Burma. The gun model is from SHQ and the crew are from the AB set for the 25pdr in the Western Desert. I've hazard a guess it was painted in pre-war Bronze Green and likely remained that colour, but as I say, it's a guess.

(https://imagizer.imageshack.com/v2/1024x768q90/923/y6PkUV.jpg) (https://imageshack.com/i/pny6PkUVj)

(https://imagizer.imageshack.com/v2/1024x768q90/922/8JWQAc.jpg) (https://imageshack.com/i/pm8JWQAcj)

(https://imagizer.imageshack.com/v2/1024x768q90/923/PMWIzL.jpg) (https://imageshack.com/i/pnPMWIzLj)
Title: Re: Tactical Painter's Second World War in 20mm (updated 23 04 22)
Post by: TacticalPainter on April 28, 2022, 03:40:10 AM
One incentive to getting the 18pdr gun finished has been the play testing we have been doing for the forthcoming Far East Handbook for Chain of Command. At the moment the focus is on the early part of the war in places like Hong Kong, Malaya and Burma with a particular focus on how best to represent the Japanese and the specific terrain of the region, particularly jungle. There are some very nice ideas in draft form at the moment so we took the opportunity of a club night to play a game set in Malaya and use my early war Far East British. Overall the theatre specific rules are playing out very well and are definitely heading in the right direction. If nothing else it was good to get the Far East terrain and figures out again.

(https://imagizer.imageshack.com/v2/1024x768q90/923/zsP7P9.jpg) (https://imageshack.com/i/pnzsP7P9j)

(https://imagizer.imageshack.com/v2/1024x768q90/923/A3h7fE.jpg) (https://imageshack.com/i/pnA3h7fEj)

(https://imagizer.imageshack.com/v2/1024x768q90/924/UbrAgg.jpg) (https://imageshack.com/i/poUbrAggj)

(https://imagizer.imageshack.com/v2/1024x768q90/923/vHVHxu.jpg) (https://imageshack.com/i/pnvHVHxuj)
Title: Re: Tactical Painter's Second World War in 20mm (updated 28 04 22)
Post by: Grumpy Gnome on April 28, 2022, 07:41:59 AM
Looking good mate…. And keen to see that new book getting published!
Title: Re: Tactical Painter's Second World War in 20mm (updated 28 04 22)
Post by: gamer Mac on April 28, 2022, 10:40:44 AM
Great looking table and figures :-* :-* :-* :-* :-* :-*
Title: Re: Tactical Painter's Second World War in 20mm (updated 28 04 22)
Post by: CapnJim on May 03, 2022, 10:12:22 PM
Great looking table and figures :-* :-* :-* :-* :-* :-*

Wot he dun said!
Title: Re: Tactical Painter's Second World War in 20mm (updated 28 04 22)
Post by: Shahbahraz on May 07, 2022, 08:54:07 PM
Yep.. my forces for Malaya are awaiting the publication..  Lanchester armoured cars standing by.
Title: Re: Tactical Painter's Second World War in 20mm (updated 28 04 22)
Post by: Unlucky General on June 14, 2022, 08:39:01 AM
TP,

I've tended to be very quiet lately but wanted to let you know how much I love and admire your work. Just lovely to look at - the models and the photography.
Title: Re: Tactical Painter's Second World War in 20mm (updated 28 04 22)
Post by: MaleGriffin on June 14, 2022, 02:16:53 PM
Beautiful game! Great terrain! Fantastic figures!
Title: Re: Tactical Painter's Second World War in 20mm (updated 28 04 22)
Post by: Golgotha on July 13, 2022, 06:56:39 PM
Love it all - very impressive. The tropical plants in particular are nicely done...
Title: Re: Tactical Painter's Second World War in 20mm (updated 28 04 22)
Post by: JohnFoA on July 21, 2022, 09:25:26 AM
A really interesting general post.  Love the early Chinese Nats.  IIRC their Pz1s might be in two-tone camo, but Fall Gelb not so much.

I look forward to reading your Far East CoC expansion, always intrigued how people handle jungle.

I'll be back


Cheers

John
Title: Re: Tactical Painter's Second World War in 20mm (updated 28 04 22)
Post by: TacticalPainter on July 22, 2022, 03:15:20 AM
A really interesting general post.  Love the early Chinese Nats.  IIRC their Pz1s might be in two-tone camo, but Fall Gelb not so much.

I look forward to reading your Far East CoC expansion, always intrigued how people handle jungle.

I'll be back

Thanks. Rules for jungle were created for a campaign set in Malaya but now that the Lardies are putting out a Far East supplement they are revisiting all the rules. Some will remain unchanged and a few are fine tuned. If you're interested in following how we've played with the Japanese so far you might want to look at how we played the Malaya campaign (called Malaya 1942) and one set in Singapore (called Last Stand on Opium Hill). You can find links to every game on this page http://thetacticalpainter.blogspot.com/p/chain-of-command-campaign-aars.html

(https://imagizer.imageshack.com/v2/1024x768q90/922/0EQuGm.jpg) (https://imageshack.com/i/pm0EQuGmj)

(https://imagizer.imageshack.com/v2/1024x768q90/922/ArTbiZ.jpg) (https://imageshack.com/i/pmArTbiZj)

(https://imagizer.imageshack.com/v2/1024x768q90/924/rceNzB.jpg) (https://imageshack.com/i/porceNzBj) 
Title: Re: Tactical Painter's Second World War in 20mm (updated 28 04 22)
Post by: TacticalPainter on July 29, 2022, 04:29:47 AM
Inspired by the Major Thomas Foolery blog I think I've found a solution to creating scatter terrain for my Far East games in places like Hong Kong, Singapore, Malaya and Burma. I converted this Lledo Dennis van and there's a bit more detail on how I did it here http://thetacticalpainter.blogspot.com/2022/07/converting-die-cast-vehicles-for-second.html

(https://imagizer.imageshack.com/v2/1024x768q90/923/bM33Y8.jpg) (https://imageshack.com/i/pnbM33Y8j)

(https://imagizer.imageshack.com/v2/1024x768q90/924/pHLEHh.jpg) (https://imageshack.com/i/popHLEHhj)

(https://imagizer.imageshack.com/v2/1024x768q90/924/fBp64N.jpg) (https://imageshack.com/i/pofBp64Nj)
Title: Re: Tactical Painter's Second World War in 20mm (updated 29 07 22)
Post by: Digits on July 29, 2022, 05:03:55 AM
I really like that, great idea!
Title: Re: Tactical Painter's Second World War in 20mm (updated 29 07 22)
Post by: Shahbahraz on July 29, 2022, 07:46:54 AM
That's come up really well, now stop mucking about painting stuff unless it's for a forthcoming campaign.  :) 

Seems like the TFL Far East supplement is still some time away, so we're back to doing European battles. I'm hoping to do Bloody Bucket next... still some figs to finish.   
Title: Re: Tactical Painter's Second World War in 20mm (updated 29 07 22)
Post by: Grumpy Gnome on July 29, 2022, 08:31:29 AM
Loving it mate! Brilliant work on that truck. Very inspirational!
Title: Re: Tactical Painter's Second World War in 20mm (updated 29 07 22)
Post by: gamer Mac on July 30, 2022, 08:15:25 PM
Great work on the truck :-* :-* :-* :-* :-* :-*
Title: Re: Tactical Painter's Second World War in 20mm (updated 29 07 22)
Post by: CapnJim on July 31, 2022, 04:14:25 PM
Love the redo on that truck.  It sure looks the part.
Title: Re: Tactical Painter's Second World War in 20mm (updated 29 07 22)
Post by: TacticalPainter on August 09, 2022, 03:26:04 AM
A few Japanese additions. These are all from SHQ. Their figure sculpts are slimmer than most other 20mm ranges and they don't always sit well side by side with them, however in the case of gun crews I don't think that really matters. As long as the crew all fit together the chances are they won't be seen directly adjacent to other figures anyway. It's a strange thing, but I'm always a bit disappointed when I first receive SHQ figures yet they never fail to paint up well and look the part.

Here is a 47mm AT gun and crew:

(https://imagizer.imageshack.com/v2/1024x768q90/923/qm6lMx.jpg) (https://imageshack.com/i/pnqm6lMxj)

(https://imagizer.imageshack.com/v2/1024x768q90/924/kcEbM1.jpg) (https://imageshack.com/i/pokcEbM1j)

(https://imagizer.imageshack.com/v2/1024x768q90/924/v5apFd.jpg) (https://imageshack.com/i/pov5apFdj)

A few extra casualties to add to the mix. They are always handy for illustrating the AARs and it seems you can never have enough.

(https://imagizer.imageshack.com/v2/1024x768q90/922/BUb00H.jpg) (https://imageshack.com/i/pmBUb00Hj)

(https://imagizer.imageshack.com/v2/1024x768q90/922/54P67z.jpg) (https://imageshack.com/i/pm54P67zj)
Title: Re: Tactical Painter's Second World War in 20mm (updated 09 08 22)
Post by: CapnJim on August 09, 2022, 04:41:27 PM
More great-looking stuff.  Well done again!
Title: Re: Tactical Painter's Second World War in 20mm (updated 09 08 22)
Post by: TacticalPainter on August 30, 2022, 11:33:19 AM
I've painted up the lovely set of AB Figures British tank crew bailing out to use in photographs to illustrate the Chain of Command AARs on the blog. As always with AB, these are very expressive figures that all help tell the story. More pictures of these and the German set here http://thetacticalpainter.blogspot.com/2022/08/bail-out-20mm-ab-crews-abandoning-tanks.html

(https://imagizer.imageshack.com/v2/1024x768q90/924/Xtvypq.jpg) (https://imageshack.com/i/poXtvypqj)

(https://imagizer.imageshack.com/v2/1024x768q90/923/lA2Z9Z.jpg) (https://imageshack.com/i/pnlA2Z9Zj)

(https://imagizer.imageshack.com/v2/1024x768q90/923/6nEg3t.jpg) (https://imageshack.com/i/pn6nEg3tj)

(https://imagizer.imageshack.com/v2/1024x768q90/924/pHT02f.jpg) (https://imageshack.com/i/popHT02fj)
Title: Re: Tactical Painter's Second World War in 20mm (updated 30 08 22)
Post by: Grumpy Gnome on August 30, 2022, 08:30:37 PM
You continue to impress! 👍
Title: Re: Tactical Painter's Second World War in 20mm (updated 30 08 22)
Post by: Blackwolf on August 30, 2022, 11:18:45 PM
Lovely work, the Churchill is excellent (my fave tank).
And nice to see such good painting here in Oz :)
Title: Re: Tactical Painter's Second World War in 20mm (updated 30 08 22)
Post by: CapnJim on September 11, 2022, 08:34:35 PM
Okay.  Now you're just showing off...   :D
Title: Re: Tactical Painter's Second World War in 20mm (updated 30 08 22)
Post by: TacticalPainter on September 11, 2022, 10:53:16 PM
Okay.  Now you're just showing off...   :D

😂😂
Title: Re: Tactical Painter's Second World War in 20mm (updated 30 08 22)
Post by: TacticalPainter on September 16, 2022, 02:18:42 AM
A small addition for the Japanese. This is a set of three mules and their handlers that comes from the 172 Miniatures range. I have in mind a few Chindit raiding scenarios and envisage these being amongst the targets.

(https://imagizer.imageshack.com/v2/1024x768q90/922/BkDGHD.jpg) (https://imageshack.com/i/pmBkDGHDj)

(https://imagizer.imageshack.com/v2/1024x768q90/923/Ke41Wt.jpg) (https://imageshack.com/i/pnKe41Wtj)

(https://imagizer.imageshack.com/v2/1024x768q90/923/BwTNWf.jpg) (https://imageshack.com/i/pnBwTNWfj)

Title: Re: Tactical Painter's Second World War in 20mm (updated 16 09 22)
Post by: Shahbahraz on September 16, 2022, 06:53:21 AM
Very nice. It was the Airfix German Mountain Troops set that came with a mule IIRC, in grey blue plastic. Nice model as I recall. Now wondering who does a pack mule STL.
Title: Re: Tactical Painter's Second World War in 20mm (updated 16 09 22)
Post by: TacticalPainter on September 16, 2022, 07:37:02 AM
Very nice. It was the Airfix German Mountain Troops set that came with a mule IIRC, in grey blue plastic. Nice model as I recall. Now wondering who does a pack mule STL.

Thanks. The Airfix Jungle Hut came with a few mules and Japanese handlers. I have two sets of them in a box somewhere. The figures were quite small but might match up okay with these. Will give me a pretty good size mule train (if you were a Chindit you might describe it as a target rich environment 🙄)
Title: Re: Tactical Painter's Second World War in 20mm (updated 16 09 22)
Post by: gamer Mac on September 16, 2022, 05:09:28 PM
Very nice addition :-* :-* :-*
Title: Re: Tactical Painter's Second World War in 20mm (updated 16 09 22)
Post by: Shahbahraz on September 16, 2022, 07:59:21 PM
Thanks. The Airfix Jungle Hut came with a few mules and Japanese handlers. I have two sets of them in a box somewhere. The figures were quite small but might match up okay with these. Will give me a pretty good size mule train (if you were a Chindit you might describe it as a target rich environment 🙄)

I am not quite sure how best to wargame Chindit operations, given they rarely did 'stand-up' fights, and were more tasked with hit and run. Though building a Wingate figure would be interesting. Who does a 28mm bible and bearded fanatic? :)
Title: Re: Tactical Painter's Second World War in 20mm (updated 16 09 22)
Post by: TacticalPainter on September 17, 2022, 12:40:42 AM
I am not quite sure how best to wargame Chindit operations, given they rarely did 'stand-up' fights, and were more tasked with hit and run. Though building a Wingate figure would be interesting. Who does a 28mm bible and bearded fanatic? :)

I have made notes for a PSC with Chindits. The idea is they don’t follow the traditional ladder structure in sequential order but rather approach different maps from a couple of ‘off ladder’ maps conducting raids and hit and run. Challenge for the Japanese player is where to allocate units to protect the LOC, but also allow an option for a ‘counterattack’ where they send out a force on a search and destroy mission. I’m sure I can make it enjoyable for the Chindit player, hopefully I can find enough to make it the same for the Japanese.
Title: Re: Tactical Painter's Second World War in 20mm (updated 16 09 22)
Post by: Hu Rhu on September 17, 2022, 09:15:36 PM
Don't forget that in the second Chindit campaign, the Chindits defended two localities - White City and Broadway, as well as a temporary base at Blackpool. There was heavy fighting in all three locations.

In addition there was the attack on Indaw by Ferguson's brigade and Mogaung by Calvert's brigade. 
Title: Re: Tactical Painter's Second World War in 20mm (updated 16 09 22)
Post by: TacticalPainter on September 23, 2022, 09:21:24 AM
Not the most exciting of additions but everyone needs trucks. These are from the Plastic Soldier Company set of German trucks. I made up one of the Opel Blitz a while ago to serve as a civilian truck, but I've only now got around to finishing off the others. You get three kits in a box but there are options for both Opel and Mercedes cabs and so I've been able to squeeze out a fourth kit by using some of the left over parts and doing a bit of scratchbuilding to give me an extra Mercedes truck.

(https://imagizer.imageshack.com/v2/1024x768q90/922/f3guds.jpg) (https://imageshack.com/i/pmf3gudsj)

(https://imagizer.imageshack.com/v2/1024x768q90/923/g782Sl.jpg) (https://imageshack.com/i/png782Slj)

(https://imagizer.imageshack.com/v2/1024x768q90/924/DTXngO.jpg) (https://imageshack.com/i/poDTXngOj)

(https://imagizer.imageshack.com/v2/1024x768q90/923/xgQ6mV.jpg) (https://imageshack.com/i/pnxgQ6mVj)
Title: Re: Tactical Painter's Second World War in 20mm (updated 23 09 22)
Post by: TacticalPainter on September 26, 2022, 05:53:44 AM
While I had the airbrush out I finally got around to putting paint on a few allied vehicles that were intended to be lend-lease Red Army AFVs.

The Valentine and Sherman are from Plastic Soldier Company and the Matilda from S-Models. Crew are from AB Figures.

(https://imagizer.imageshack.com/v2/xq90/922/pK5YrM.jpg) (https://imageshack.com/i/pmpK5YrMj)

(https://imagizer.imageshack.com/v2/xq90/924/ZsG0dx.jpg) (https://imageshack.com/i/poZsG0dxj)

(https://imagizer.imageshack.com/v2/xq90/923/fDxF1R.jpg) (https://imageshack.com/i/pnfDxF1Rj)

(https://imagizer.imageshack.com/v2/xq90/924/svHO6f.jpg) (https://imageshack.com/i/posvHO6fj)
Title: Re: Tactical Painter's Second World War in 20mm (updated 26 09 22)
Post by: CapnJim on September 26, 2022, 06:21:40 PM
Lovely trucks and tanks.  Especially the tanks!  :D

Well done again!
Title: Re: Tactical Painter's Second World War in 20mm (updated 26 09 22)
Post by: MaleGriffin on September 27, 2022, 03:42:57 AM
Lovely vehicles! I really love the dirt om the running gear!
Title: Re: Tactical Painter's Second World War in 20mm (updated 26 09 22)
Post by: hayeswauford on September 30, 2022, 03:44:26 AM
Gorgeous work on those trucks and tanks!!!
Title: Re: Tactical Painter's Second World War in 20mm (updated 26 09 22)
Post by: TacticalPainter on October 02, 2022, 05:09:04 AM
While I was painting up the lend lease Russian tanks I also painted up a Dragon T34/85. Nice kit with much better detailing than the PSC kits (that said, the PSC kits are more robust for gaming). I made this one specifically to have some of the AB tank riders mounted. I've actually glued these in place as I think it makes a lovely piece that's almost a little diorama in its own right and I wanted something for those games where I use tankodestantniki.

(https://imagizer.imageshack.com/v2/1024x768q90/923/QMezOb.jpg) (https://imageshack.com/i/pnQMezObj)

(https://imagizer.imageshack.com/v2/1024x768q90/922/msjGUq.jpg) (https://imageshack.com/i/pmmsjGUqj)

(https://imagizer.imageshack.com/v2/1024x768q90/922/6S7ogd.jpg) (https://imageshack.com/i/pm6S7ogdj)

Title: Re: Tactical Painter's Second World War in 20mm (updated 2 10 22)
Post by: Freddy on October 02, 2022, 12:25:38 PM
A really great clean paintjob, the weathering is just fitting the scale, not overdone.
Title: Re: Tactical Painter's Second World War in 20mm (updated 2 10 22)
Post by: Eclaireur on October 02, 2022, 06:51:50 PM
You're right - the tank riders look great on that
EC
Title: Re: Tactical Painter's Second World War in 20mm (updated 2 10 22)
Post by: CapnJim on October 04, 2022, 04:34:11 PM
Yup - I think they look great too!
Title: Re: Tactical Painter's Second World War in 20mm (updated 2 10 22)
Post by: TacticalPainter on October 07, 2022, 06:44:02 AM
Something a little different. I bought six railway carriages on eBay some time ago and I've been hoping to find a suitable locomotive to go with them. It is possible to find fairly cheap 'non-runners' given most railway modellers prefer a working train, but so far no luck. In the end I decided to make one of the Dapol kits. These were first released by Kitmaster in the last 1950s before going to Airfix for many years. Considering their age they hold up very well and more importantly they are very reasonably priced. It was a bit more work than I was hoping to do, but I actually found it a nice change from the usual mix of guns and armour. This can be for scatter terrain (I'm thinking railyards in a major city) or for a scenario (partisan action?).

(https://imagizer.imageshack.com/v2/1024x768q90/922/bHYVMQ.jpg) (https://imageshack.com/i/pmbHYVMQj)

(https://imagizer.imageshack.com/v2/1024x768q90/923/lPtmzt.jpg) (https://imageshack.com/i/pnlPtmztj)
Title: Re: Tactical Painter's Second World War in 20mm (updated 7 10 22)
Post by: Shahbahraz on October 07, 2022, 12:35:25 PM
Nice, I've been looking for a cheap equivalent for 28mm for some time with no luck. All the various stl files are designed to sit on railway modellers chassis and gubbins... and O gauge running gear isn't cheap!  Any suggestions welcome...
Title: Re: Tactical Painter's Second World War in 20mm (updated 7 10 22)
Post by: hayeswauford on October 10, 2022, 03:55:52 AM
 LOVE the Russian armor and the trains!!! Can’t wait to see them in action!
Title: Re: Tactical Painter's Second World War in 20mm (updated 7 10 22)
Post by: TacticalPainter on October 10, 2022, 05:11:40 AM
I'm on a bit of a roll at the moment with the Second World War stuff and finishing off several projects that have needed doing for some time. One of those was a crew for one of my SU76. The AFV is a kit from UM and I had used a couple of spare Russian mortar crew figures from one of the Plastic Soldier Company sets as the gun crew. They never looked quite right and so I picked up some of the AB crew figures last year when I placed an order for some other things. They are now painted and in the SU76.

(https://imagizer.imageshack.com/v2/1024x768q90/924/j61vgR.jpg) (https://imageshack.com/i/poj61vgRj)

(https://imagizer.imageshack.com/v2/1024x768q90/923/XzXmKH.jpg) (https://imageshack.com/i/pnXzXmKHj)

(https://imagizer.imageshack.com/v2/1024x768q90/922/QVetCy.jpg) (https://imageshack.com/i/pmQVetCyj)

It was great to see a SU76 up close on a recent visit up to the Australian Armour and Artillery Museum. It was one of several Russian AFVs they have in their very impressive collection.

(https://imagizer.imageshack.com/v2/1024x768q90/923/VnLOtH.jpg) (https://imageshack.com/i/pnVnLOtHj)

Another purchase made at the same time was the set of Russian casualty figures, something I've found very useful for using in photographs of the Chain of Command games on the blog. Once again these are from AB.

(https://imagizer.imageshack.com/v2/1024x768q90/924/h5NQfC.jpg) (https://imageshack.com/i/poh5NQfCj)

(https://imagizer.imageshack.com/v2/1024x768q90/922/PkaWP0.jpg) (https://imageshack.com/i/pmPkaWP0j)
Title: Re: Tactical Painter's Second World War in 20mm (updated 10 10 22)
Post by: TacticalPainter on October 12, 2022, 12:52:33 PM
Now for a slightly different shade of green and a few American vehicles. Two tank destroyers from Armourfast with crews from AB Figures to round out my US AFV collection - a M18 Hellcat and a M36 Jackson.

(https://imagizer.imageshack.com/v2/1024x768q90/923/byhwup.jpg) (https://imageshack.com/i/pnbyhwupj)

(https://imagizer.imageshack.com/v2/1024x768q90/922/I5DkZO.jpg) (https://imageshack.com/i/pmI5DkZOj)

(https://imagizer.imageshack.com/v2/1024x768q90/922/jqYG4G.jpg) (https://imageshack.com/i/pmjqYG4Gj)

(https://imagizer.imageshack.com/v2/1024x768q90/922/lioR5r.jpg) (https://imageshack.com/i/pmlioR5rj)

And something for the late war. A M26 Pershing from Trumpeter with a crew from AB once again.

(https://imagizer.imageshack.com/v2/1024x768q90/922/tcBd8B.jpg) (https://imageshack.com/i/pmtcBd8Bj)

(https://imagizer.imageshack.com/v2/1024x768q90/922/Qe72Xh.jpg) (https://imageshack.com/i/pmQe72Xhj)
Title: Re: Tactical Painter's Second World War in 20mm (updated 12 10 22)
Post by: Shahbahraz on October 12, 2022, 07:10:28 PM
I have the trumpeter kit as well. But not doing 20mm any more.
Title: Re: Tactical Painter's Second World War in 20mm (updated 12 10 22)
Post by: TacticalPainter on October 14, 2022, 05:52:30 AM
The reason I made the Pershing and M36 was driven by seeing the Bazooka Town campaign for Chain of Command in the 2021 Lard Magazine. It's set in 1945 and the Americans have a Pershing and a M36 Jackson available as support options, so that inspired me to add those two to the collection.

More unusually the campaign features two Tiger IIs, something you don't expect to see in a platoon level skirmish game. Even more bizarre I actually had a box of two Tiger IIs from Pegasus Hobbies that I'd never made and had even failed to sell at a convention bring & buy sale. I unearthed them from the stash and completing them means I have all I need to start the campaign should I wish. As always with these quick build kits the level of detail is not high, but I think they will do the job. The crew figure is from AB. There's more about them in a post on the blog here https://thetacticalpainter.blogspot.com/2022/10/a-tale-of-two-tigers.html

(https://imagizer.imageshack.com/v2/1024x768q90/924/Pk0KWc.jpg) (https://imageshack.com/i/poPk0KWcj)

(https://imagizer.imageshack.com/v2/1024x768q90/924/QTvN8y.jpg) (https://imageshack.com/i/poQTvN8yj)
Title: Re: Tactical Painter's Second World War in 20mm (updated 12 10 22)
Post by: Grumpy Gnome on October 14, 2022, 08:17:04 AM
Brilliant work across the board mate, loving it all! 👍
Title: Re: Tactical Painter's Second World War in 20mm (updated 12 10 22)
Post by: CapnJim on October 14, 2022, 05:48:52 PM
It's interesting your last 2 sets of vehicles were big cats, and big cat killers...

Lovely work on all of them.  And, level of detail notwithstanding, those Tiger IIs look great.  Well, so do the M18 and M36.. :D
Title: Re: Tactical Painter's Second World War in 20mm (updated 12 10 22)
Post by: Shahbahraz on October 14, 2022, 09:50:46 PM
At that date in the war, no spares so no track lengths on the turret and you could have just painted grey barrels and red oxide all over... sad you didn't go for octopus camo..  I would love to see what you could do with that..

(https://www.worldwarphotos.info/wp-content/gallery/germany/tanks/tiger2/Tiger_2_tank_2.jpg)



Title: Re: Tactical Painter's Second World War in 20mm (updated 12 10 22)
Post by: TacticalPainter on October 20, 2022, 10:57:46 PM
A few pieces of scatter terrain in the form of more conversions of Lledo die cast trucks for the Far East. I posted the locomotive earlier and now I've added a small MDF train station.

(https://imagizer.imageshack.com/v2/1024x768q90/924/NhclSM.jpg) (https://imageshack.com/i/poNhclSMj)

(https://imagizer.imageshack.com/v2/1024x768q90/924/NH6meR.jpg) (https://imageshack.com/i/poNH6meRj)

(https://imagizer.imageshack.com/v2/1024x768q90/922/Rz6f0o.jpg) (https://imageshack.com/i/pmRz6f0oj)

(https://imagizer.imageshack.com/v2/1024x768q90/924/btmkeP.jpg) (https://imageshack.com/i/pobtmkePj)
Title: Re: Tactical Painter's Second World War in 20mm (updated 21 10 22)
Post by: Gunner Dunbar on October 20, 2022, 11:15:46 PM
Hi mate

Nice thread, like those trucks, I went back and looked at your locomotive, nice build, what particular Dapol model is it? And what is it’s scale? I bought a Trumpeter German locomotive kit a few years back, but it’s 1/87, thought it may be a bit small, so never built it, wish there were more readily available 1/72 train models, there maybe, I’m just unfamiliar with that whole side of the hobby.
Title: Re: Tactical Painter's Second World War in 20mm (updated 21 10 22)
Post by: TacticalPainter on October 21, 2022, 03:54:06 AM
Hi mate

Nice thread, like those trucks, I went back and looked at your locomotive, nice build, what particular Dapol model is it? And what is it’s scale? I bought a Trumpeter German locomotive kit a few years back, but it’s 1/87, thought it may be a bit small, so never built it, wish there were more readily available 1/72 train models, there maybe, I’m just unfamiliar with that whole side of the hobby.

Thanks. The locomotive is a Schools Class. The Dapol kits are OO scale, so perfect for 1/72. I’ve looked at the Trumpeter kits as they look very good but hadn’t realised they were 1/87 (that’s HO scale in model railway speak). The Dapol kits are much cheaper but much older and probably nowhere near as detailed.
Title: Re: Tactical Painter's Second World War in 20mm (updated 21 10 22)
Post by: Gunner Dunbar on October 21, 2022, 01:43:02 PM
 Did a bit more research, they also do 3 1/72 kits, I think those came out after the 1/87 ones, I might pick up one of those Dapol kits, about half the price of the trumpeter ones.
Title: Re: Tactical Painter's Second World War in 20mm (updated 21 10 22)
Post by: Dr Bogo on October 21, 2022, 02:52:47 PM
So much to like on this thread - I think the Chinese trucks are my favourite but the station and the Tiger IIs are both great as well, very jealous mate.
Title: Re: Tactical Painter's Second World War in 20mm (updated 21 10 22)
Post by: Golgotha on October 22, 2022, 10:10:05 AM
Love the tap and bucket on the building - its all lovely - keep 'em coming...
Title: Re: Tactical Painter's Second World War in 20mm (updated 21 10 22)
Post by: CapnJim on October 22, 2022, 07:15:37 PM
Yeah - the trucks and that building do indeed look good.  Well done!
Title: Re: Tactical Painter's Second World War in 20mm (updated 21 10 22)
Post by: hayeswauford on October 22, 2022, 11:42:08 PM
Love those trucks!!!!!
Title: Re: Tactical Painter's Second World War in 20mm (updated 21 10 22)
Post by: TacticalPainter on October 31, 2022, 04:07:00 AM
I had one die cast truck left over and wasn't sure what to do with it. I'm working on a campaign for the Chindits and that will need a few Japanese trucks so I thought I could paint up this one imagining it is a captured or requisitioned civilian truck in Burma. Just did a simple paint job in Khaki and added a driver.

(https://imagizer.imageshack.com/v2/1024x768q90/923/3ZaWz9.jpg) (https://imageshack.com/i/pn3ZaWz9j)

(https://imagizer.imageshack.com/v2/1024x768q90/924/kMIK7j.jpg) (https://imageshack.com/i/pokMIK7jj)

More for the Japanese in the shape of a Type 92 Chi Ha Shinhoto (the later model of the Chi Ha with the larger turret and 47mm gun). This one in resin from the 172 Miniatures range:

(https://imagizer.imageshack.com/v2/1024x768q90/924/kIlWGL.jpg) (https://imageshack.com/i/pokIlWGLj)

This Type 89B is a rather nice plastic kit from IBG which includes photo etch parts:

(https://imagizer.imageshack.com/v2/1024x768q90/924/nFg9M5.jpg) (https://imageshack.com/i/ponFg9M5j)

Lastly, this is a Precise Ho-Ni that I picked up very cheaply on eBay many years ago at the same time I bought a few of their Ha Go. From what I understand the Precise range was designed to be sold as part of a magazine or something similar but that never evenuated despite the fact the models had been manufactured. They went out cheaply on eBay as a result, but I now see they are fetching higher prices. Nothing very special - they came pre-painted and virtually fully assembled bar a few pieces but do suffer from thin, rubber tracks. They only saw action in the Philippines late in the war but I thought I might as well paint it while I'm doing other Japanese tanks.

(https://imagizer.imageshack.com/v2/1024x768q90/923/8z4lbu.jpg) (https://imageshack.com/i/pn8z4lbuj)

And altogether:

(https://imagizer.imageshack.com/v2/1024x768q90/924/NpKSnl.jpg) (https://imageshack.com/i/poNpKSnlj)
Title: Re: Tactical Painter's Second World War in 20mm (updated 31 10 22)
Post by: CapnJim on November 02, 2022, 04:34:52 PM
More great stuff there.  Keep it coming!
Title: Re: Tactical Painter's Second World War in 20mm (updated 31 10 22)
Post by: Grumpy Gnome on November 03, 2022, 07:03:46 AM
Loving it all mate!
Title: Re: Tactical Painter's Second World War in 20mm (updated 31 10 22)
Post by: TacticalPainter on December 13, 2022, 11:52:26 PM
I've put together a blog post on making the rail station for the Far East but also one that talks about the other rail related terrain I've put together for the period. You can see it here http://thetacticalpainter.blogspot.com/2022/12/a-train-station-for-far-east.html

(https://imagizer.imageshack.com/v2/1024x768q90/924/btmkeP.jpg) (https://imageshack.com/i/pobtmkePj)

There's also mention of this signal box for East Prussia but you can see that full build in this post if that's of interest http://thetacticalpainter.blogspot.com/2019/02/railway-signal-box.html

(https://imagizer.imageshack.com/v2/1024x768q90/924/jo97nB.jpg) (https://imageshack.com/i/pojo97nBj)
Title: Re: Tactical Painter's Second World War in 20mm (updated 14 12 22)
Post by: CapnJim on December 14, 2022, 12:08:33 AM
Those look good!
Title: Re: Tactical Painter's Second World War in 20mm (updated 14 12 22)
Post by: Shahbahraz on December 14, 2022, 01:00:57 AM
Very nice, as always, and having seen your work on the delivery trucks, I think I am going to take a punt on some Matchbox Yesteryear models for my 28mm. I believe they should be around 1/50.
Title: Re: Tactical Painter's Second World War in 20mm (updated 14 12 22)
Post by: TacticalPainter on March 14, 2023, 06:03:07 AM
Now that we are playing the Ruckzug campaign for Chain of Command I thought it would be good to have a few broken down German vehicles as scatter terrain. Obviously plenty of other uses too. I've had this Roden Opel Blitz Omnibus in the stash for a little while with a project like this in mind. So nothing like a campaign or a game to revive a project. I particularly liked the option to have the bonnet open and the engine revealed, it fits the narrative of the abandoned, broken down vehicle very well and will certainly fit the theme of the Ruckzug campaign.

(https://imagizer.imageshack.com/v2/1024x768q70/922/MrTWit.jpg) (https://imageshack.com/i/pmMrTWitj)

(https://imagizer.imageshack.com/v2/1024x768q70/924/uMQz1C.jpg) (https://imageshack.com/i/pouMQz1Cj)

(https://imagizer.imageshack.com/v2/1024x768q70/922/hfUgDL.jpg) (https://imageshack.com/i/pmhfUgDLj)

While I was at it I had a Kubelwagen that came as a free 'extra' with a Dragon PzIV, so finished that off too.

(https://imagizer.imageshack.com/v2/1024x768q70/924/E159AF.jpg) (https://imageshack.com/i/poE159AFj)
Title: Re: Tactical Painter's Second World War in 20mm (updated 14 03 23)
Post by: Shahbahraz on March 14, 2023, 07:01:44 AM
I do really like the bus. It's exactly right for the narrative, and looks like a cracking build.
Title: Re: Tactical Painter's Second World War in 20mm (updated 14 03 23)
Post by: Marine0846 on March 14, 2023, 02:39:11 PM
Very nicely painted.
Look forward to seeing in one of the up coming battles.
Title: Re: Tactical Painter's Second World War in 20mm (updated 14 03 23)
Post by: TacticalPainter on March 21, 2023, 07:47:45 AM
The Ruckzug campaign continues to drive the completion of a few outstanding projects. The British may need a little more help in the way of high explosive and so I thought I'd better provide Dave, my opponent, with more options. The first is a Sexton. This is resin and I can't recall who makes it. It's not the cleanest casting I've seen and at first I was very unimpressed but it's amazing what a coat of paint can do. Also, before anyone asks, no I am not basing my vehicles - this resin cast comes complete with base and it's far too much effort to remove it. The crew are a few spare Plastic Soldier Company figures although at some stage I'd like to upgrade them with something from AB.

(https://imagizer.imageshack.com/v2/1024x768q70/923/xgMlkM.jpg) (https://imageshack.com/i/pnxgMlkMj)

(https://imagizer.imageshack.com/v2/1024x768q70/922/1cfvdl.jpg) (https://imageshack.com/i/pm1cfvdlj)

(https://imagizer.imageshack.com/v2/1024x768q70/923/ZrLXDu.jpg) (https://imageshack.com/i/pnZrLXDuj)

Secondly there is a Bofors 40mm gun. In the later stages of the war this often saw service in a ground support role. That said, the crew are from AB and as you might expect for a crew from an 'AA' gun, they are looking skyward! The gun itself is the old Airfix kit.

(https://imagizer.imageshack.com/v2/1024x768q70/922/urLHT2.jpg) (https://imageshack.com/i/pmurLHT2j)

(https://imagizer.imageshack.com/v2/1024x768q70/923/xEwBub.jpg) (https://imageshack.com/i/pnxEwBubj)

I also have one for my Americans but in this case the gun is a Zvezda kit.

(https://imagizer.imageshack.com/v2/1024x768q70/923/QbfIvH.jpg) (https://imageshack.com/i/pnQbfIvHj)
Title: Re: Tactical Painter's Second World War in 20mm (updated 21 03 23)
Post by: Shahbahraz on March 21, 2023, 10:22:38 AM
Very nice, not sure I know any 20mm manufacturers who do cast on bases, I would be sticking that thing on the belt sander :)

Now enough painting, more playing!   :D
Title: Re: Tactical Painter's Second World War in 20mm (updated 21 03 23)
Post by: Seb on March 21, 2023, 01:26:18 PM
Great job!
Title: Re: Tactical Painter's Second World War in 20mm (updated 21 03 23)
Post by: Fire-at-Will on March 21, 2023, 08:16:24 PM
Very nice, not sure I know any 20mm manufacturers who do cast on bases, I would be sticking that thing on the belt sander :)

Now enough painting, more playing!   :D

Ready to Roll and in the past Minimi
Title: Re: Tactical Painter's Second World War in 20mm (updated 21 03 23)
Post by: TacticalPainter on March 21, 2023, 09:45:09 PM
Ready to Roll and in the past Minimi


Ah thanks, that’s it, it’s a Ready to Roll.
Title: Re: Tactical Painter's Second World War in 20mm (updated 21 03 23)
Post by: Golgotha on March 22, 2023, 07:36:50 PM
Love the bus that is awesome and really good to see something a little different. You need a chap working on the engine with his head under the hood. Maybe his sleeves rolled up and showing some grease on his arms...
Title: Re: Tactical Painter's Second World War in 20mm (updated 21 03 23)
Post by: TacticalPainter on March 30, 2023, 12:55:10 AM
A very quick job here. I needed a Centaur or a Cromwell IV or VI with a 95mm gun as a close support version. I had a left over Armourfast Cromwell that I had made up and was messing around with placing stowage on the back using various spares and Milliput. It was primed and ready for paint but I decided to do a rather rough and ready barrel swap using a spare 95mm barrel left over from the PSC Churchill set. The way it is mounted in the mantlet is not quite right and lacks some finesse, but I think it will do the trick.

(https://imagizer.imageshack.com/v2/1024x768q70/923/Lb53gW.jpg) (https://imageshack.com/i/pnLb53gWj)

(https://imagizer.imageshack.com/v2/1024x768q70/924/8EKNJz.jpg) (https://imageshack.com/i/po8EKNJzj)

(https://imagizer.imageshack.com/v2/1024x768q70/922/OjOzhP.jpg) (https://imageshack.com/i/pmOjOzhPj)
Title: Re: Tactical Painter's Second World War in 20mm (updated 21 03 23)
Post by: TacticalPainter on March 30, 2023, 10:40:40 PM
Love the bus that is awesome and really good to see something a little different. You need a chap working on the engine with his head under the hood. Maybe his sleeves rolled up and showing some grease on his arms...

Well, that put an idea in my head. I have a set of tank crew figures from Orion that include several in overalls. While no one is leaning into the engine I rather liked the idea of a bunch of mechanics who've given up hope of getting the bus back on the road. I painted up these three and put them on a separate base giving the option to have them there or not. It may be taking the idea of scatter terrain a bit too far, but what the heck, it looks good!

(https://imagizer.imageshack.com/v2/1024x768q70/922/nWQXKs.jpg) (https://imageshack.com/i/pmnWQXKsj)

(https://imagizer.imageshack.com/v2/1024x768q70/922/nkFd53.jpg) (https://imageshack.com/i/pmnkFd53j)

(https://imagizer.imageshack.com/v2/1024x768q70/922/Ynd7BT.jpg) (https://imageshack.com/i/pmYnd7BTj)

(https://imagizer.imageshack.com/v2/1024x768q70/923/BSlR8z.jpg) (https://imageshack.com/i/pnBSlR8zj)
Title: Re: Tactical Painter's Second World War in 20mm (updated 31 03 23)
Post by: Shahbahraz on March 30, 2023, 10:58:34 PM
Oh, those are perfect... lovely figures, painting and posing.
Title: Re: Tactical Painter's Second World War in 20mm (updated 31 03 23)
Post by: Grumpy Gnome on March 31, 2023, 09:11:38 AM
As always, brilliantly inspirational work! 👏🏻
Title: Re: Tactical Painter's Second World War in 20mm (updated 31 03 23)
Post by: Digits on March 31, 2023, 09:29:45 AM
Scatter terrain tells a story adding a lush backdrop to any Wargames table….those are perfect….if a little relaxed once the bullets start flying! Lol

Excellent work.

…and now I want a bus!
Title: Re: Tactical Painter's Second World War in 20mm (updated 31 03 23)
Post by: TacticalPainter on March 31, 2023, 09:52:05 PM
Scatter terrain tells a story adding a lush backdrop to any Wargames table….those are perfect….if a little relaxed once the bullets start flying!

Indeed. That’s one reason I have them on a separate base, depends on the circumstances. I used this in our Ruckzug game yesterday, we started with the mechanics there but once the British showed up off they went!
Title: Re: Tactical Painter's Second World War in 20mm (updated 31 03 23)
Post by: Digits on April 01, 2023, 08:37:41 AM
Maybe you need some running chaps next! 😉

Keep it coming!
Title: Re: Tactical Painter's Second World War in 20mm (updated 31 03 23)
Post by: forrester on April 01, 2023, 08:49:21 AM
I like the mechanics. I used the same set to populate the diecast half track repair vehicle I got a few years ago
Title: Re: Tactical Painter's Second World War in 20mm (updated 31 03 23)
Post by: TacticalPainter on May 08, 2023, 12:14:20 AM
While I haven't been making much in 20mm for the Second World War the good news (for me at least) is that I have been playing a lot. I've been posting updates in a separate thread here on LAF about our Ruckzug campaign, but I've also introduced a new player to CoC and we've been playing the Kampfgruppe Von Luck campaign.

In one of those games the Germans had a Lorraine Schlepper and the 150mm gun managed to collapse a building. As we had to replay on that table due to a German defeat I needed to substitute the building for a ruin. I have a few but none that would fit the footprint for this particular table. As you can never have enough ruins (or trees, it seems) I thought I'd do a quick scratch build that matched the footprint exactly.

Using foam core, coffee stirrers, cat litter and all the usual bits and pieces for this sort of build I made the ruins including a detachable bit of rubble so that I can keep it versatile.

(https://imagizer.imageshack.com/v2/xq70/923/5rlGVQ.jpg) (https://imageshack.com/i/pn5rlGVQj)

(https://imagizer.imageshack.com/v2/xq70/923/hQqn3D.jpg) (https://imageshack.com/i/pnhQqn3Dj)

I then painted it up to match the colour palette of the building that was destroyed.

(https://imagizer.imageshack.com/v2/xq70/923/yuAnuR.jpg) (https://imageshack.com/i/pnyuAnuRj)

(https://imagizer.imageshack.com/v2/xq70/923/qMxN3f.jpg) (https://imageshack.com/i/pnqMxN3fj)

As it happened the Germans failed to take this table at the second attempt too which entailed a third game, so the ruins were well worth the effort.

(https://imagizer.imageshack.com/v2/xq70/923/Ku9Tyt.jpg) (https://imageshack.com/i/pnKu9Tytj)

Not only that, I managed to find a use for it in the fourth of our Ruckzug campaign games as well.

(https://imagizer.imageshack.com/v2/xq70/924/vdhqov.jpg) (https://imageshack.com/i/povdhqovj)
Title: Re: Tactical Painter's Second World War in 20mm (updated 08 05 23)
Post by: has.been on May 08, 2023, 06:55:50 AM
A lovely addition, & if anyone hasn't read your AARs I recommend that they do, ASAP. :)
Title: Re: Tactical Painter's Second World War in 20mm (updated 08 05 23)
Post by: TacticalPainter on June 05, 2023, 05:44:26 AM
I've added a new post on the blog as part of the ongoing project to document my 20mm Second World War collection and where possible to match the models up with the pictures I've taken of the actual vehicles in museums I've visited. This latest one cover the late war German vehicles that I have. There's too much to put in a post here, you can see it all here http://thetacticalpainter.blogspot.com/2023/06/second-world-war-late-war-german-armour.html

(https://imagizer.imageshack.com/v2/1024x768q70/922/SzsoNS.jpg) (https://imageshack.com/i/pmSzsoNSj)

(https://imagizer.imageshack.com/v2/1024x768q70/924/Pk0KWc.jpg) (https://imageshack.com/i/poPk0KWcj)

(https://imagizer.imageshack.com/v2/1024x768q70/922/RMQraG.jpg) (https://imageshack.com/i/pmRMQraGj)
Title: Re: Tactical Painter's Second World War in 20mm (updated 05 06 23)
Post by: CapnJim on June 06, 2023, 05:35:24 PM
Ooh! Ooh! Tanks!  Just lovely!
Title: Re: Tactical Painter's Second World War in 20mm (updated 05 06 23)
Post by: TacticalPainter on June 11, 2023, 08:51:12 AM
While recently doing a reorganisation of my hobby space and in particular my boxes of spares I realised I had several surplus figures that might work well theming jump-off-points for Chain of Command. Here’s a few of them and I’ve put together a blog post on the process which you can find here: http://thetacticalpainter.blogspot.com/2023/06/new-jump-off-points-for-chain-of-command.html

Figures are a mix of plastic and metal from several different ranges:

(https://imagizer.imageshack.com/v2/1280x1024q70/924/pHu7Cv.jpg) (https://imageshack.com/i/popHu7Cvj)

(https://imagizer.imageshack.com/v2/1280x1024q70/924/mAO8bZ.jpg) (https://imageshack.com/i/pomAO8bZj)

(https://imagizer.imageshack.com/v2/1280x1024q70/922/iXDWQ8.jpg) (https://imageshack.com/i/pmiXDWQ8j)
Title: Re: Tactical Painter's Second World War in 20mm (updated 11 06 23)
Post by: Grumpy Gnome on June 11, 2023, 09:29:12 AM
Excellent narrative elements to those mate.
Title: Re: Tactical Painter's Second World War in 20mm (updated 11 06 23)
Post by: Mindenbrush on June 11, 2023, 01:36:31 PM
Nice idea and it does give the opportunity to use figures that are normally consigned to the “what do I use these for” box.
Title: Re: Tactical Painter's Second World War in 20mm (updated 11 06 23)
Post by: TacticalPainter on June 19, 2023, 03:24:01 AM
This Sarissa large factory (20mm version) has been a project I've been wanting to do for a while, finally got around to it and posted a separate thread about it here in the forum.

(https://imagizer.imageshack.com/v2/1024x768q70/923/nlmeTd.jpg) (https://imageshack.com/i/pnnlmeTdj)

(https://imagizer.imageshack.com/v2/1024x768q70/924/OXb9Wq.jpg) (https://imageshack.com/i/poOXb9Wqj)
Title: Re: Tactical Painter's Second World War in 20mm (updated 19 06 23)
Post by: Seb on June 19, 2023, 07:33:55 AM
Lovey factory!

I will need to borrow your idea for the jump-off-points, that's a very cleaver idea :)

Cheers,
Seb
Title: Re: Tactical Painter's Second World War in 20mm (updated 19 06 23)
Post by: TacticalPainter on June 23, 2023, 07:42:43 AM
I painted an AB Figures SS Pak40 crew when I first painted the SS platoon but they were evicted from their base when I needed a normal Heer crew to man the gun for a campaign. I've been meaning to fix that and part of the project that led to the extra jump off points was to do that.

This is the AB crew with a Zvezda Pak40. For the price I find all the Zvezda guns well detailed and certainly good enough for the game table.

(https://imagizer.imageshack.com/v2/xq70/922/0clRd7.jpg) (https://imageshack.com/i/pm0clRd7j)

(https://imagizer.imageshack.com/v2/xq70/922/A5iJTw.jpg) (https://imageshack.com/i/pmA5iJTwj)
Title: Re: Tactical Painter's Second World War in 20mm (updated 23 06 23)
Post by: CapnJim on June 23, 2023, 09:03:42 PM
Like that gun.  Well done, lad!
Title: Re: Tactical Painter's Second World War in 20mm (updated 23 06 23)
Post by: wrgmr1 on June 24, 2023, 01:02:20 AM
I just found you here TP! Thomas Moore here.
I'm not on LAF much.

Some beautiful work here. I see you use a different paint scheme for the British/Commonwealth vehicles and US ones. You must have an airbrush as there are some wonderful color variations.
Title: Re: Tactical Painter's Second World War in 20mm (updated 23 06 23)
Post by: Gunner Dunbar on June 24, 2023, 01:10:48 AM
Great thread, you do really nice work.
Title: Re: Tactical Painter's Second World War in 20mm (updated 23 06 23)
Post by: TacticalPainter on June 24, 2023, 04:40:36 AM
I just found you here TP! Thomas Moore here.
I'm not on LAF much.

Some beautiful work here. I see you use a different paint scheme for the British/Commonwealth vehicles and US ones. You must have an airbrush as there are some wonderful color variations.

Hi Thomas, good to see you here. Yes, I do indeed have an airbrush!
Title: Re: Tactical Painter's Second World War in 20mm (updated 23 06 23)
Post by: wrgmr1 on June 30, 2023, 08:00:34 PM
Quote
Hi Thomas, good to see you here. Yes, I do indeed have an airbrush!

One day I will have the space for one.
Title: Re: Tactical Painter's Second World War in 20mm (updated 23 06 23)
Post by: TacticalPainter on July 03, 2023, 09:24:27 AM
A little project in preparation for the Operation Martlet campaign for Chain of Command. Found a use for a spare PzIV for a slightly indulgent terrain project that will work well for the campaign. Full details of the build in a blog post here http://thetacticalpainter.blogspot.com/2023/07/dug-in-pzivh.html

(https://imagizer.imageshack.com/v2/xq70/923/WAWVol.jpg) (https://imageshack.com/i/pnWAWVolj)

(https://imagizer.imageshack.com/v2/xq70/923/az4stl.jpg) (https://imageshack.com/i/pnaz4stlj)

(https://imagizer.imageshack.com/v2/xq70/923/2eGWxj.jpg) (https://imageshack.com/i/pn2eGWxjj)
Title: Re: Tactical Painter's Second World War in 20mm (updated 03 07 23)
Post by: Shahbahraz on July 03, 2023, 09:31:41 AM
Looks excellent, more of this kind of thing I say. Full immersion.
Title: Re: Tactical Painter's Second World War in 20mm (updated 03 07 23)
Post by: CapnJim on July 04, 2023, 10:21:08 PM
Well, that's cool.  I presume you have a whole PzKfwIV for when it backs out... ;)
Title: Re: Tactical Painter's Second World War in 20mm (updated 03 07 23)
Post by: TacticalPainter on July 04, 2023, 10:31:10 PM
Well, that's cool.  I presume you have a whole PzKfwIV for when it backs out... ;)

Haha, indeed I do, several in fact. You’ll see from the blog post that it’s because I had a spare PzIV that I was able to be this extravagant and cut one in half.
Title: Re: Tactical Painter's Second World War in 20mm (updated 03 07 23)
Post by: snitcythedog on July 04, 2023, 10:46:37 PM
Just wow.  A dug in tank that looks the part.  The next logical step would be to use some of those extra infantry that you must have lying around to make dug in markers.   lol
Title: Re: Tactical Painter's Second World War in 20mm (updated 03 07 23)
Post by: TacticalPainter on July 05, 2023, 10:17:44 AM
Just wow.  A dug in tank that looks the part.  The next logical step would be to use some of those extra infantry that you must have lying around to make dug in markers.   lol

Well, funny you should mention that……

(https://imagizer.imageshack.com/v2/1280x1024q70/923/FdAGVt.jpg) (https://imageshack.com/i/pnFdAGVtj)

More about making them here https://thetacticalpainter.blogspot.com/2020/07/making-foxholes.html
Title: Re: Tactical Painter's Second World War in 20mm (updated 03 07 23)
Post by: has.been on July 06, 2023, 09:24:15 AM
Excellent work.
have you considered using the discarded legs (with a tarp. covering the 'bodies')
as casualty markers?
Title: Re: Tactical Painter's Second World War in 20mm (updated 03 07 23)
Post by: Tom Dulski on July 06, 2023, 12:11:47 PM
Oh Man those guys in foxhole's look amazing!
Title: Re: Tactical Painter's Second World War in 20mm (updated 03 07 23)
Post by: TacticalPainter on August 11, 2023, 01:32:53 PM
Quite a bit of terrain building happening at the moment. For the Operation Martlet campaign for Chain of Command I've made a few new bits of Normandy terrain. These two farm buildings are MDF models from Sarissa. The first is Decoster's House and while it's intended for the early 19th century it works well right through to the 20th:

(https://imagizer.imageshack.com/v2/xq70/923/qFxYa9.jpg) (https://imageshack.com/i/pnqFxYa9j)

(https://imagizer.imageshack.com/v2/xq70/923/7dOXoK.jpg) (https://imageshack.com/i/pn7dOXoKj)

This second one is the same. It's part of the Haye Sainte farm but would work as a stable across several centuries:

(https://imagizer.imageshack.com/v2/xq70/922/zE4Hs1.jpg) (https://imageshack.com/i/pmzE4Hs1j)

(https://imagizer.imageshack.com/v2/xq70/922/qYX3ZM.jpg) (https://imageshack.com/i/pmqYX3ZMj)

I scratch built a base and some walls so that I could make up a walled farm compound but keep the buildings free for other uses. It uses the Sarissa Decoster's House and a barn from Charlie Foxtrot:

(https://imagizer.imageshack.com/v2/xq70/922/9yZ7pz.jpg) (https://imageshack.com/i/pm9yZ7pzj)

(https://imagizer.imageshack.com/v2/xq70/924/70T7yA.jpg) (https://imageshack.com/i/po70T7yAj)

(https://imagizer.imageshack.com/v2/xq70/923/LfBYjl.jpg) (https://imageshack.com/i/pnLfBYjlj)
Title: Re: Tactical Painter's Second World War in 20mm (updated 03 07 23)
Post by: TacticalPainter on August 11, 2023, 01:35:14 PM
A few other pieces for France. Both of these are 3D prints from Sabotag3D. A calvary, which features in the first map for the Martlet campaign.

(https://imagizer.imageshack.com/v2/xq70/922/QpYkmg.jpg) (https://imageshack.com/i/pmQpYkmgj)

And 10 concrete telegraph poles:

(https://imagizer.imageshack.com/v2/xq70/923/FH0NC7.jpg) (https://imageshack.com/i/pnFH0NC7j)
Title: Re: Tactical Painter's Second World War in 20mm (updated 11 08 23)
Post by: TacticalPainter on August 11, 2023, 01:40:51 PM
Then a complete change of theatre and something I've been meaning to do for some time - bunkers for the Japanese in the Far East. These are all scratch built using XPS foam as the core base for the shape. I made five - two for LMG teams; one slightly larger for an MMG team and another for an AT gun, and, one large bunker to house two weapons teams.

(https://imagizer.imageshack.com/v2/xq70/923/7pIMC9.jpg) (https://imageshack.com/i/pn7pIMC9j)

(https://imagizer.imageshack.com/v2/xq70/924/7rjhjW.jpg) (https://imageshack.com/i/po7rjhjWj)

(https://imagizer.imageshack.com/v2/xq70/924/p2KvFJ.jpg)
 (https://imageshack.com/i/pop2KvFJj)

(https://imagizer.imageshack.com/v2/xq70/924/CSTPKT.jpg) (https://imageshack.com/i/poCSTPKTj)

(https://imagizer.imageshack.com/v2/xq70/924/OIwSc1.jpg) (https://imageshack.com/i/poOIwSc1j)
Title: Re: Tactical Painter's Second World War in 20mm (updated 11 08 23)
Post by: Mindenbrush on August 12, 2023, 01:01:07 PM
Nicely done 👍.
Just ordered the CoC dashboards and the drinks cabinet from Sabotag3d.
Title: Re: Tactical Painter's Second World War in 20mm (updated 11 08 23)
Post by: CapnJim on August 12, 2023, 05:52:39 PM
Lovely terrain bits there.  Love that crucifix...
Title: Re: Tactical Painter's Second World War in 20mm (updated 11 08 23)
Post by: .:Gunslinger:. on August 14, 2023, 06:30:54 AM
Lovely new additions to your terrain collection! The details like the telegraph poles will still enhance your beautiful set-ups! I particularly like the japanese bunkers, very effective. Also really impressed how your basing works well for différent theaters, I mean except for the banana leaves and maybe a bit of longer static grass, the basing looks the same between Normandy and the Pacific, but it works well in both cases - very efficient!
Title: Re: Tactical Painter's Second World War in 20mm (updated 11 08 23)
Post by: TacticalPainter on September 12, 2023, 05:19:55 AM
Keeping with the Far East theme of the bunkers I've added a few wheeled vehicles to the Japanese.

First up an Austin MkIV from MasterBox. This one comes with decals for the Japanese, simple as they are. Not sure how much service these saw beyond the 1930s but the Japanese made a lot of use of armoured cars in China.

(https://imagizer.imageshack.com/v2/xq70/922/jpvTGF.jpg) (https://imageshack.com/i/pmjpvTGFj)

(https://imagizer.imageshack.com/v2/xq70/922/ZKAwsV.jpg) (https://imageshack.com/i/pmZKAwsVj)

Hasegawa make this nice Isuzu petrol tanker which comes with a trolley and a handful of oil drums:

(https://imagizer.imageshack.com/v2/xq70/923/bNMOJR.jpg) (https://imageshack.com/i/pnbNMOJRj)

IBG do a range of soft skins for various nationalities and I picked up one of their Isuzu trucks. It comes with an engine and so I decided to make the most of that and so it's a broken down version. Should make for a good bitter of scatter terrain.

(https://imagizer.imageshack.com/v2/xq70/923/CNT9oL.jpg) (https://imageshack.com/i/pnCNT9oLj)

(https://imagizer.imageshack.com/v2/xq70/923/6VuxEi.jpg) (https://imageshack.com/i/pn6VuxEij)

Last but not least is the diminutive Kurogane car, this one a resin cast from 172 Scale Miniatures. It's not the finest model in the collection and doesn't bear too close inspection but it looks the part. Only found out recently that this was the first four wheel drive utility car in any army in the world.

(https://imagizer.imageshack.com/v2/xq70/924/wbC2qZ.jpg) (https://imageshack.com/i/powbC2qZj)

(https://imagizer.imageshack.com/v2/xq70/924/asj42h.jpg) (https://imageshack.com/i/poasj42hj)

Some useful additions for the Far East.

(https://imagizer.imageshack.com/v2/xq70/923/JGYJWh.jpg) (https://imageshack.com/i/pnJGYJWhj)
Title: Re: Tactical Painter's Second World War in 20mm (updated 12 09 23)
Post by: Shahbahraz on September 12, 2023, 07:35:33 AM
Very nice indeed. Interested to know what colours you used, as those have turned out well?
Title: Re: Tactical Painter's Second World War in 20mm (updated 12 09 23)
Post by: TacticalPainter on September 12, 2023, 07:49:47 AM
Thanks. I used Tamiya Khaki as the base colour and lightened it with Tamiya Buff. Glad you like it, I think it works well.
Title: Re: Tactical Painter's Second World War in 20mm (updated 12 09 23)
Post by: Shahbahraz on September 12, 2023, 10:36:08 PM
It does work well. Interesting,  it looks a bit greener than I would have expected from Khaki and Buff.
Title: Re: Tactical Painter's Second World War in 20mm (updated 12 09 23)
Post by: CapnJim on September 13, 2023, 12:01:44 AM
I like those vehicles.  They look really good!
Title: Re: Tactical Painter's Second World War in 20mm (updated 12 09 23)
Post by: TacticalPainter on September 28, 2023, 07:37:15 AM
Following on from the Japanese bunkers I posted earlier I've now added spider holes as individual weapon pits. These are from a set from 172 Scale Miniatures and all I've done is added slightly larger bases. I've put together a longer blog post on the bunkers and these which you can find here http://thetacticalpainter.blogspot.com/2023/09/bunkers-spider-holes-and-soft-skins-for.html

(https://imagizer.imageshack.com/v2/xq70/922/SchZmU.jpg) (https://imageshack.com/i/pmSchZmUj)

(https://imagizer.imageshack.com/v2/xq70/922/GCE8jK.jpg) (https://imageshack.com/i/pmGCE8jKj)

(https://imagizer.imageshack.com/v2/xq70/924/aMGEgi.jpg) (https://imageshack.com/i/poaMGEgij)
Title: Re: Tactical Painter's Second World War in 20mm (updated 28 09 23)
Post by: Seb on September 28, 2023, 12:20:18 PM
Noice! :)

Great work. By the way, your CoC are amazing! :D

Cheers,
Seb
Title: Re: Tactical Painter's Second World War in 20mm (updated 28 09 23)
Post by: Ragnar on September 30, 2023, 11:35:51 AM
So many great ideas in this thread.  Love the Japanese defences.
Title: Re: Tactical Painter's Second World War in 20mm (updated 28 09 23)
Post by: TacticalPainter on October 08, 2023, 11:20:08 PM
Introducing a new player to Chain of Command and playing the Storming the Citadel campaign set during Kursk. It’s been the inspiration to getting around to finishing off some Russian AB Figures. Over time I’ve been replacing the plastic figures from PSC that I used when I first came back to miniatures. Nothing wrong with those figures per se and they’ve served me well, but you know, AB Figures are just….better.

(https://imagizer.imageshack.com/v2/1280x1024q70/924/wRnsCm.jpg) (https://imageshack.com/i/powRnsCmj)

(https://imagizer.imageshack.com/v2/1280x1024q70/924/HR3GuR.jpg) (https://imageshack.com/i/poHR3GuRj)

(https://imagizer.imageshack.com/v2/1280x1024q70/922/RmNy7m.jpg) (https://imageshack.com/i/pmRmNy7mj)

(https://imagizer.imageshack.com/v2/1280x1024q70/923/F4GRxh.jpg) (https://imageshack.com/i/pnF4GRxhj)

Included in my order from Eureka Miniatures was this rather nice sniper, also from AB.

(https://imagizer.imageshack.com/v2/800x600q70/923/NQjJhX.jpg) (https://imageshack.com/i/pnNQjJhXj)

(https://imagizer.imageshack.com/v2/800x600q70/923/EiUuOL.jpg) (https://imageshack.com/i/pnEiUuOLj)S
Title: Re: Tactical Painter's Second World War in 20mm (updated 09 10 23)
Post by: TacticalPainter on October 26, 2023, 05:37:22 AM
If you've been following this thread you will know that the bulk of my Second World War gaming is played using Chain of Command and my figures are normally based individually. However the rules that brought me back to gaming with miniatures about ten years ago were Crossfire and after a hiatus of nearly thirty years the first miniatures I painted were Plastic Soldier Company 1/72 figures which I based on 40mm squares.

(https://imagizer.imageshack.com/v2/xq70/923/mVQ7Nv.jpg) (https://imageshack.com/i/pnmVQ7Nvj)

Once my gaming shifted to Chain of Command the Crossfire armies remained stored away. More recently I dabbled with Crossfire using the 12mm armies I'd put together for O Group. They worked well but lately the club has shown interest in playing more games in 20mm. That's inspired me to dig out the old Crossfire armies and begin refreshing them. A few at the club have based their's on 40mm round bases and I like the look of those. As part of the refresh of the old figures I decide to rebase them and to match up the basing with the urban ruins that I had originally created with Crossfire in mind but have used more often now for Chain of Command.

The first batch is finished and gives me a German company. Here they are and you can see how the new basing works well with the terrain.

(https://imagizer.imageshack.com/v2/xq70/924/KT1igQ.jpg) (https://imageshack.com/i/poKT1igQj)

(https://imagizer.imageshack.com/v2/xq70/923/hxAbia.jpg) (https://imageshack.com/i/pnhxAbiaj)

(https://imagizer.imageshack.com/v2/xq70/922/IwLVVq.jpg) (https://imageshack.com/i/pmIwLVVqj)

(https://imagizer.imageshack.com/v2/xq70/923/43h8vb.jpg) (https://imageshack.com/i/pn43h8vbj)

The Russians are next in line for the same treatment and then I hope to put on a few games set amongst the ruins.
Title: Re: Tactical Painter's Second World War in 20mm (updated 26 10 23)
Post by: MaleGriffin on October 26, 2023, 05:52:03 PM
Fantastic work! I'm stealing the half figure prepared position idea!
Title: Re: Tactical Painter's Second World War in 20mm (updated 26 10 23)
Post by: TacticalPainter on November 13, 2023, 06:11:46 AM
The Crossfire revival project continues and now it's the turn of the Russians to be rebased and have a bit of a refresh. I think one of the good things about multi-basing is that the eye is drawn to the unit rather than the individual figure, in the case of this project that's a bit of a godsend as these figures are some of the first I painted when returning to miniature gaming. They are passable, but not my finest hour!

(https://imagizer.imageshack.com/v2/xq70/923/mxdTls.jpg) (https://imageshack.com/i/pnmxdTlsj)

(https://imagizer.imageshack.com/v2/xq70/922/vgkJV8.jpg) (https://imageshack.com/i/pmvgkJV8j)

(https://imagizer.imageshack.com/v2/xq70/922/YY3RKD.jpg) (https://imageshack.com/i/pmYY3RKDj)

(https://imagizer.imageshack.com/v2/xq70/924/gxV02M.jpg) (https://imageshack.com/i/pogxV02Mj)
Title: Re: Tactical Painter's Second World War in 20mm (updated 13 11 23)
Post by: CapnJim on November 13, 2023, 05:09:52 PM
You sure do those 20mm chaps justice.  Well done!
Title: Re: Tactical Painter's Second World War in 20mm (updated 13 11 23)
Post by: Freddy on November 13, 2023, 06:01:54 PM
A great looking force for sure!
Title: Re: Tactical Painter's Second World War in 20mm (updated 13 11 23)
Post by: TacticalPainter on December 12, 2023, 10:28:57 AM
Despite many additions to existing units, it's been a little while since I added an entirely new platoon to my collection for Chain of Command. It was well over a year ago that I bought a number of Fallschirmjager. Mainly from AB Figures but I added a few more MG42 LMG teams with others from Wartime Miniatures. I seem to recall being inspired by talk of a Market Garden supplement for CoC and rumours of a few campaigns set on the Dutch/German border in late 1944/45. It was definitely time to add a Fallschirmjager platoon to the collection. It's taken a while to get them painted but they are now finished.

(https://imagizer.imageshack.com/v2/xq70/924/jb7O9V.jpg) (https://imageshack.com/i/pojb7O9Vj)

(https://imagizer.imageshack.com/v2/xq70/924/aJXaxk.jpg) (https://imageshack.com/i/poaJXaxkj)

(https://imagizer.imageshack.com/v2/xq70/923/BE6Lrq.jpg) (https://imageshack.com/i/pnBE6Lrqj)

(https://imagizer.imageshack.com/v2/xq70/924/hcUSXL.jpg) (https://imageshack.com/i/pohcUSXLj)

(https://imagizer.imageshack.com/v2/xq70/922/gnIuQd.jpg) (https://imageshack.com/i/pmgnIuQdj)
Title: Re: Tactical Painter's Second World War in 20mm (updated 12 12 23)
Post by: Shahbahraz on December 13, 2023, 02:36:45 AM
Lovely stuff. Looking forward to seeing these in a battle report sometime soon. Would also work for Carentan etc?

Title: Re: Tactical Painter's Second World War in 20mm (updated 12 12 23)
Post by: TacticalPainter on December 13, 2023, 08:00:21 PM
Lovely stuff. Looking forward to seeing these in a battle report sometime soon. Would also work for Carentan etc?

Thanks. Yes, these should be good for NW Europe and late war Eastern Front. AB do a nice set in tropical kit for Nth Africa, Sicily and Italy but I’m not going down that rabbit hole just yet!
Title: Re: Tactical Painter's Second World War in 20mm (updated 12 12 23)
Post by: Basementboy on December 14, 2023, 06:04:25 PM
They look fantastic! That camo pattern is particularly impressive for sure. Looking forward to seeing more from you! ;)
Title: Re: Tactical Painter's Second World War in 20mm (updated 12 12 23)
Post by: CapnJim on December 14, 2023, 06:50:39 PM
Great job on those Germans!
Title: Re: Tactical Painter's Second World War in 20mm (updated 12 12 23)
Post by: Norm on December 14, 2023, 07:58:20 PM
Lovely ….. as always :-)
Title: Re: Tactical Painter's Second World War in 20mm (updated 12 12 23)
Post by: TacticalPainter on January 03, 2024, 03:19:35 AM
I needed a new bridge and fancied the idea of a lift bridge (needed? Actually, no. Wanted? Yes). While MDF kits make a great starting point the tell tale features of laser cutting like sharp angles and smooth surfaces are best disguised in some way. Gave a simple lift bridge a bit of a facelift and was happy with the end result.

(https://imagizer.imageshack.com/v2/xq70/923/ch924t.jpg) (https://imageshack.com/i/pnch924tj)

(https://imagizer.imageshack.com/v2/xq70/922/cLIv1A.jpg) (https://imageshack.com/i/pmcLIv1Aj)
Title: Re: Tactical Painter's Second World War in 20mm (updated 03 01 24)
Post by: has.been on January 03, 2024, 11:34:57 AM
Quote
(needed? Actually, no. Wanted? Yes).

In our house we don't do 'Needed', just 'Wanted'
My wife doesn't NEED any more handbags &
I certainly do not NEED any more Wargames stuff.  lol lol lol

Lovely job on the bridge by the way.
Title: Re: Tactical Painter's Second World War in 20mm (updated 03 01 24)
Post by: CapnJim on January 06, 2024, 05:45:54 PM
I'm with has.been.  Only with my wife, it's cookbooks, not handbags.  And we take the same approach to buying books - me with wargames rules and scenario books, and her with cookbooks.  If they are (even vaguely) in oru areas of interest, are well-produced, and have a bunch of pretty pictures, we buy 'em.  Whether or not we actually ever use them is beside the point... :D

And great-looking bridge, by the way... :)
Title: Re: Tactical Painter's Second World War in 20mm (updated 03 01 24)
Post by: TacticalPainter on January 08, 2024, 10:04:36 AM
A few extras for the Far East. I picked up a few of the Foundry 20mm sets and the Australian weapons group really took my fancy. I liked the idea of mixing up the range of poses that I currently have which are all from Eureka, it's always good to add variety. These will also work well as Chindits for my Burma games. The set includes three Bren guns with a loader and two Vickers MGs with a loader.

(https://imagizer.imageshack.com/v2/xq70/924/IgQv9h.jpg) (https://imageshack.com/i/poIgQv9hj)

(https://imagizer.imageshack.com/v2/xq70/923/duezdC.jpg) (https://imageshack.com/i/pnduezdCj)

(https://imagizer.imageshack.com/v2/xq70/924/1aBYdG.jpg) (https://imageshack.com/i/po1aBYdGj)

When I bought the Japanese in spider holes from 172 Scale Miniatures which I posted earlier I also added a few from their Chindit range including a few leaders, a media and a radio operator.

(https://imagizer.imageshack.com/v2/xq70/922/YHoeY8.jpg) (https://imageshack.com/i/pmYHoeY8j)

They are slightly shorter than the Foundry figures, but not enough that you would really notice and otherwise mix well.

(https://imagizer.imageshack.com/v2/xq70/923/Hss3Sb.jpg) (https://imageshack.com/i/pnHss3Sbj)

And the first trial of one figure for my new project for 2024, a platoon of US Marines. He is from Eureka Miniatures and was sculpted by the same person as the Australians and Japanese. I really like the look of these and this first figure is one I received from them a year or two back as a sample in one of my orders.

(https://imagizer.imageshack.com/v2/xq70/923/Ew9omp.jpg) (https://imageshack.com/i/pnEw9ompj)

(https://imagizer.imageshack.com/v2/xq70/923/upzBii.jpg) (https://imageshack.com/i/pnupzBiij)

The rest of the Marines are in the process of being based ready for priming.

(https://imagizer.imageshack.com/v2/xq70/923/c1Tcg9.jpg) (https://imageshack.com/i/pnc1Tcg9j)
Title: Re: Tactical Painter's Second World War in 20mm (updated 08 01 24)
Post by: Shahbahraz on January 08, 2024, 10:55:55 AM
Looking good. Whats the orange stuff you are using to build up the bases?
Title: Re: Tactical Painter's Second World War in 20mm (updated 08 01 24)
Post by: TacticalPainter on January 08, 2024, 11:17:18 AM
Looking good. Whats the orange stuff you are using to build up the bases?

It’s Milliput, their cheap terracotta stuff.
Title: Re: Tactical Painter's Second World War in 20mm (updated 08 01 24)
Post by: TacticalPainter on January 30, 2024, 04:46:30 AM
When I bought the Foundry Australians I also included an order for the British NW Europe support weapon set. I was after a few more prone bren gun teams and a prone 2” mortar team. As much as I like the AB sets I have a few more standing bren and 2” mortar teams than I need. Invariably I'm looking for a prone team rather than one standing. The Foundry set also had a couple of Vickers teams which I intend to use for my Crossfire games as I was short of some of those. So a few birds killed with one stone. As always figures are nicely sculpted although I would have liked to see the helmets covered in scrim and camouflage (I tried making my own using Milliput but couldn't get them to look right and gave up).

(https://imagizer.imageshack.com/v2/xq70/923/RFG5rv.jpg) (https://imageshack.com/i/pnRFG5rvj)

(https://imagizer.imageshack.com/v2/xq70/922/9MvuOm.jpg) (https://imageshack.com/i/pm9MvuOmj)

(https://imagizer.imageshack.com/v2/xq70/922/KkeD0c.jpg) (https://imageshack.com/i/pmKkeD0cj)

(https://imagizer.imageshack.com/v2/xq70/923/H4GI9R.jpg) (https://imageshack.com/i/pnH4GI9Rj)

(https://imagizer.imageshack.com/v2/xq70/924/Z2C2E0.jpg) (https://imageshack.com/i/poZ2C2E0j)
Title: Re: Tactical Painter's Second World War in 20mm (updated 30 01 24)
Post by: z1pp132002 on January 30, 2024, 08:44:24 AM
Excellent work always nice to see 20mm and especially your contributions to the hobby. It is sad to see so many abandoning the scale for 28mm. Keep up the good work.
Title: Re: Tactical Painter's Second World War in 20mm (updated 30 01 24)
Post by: CapnJim on February 03, 2024, 06:07:27 PM
Those lads look grand!
Title: Re: Tactical Painter's Second World War in 20mm (updated 30 01 24)
Post by: TacticalPainter on February 05, 2024, 08:47:18 PM
Wrecks always make for good scatter terrain but I also have a use for them when playing our pint sized campaigns for Chain of Command. It's not uncommon to fight over a map more than once if the attack has been unsuccessful and therefore not unusual that the battlefield shows signs of earlier fighting be it wrecked vehicles or buildings. It all adds to the narrative. It was with that in mind that I made up a kit of a PzIV from Dragon as a wreck. The kit included options for open hatches and so was ideal for showing a hastily abandoned tank.

I achieved the blistered paint effect by using AK's Worn Effects fluid (although a cheap hairspray will achieve exactly the same thing).

(https://imagizer.imageshack.com/v2/xq70/922/JxYzyd.jpg) (https://imageshack.com/i/pmJxYzydj)

(https://imagizer.imageshack.com/v2/xq70/924/watmCt.jpg) (https://imageshack.com/i/powatmCtj)
Title: Re: Tactical Painter's Second World War in 20mm (updated 06 02 24)
Post by: BeneathALeadMountain on February 05, 2024, 09:01:19 PM
That is an excellent burnt out tank - wrecked vehicles are rarely seen on the tabletop but dotted around in the background a lot of period photos of combat.

Andrew
BeneathALeadMountain
Title: Re: Tactical Painter's Second World War in 20mm (updated 06 02 24)
Post by: Shahbahraz on February 05, 2024, 09:59:12 PM
Great stuff. Very effective looking wreck.

And I see the next episode of Martlet is up on the blog. A cracking read.
Title: Re: Tactical Painter's Second World War in 20mm (updated 06 02 24)
Post by: CapnJim on February 12, 2024, 05:55:14 PM
Nice looking KO'ed tank.  Well done!
Title: Re: Tactical Painter's Second World War in 20mm (updated 06 02 24)
Post by: has.been on February 12, 2024, 09:44:56 PM
Lovely, but a decent recovery unit should get it running again. lol
Title: Re: Tactical Painter's Second World War in 20mm (updated 06 02 24)
Post by: TacticalPainter on February 27, 2024, 06:15:00 AM
A few more projects completed, mainly with the Far East in mind. First is a D7 Armoured Bulldozer from 172 Scale Miniatures. Overall this is a nice model, however the tracks are excessively chunky and let the model down. This can serve many uses from the 79th Armoured Division (Hobart's Funnies) on D-Day through to the US Marines.

(https://imagizer.imageshack.com/v2/xq70/922/P1GK62.jpg) (https://imageshack.com/i/pmP1GK62j)

Next is a CMP truck from the Plastic Soldier Company set. This is intended for the Far East but given the colours it could quite easily find itself somewhere in Europe (that said, the crew are in tropical uniform, however it's very hard to distinguish that unless you give it a very close inspection).

(https://imagizer.imageshack.com/v2/xq70/922/BxM6Lq.jpg) (https://imageshack.com/i/pmBxM6Lqj)

Last is an Indian Patter carrier, again from 172 Scale Miniatures.

(https://imagizer.imageshack.com/v2/xq70/923/0j4BNn.jpg) (https://imageshack.com/i/pn0j4BNnj)

And here they are for a group photo to give an indication of relative size:

(https://imagizer.imageshack.com/v2/xq70/922/JOGbFO.jpg) (https://imageshack.com/i/pmJOGbFOj)



Title: Re: Tactical Painter's Second World War in 20mm (updated 27 02 24)
Post by: CapnJim on March 04, 2024, 05:01:08 PM
I like that dozer.  When I was a kid, my next door neighbor told me he drove one of those things ashore in the first wave at Okinawa as a SeaBee...
Title: Re: Tactical Painter's Second World War in 20mm (updated 27 02 24)
Post by: jon_1066 on March 05, 2024, 12:34:44 PM
Great work as always.  Can I ask a quick question?

What in game purpose would a truck have?  Sounds daft I know but isn't a truck to get you somewhere close to the start line and then you walk the rest of the way.  ie once bullets are flying that truck should be nowhere near the front line.  I see so many transport vehicles people build that by rights shouldn't be on the board but they presumably feature in various rulesets.  I could see some scenario specific use for it (eg ambush type scenario or someone got lost) but their shear ubiquity makes me think I'm missing something.

Title: Re: Tactical Painter's Second World War in 20mm (updated 27 02 24)
Post by: TacticalPainter on March 13, 2024, 10:49:04 PM
Great work as always.  Can I ask a quick question?

What in game purpose would a truck have?  Sounds daft I know but isn't a truck to get you somewhere close to the start line and then you walk the rest of the way.  ie once bullets are flying that truck should be nowhere near the front line.  I see so many transport vehicles people build that by rights shouldn't be on the board but they presumably feature in various rulesets.  I could see some scenario specific use for it (eg ambush type scenario or someone got lost) but their shear ubiquity makes me think I'm missing something.

Sorry for not replying sooner, I’ve just seen this. I’m with you to some degree, in a normal combat situation the trucks shouldn’t appear. For me the main purpose is scenario specific. In the case of the Far East I see potential use of British trucks for retreat/breakout scenarios during the retreats in Malaya and Burma. For the Japanese I see them as potential targets for Chindits.

We recently played the Ruckzug campaign for chain of command. The chances of a successful German withdrawal is greatly increased by their trucks. While they don’t need to actually appear on the table (their primary function is abstracted and determines how many units transition successfully to the next map) we placed them at the rear of the table as scatter terrain to add to the narrative.

(https://imagizer.imageshack.com/v2/xq70/923/nMrCA0.jpg) (https://imageshack.com/i/pnnMrCA0j)

Title: Re: Tactical Painter's Second World War in 20mm (updated 27 02 24)
Post by: TacticalPainter on March 16, 2024, 04:46:57 AM
Once we complete the Operation Martlet campaign for Chain of Command we will move onto the Scottish Corridor and for that campaign the British will be on the defensive. It made me realise that I don't have as many defensive poses for my British as I would like and it just so happens that when I was perusing the Eureka Miniatures stand at CanCon this year there were sets of AB British in defensive poses for sale. How could I resist?

Lovely figures as always and a useful addition that should see action in the coming weeks.

(https://imagizer.imageshack.com/v2/xq70/922/AMk7xD.jpg) (https://imageshack.com/i/pmAMk7xDj)

(https://imagizer.imageshack.com/v2/xq70/923/frno27.jpg) (https://imageshack.com/i/pnfrno27j)

(https://imagizer.imageshack.com/v2/xq70/923/DAXIv4.jpg) (https://imageshack.com/i/pnDAXIv4j)

(https://imagizer.imageshack.com/v2/xq70/924/cXLh6h.jpg) (https://imageshack.com/i/pocXLh6hj)

(https://imagizer.imageshack.com/v2/xq70/922/HkgliH.jpg) (https://imageshack.com/i/pmHkgliHj)

(https://imagizer.imageshack.com/v2/xq70/923/oPR996.jpg) (https://imageshack.com/i/pnoPR996j)
Title: Re: Tactical Painter's Second World War in 20mm (updated 16 03 24)
Post by: has.been on March 16, 2024, 05:54:41 AM
Lovely paint job, as usual. I look forward to seeing them in an AAR.
Title: Re: Tactical Painter's Second World War in 20mm (updated 16 03 24)
Post by: CapnJim on March 16, 2024, 08:46:04 PM
Lovely paint job, as usual. I look forward to seeing them in an AAR.

What he said...  :D
Title: Re: Tactical Painter's Second World War in 20mm (updated 16 03 24)
Post by: TacticalPainter on March 25, 2024, 12:36:26 AM
Another of the very useful 20mm sets from Wargames Foundry. This time a set of German support weapons. This fills one small gap in particular- a 50mm mortar with a crew in mid to late war uniforms. While the mortar was little used as the war progressed there are games in 42-43 where they can still appear in the order of battle or as support choices.

(https://imagizer.imageshack.com/v2/xq70/923/NqBEZ0.jpg) (https://imageshack.com/i/pnNqBEZ0j)

The figures carrying ammo for the MG34/42 are also handy as extra crew figures for the MMG/HMG version. As previously, all nice sculpts.

(https://imagizer.imageshack.com/v2/xq70/922/cCUJOT.jpg) (https://imageshack.com/i/pmcCUJOTj)

(https://imagizer.imageshack.com/v2/xq70/923/X9sCVs.jpg) (https://imageshack.com/i/pnX9sCVsj)

(https://imagizer.imageshack.com/v2/xq70/923/cpKoLV.jpg) (https://imageshack.com/i/pncpKoLVj)
Title: Re: Tactical Painter's Second World War in 20mm (updated 25 03 24)
Post by: bluewillow on March 26, 2024, 07:55:35 AM
They look fabulous, nice paint work.

I really like the 1940 Foundry stuff, the 50mm mortar is an excellent piece and often forgotten piece of kit.

Cheers
Matt
Title: Re: Tactical Painter's Second World War in 20mm (updated 25 03 24)
Post by: arshak on March 26, 2024, 01:20:43 PM
very nicely painted troops, I am always admired by the care that you manage to put in every aspect, especially (but not only) the visual one, from figures to vehicles to terrain, really inspiring.
Title: Re: Tactical Painter's Second World War in 20mm (updated 25 03 24)
Post by: TacticalPainter on March 26, 2024, 10:28:48 PM
very nicely painted troops, I am always admired by the care that you manage to put in every aspect, especially (but not only) the visual one, from figures to vehicles to terrain, really inspiring.

Thank you, that’s very nice of you to say so. What draws me to miniature gaming is the visual aspect, so those things are important to me. I only returned to miniature gaming about 10 years ago after playing historical board games for 25 years. I worry much less about the visual aspect with board games (as long as the game is good), but it matters a lot if I’m playing with miniatures, otherwise, what’s the point?
Title: Re: Tactical Painter's Second World War in 20mm (updated 25 03 24)
Post by: TacticalPainter on April 17, 2024, 07:15:22 AM
Made a fair bit of progress with the US Marines, my first new project for the year. I've painted up the first platoon and they are just waiting for varnishing and final work on the base. In the meantime I've been working on a few LVTs and an M4a3. I've used a colour scheme inspired by a set of Star Decals and these are schemes used on Iwo Jima or Okinawa.

The LVTs are all from 172 Scale Miniatures. They are not overly detailed and a bit chunky in parts but from playing distance I think they look the part.

(https://imagizer.imageshack.com/v2/xq70/924/PkA4td.jpg) (https://imageshack.com/i/poPkA4tdj)

(https://imagizer.imageshack.com/v2/xq70/923/t4jgdh.jpg) (https://imageshack.com/i/pnt4jgdhj)

(https://imagizer.imageshack.com/v2/xq70/924/j32PZt.jpg) (https://imageshack.com/i/poj32PZtj)

(https://imagizer.imageshack.com/v2/xq70/922/JHBCKP.jpg) (https://imageshack.com/i/pmJHBCKPj)

(https://imagizer.imageshack.com/v2/xq70/923/ixXOop.jpg) (https://imageshack.com/i/pnixXOopj)

Last is a picture of the M4a3, this is a plastic kit from Trumpeter. I didn't like the rubber band tracks much, they were too tight and needed stretching. Still not perfect, but better.

(https://imagizer.imageshack.com/v2/xq70/922/IJDNTB.jpg) (https://imageshack.com/i/pmIJDNTBj)

Title: Re: Tactical Painter's Second World War in 20mm (updated 17 pounder 04 24)
Post by: Phil Robinson on April 17, 2024, 07:52:18 AM
Very fine work there Mark. Rubber band tracks are the spawn of the devil.
Title: Re: Tactical Painter's Second World War in 20mm (updated 17 pounder 04 24)
Post by: Ragnar on April 17, 2024, 10:07:39 AM
Brilliant work there TP
Title: Re: Tactical Painter's Second World War in 20mm (updated 17 pounder 04 24)
Post by: gamer Mac on April 17, 2024, 10:35:03 AM
Nice :-* :-* :-*
Title: Re: Tactical Painter's Second World War in 20mm (updated 17 04 24)
Post by: TacticalPainter on April 20, 2024, 04:30:13 AM
The first batch of US Marines finished for the Pacific project. These are from the Eureka Miniatures 20mm range and they are lovely figures, probably my favourites of that range.

I'm surprised at the relatively small range of choices for Marines in this scale. I wanted to fill a few gaps using the Grubby range but when I put together an order worth £29 I was a little shocked to see they wanted to charge me £30 for postage. Not sure how they calculate their postage but I know for a fact that a parcel that size from UK to Australia shouldn't be more than £10, probably less. Needless to say I didn't proceed. I'll be back in England later in the year so will probably pick them up then when UK postage for the same parcel is £3.95.

(https://imagizer.imageshack.com/v2/xq70/923/zRUEPo.jpg) (https://imageshack.com/i/pnzRUEPoj)

(https://imagizer.imageshack.com/v2/xq70/924/4lbkWr.jpg) (https://imageshack.com/i/po4lbkWrj)

(https://imagizer.imageshack.com/v2/xq70/923/5rX3Rn.jpg) (https://imageshack.com/i/pn5rX3Rnj)

(https://imagizer.imageshack.com/v2/xq70/922/BOvd2A.jpg) (https://imageshack.com/i/pmBOvd2Aj)
Title: Re: Tactical Painter's Second World War in 20mm (updated 20 04 24)
Post by: Tom Dulski on April 20, 2024, 12:23:16 PM

 Those Marines look great, you nailed the color of the uniform.
Title: Re: Tactical Painter's Second World War in 20mm (updated 20 04 24)
Post by: MaleGriffin on April 20, 2024, 06:04:20 PM
Excellent! I love your colors!
Title: Re: Tactical Painter's Second World War in 20mm (updated 20 04 24)
Post by: Basementboy on April 20, 2024, 10:49:58 PM
Gorgeous stuff! I suppose these companies have to make money somehow but £20 extra charge on postage is ridiculous- hope we’ll get to see the range painted when you’re back in England ;)
Title: Re: Tactical Painter's Second World War in 20mm (updated 20 04 24)
Post by: CapnJim on April 21, 2024, 05:06:33 PM
Nice work on those Jarheads and their LVTs...
Title: Re: Tactical Painter's Second World War in 20mm (updated 20 04 24)
Post by: vodkafan on April 23, 2024, 01:13:36 AM
It's going to be really interesting to see how Chain of Command handles a small part of a beach assault.