Lead Adventure Forum

Other Stuff => Workbench => Topic started by: Prof. Dietrich Hes on August 17, 2006, 03:37:06 AM

Title: "Making a pulp board" tutorial uploaded
Post by: Prof. Dietrich Hes on August 17, 2006, 03:37:06 AM
Here is todays project for the forum.  its not done, but should be close tomorrow.  I'm going to do a bit more work tonight on it, which should be the scenery and perhaps the temple entrance. so tomorrow I can pour the water and getethe waterfall done.  Granted the start is sort of boring, but I think it is nice to see it from start to completion.

http://www.heritage-studios.com/makingapulpboard.html

*Let me know what you think and if it is useful.

**Warning, it is picture intensive

**** Bjorn, I am adding in alot of different elements from my example on this board, so you can see some of them step by step.
Title: "Making a pulp board" tutorial uploaded
Post by: Driscoles on August 17, 2006, 09:47:33 AM
Hi,

thanks for this tutorial. Iam sure the Pulp board will look great. Iam curious on the waterfall and water effects. Iam inspired and my brain is rotatin`

The results you get with your screwdriver and finger method is amazing. I will definately copy this idea.

Thanks again !

Björn
Title: "Making a pulp board" tutorial uploaded
Post by: Operator5 on August 17, 2006, 11:18:47 AM
That is amazing Steve. I didn't notice it on my read through, but how long from start to finish on this part of the work?
Title: "Making a pulp board" tutorial uploaded
Post by: Prof.Witchheimer on August 17, 2006, 11:33:52 AM
Steve, that's great, easy and good, thanks for the tutorial, i'm also going to make a new board soon and your tips are very usefull!
Title: "Making a pulp board" tutorial uploaded
Post by: PeteMurray on August 17, 2006, 03:12:28 PM
This is a great tutorial, and has given me lots of ideas (too many ideas!) for what I'd like to do on my next board.
Title: "Making a pulp board" tutorial uploaded
Post by: Prof. Dietrich Hes on August 17, 2006, 05:50:07 PM
Thanks for the compliments guys.  

Rich, I'll fix it in the tutorial, but at the point you see up to, its roughly 2 hours with working, photos, slight modifications and making the webpage.

Currently I am hitting my 3rd hour, which includes the genreal scenery bulk out, the waterfall, the tomb entrance and the drybrushing of the mountain.  I'll post another update tonight once  I get the water poured for the river.

then after that, its scenery cleanup and then to start work on the tomb inteslf.  I still have no idea what I am going to do in there yet.....any ideas?
Title: "Making a pulp board" tutorial uploaded
Post by: Prof. Dietrich Hes on August 18, 2006, 06:30:22 AM
Day 2 is up for your viewing pleasure.  

http://www.heritage-studios.com/makingapulpboard2.html

Let me know what you think
Title: "Making a pulp board" tutorial uploaded
Post by: Driscoles on August 18, 2006, 08:07:21 AM
Fantastic !
Great stuff.
Title: "Making a pulp board" tutorial uploaded
Post by: Prof.Witchheimer on August 18, 2006, 08:49:03 AM
a good piece of work, Steve, looking forward to see the final version!
Title: "Making a pulp board" tutorial uploaded
Post by: Prof. Dietrich Hes on August 18, 2006, 04:02:09 PM
thanks.

The water came out really goood except for the section by the cave.  One of the ripples looks like a scratch, so I will do something tricky there, perhaps a bridge. I also like it because the area by the waterfall is rougher than the rest of the water.  

I should have this wrapped up by this evening (Hopefully)
Title: "Making a pulp board" tutorial uploaded
Post by: Operator5 on August 18, 2006, 04:15:12 PM
Fantastic Steve. I hope you know that this board will go suddenly "missing" the next time we're at a convention together.

 :lol:
Title: "Making a pulp board" tutorial uploaded
Post by: Prof. Dietrich Hes on August 18, 2006, 04:25:48 PM
"missing" or "Purchased"....????   :D

For you and Pete the same offer applies to this as "Black Moor".  Just let me know.  

I guess we could throw LeFreys tavern in the mix as well.  I just need to order the pieces so I can finish it, but it will be ready for Fall-In.
Title: "Making a pulp board" tutorial uploaded
Post by: PeteMurray on August 18, 2006, 04:34:05 PM
These really are fantastic tutorials. Thanks especially for the water tutorial, which is something I need to attempt in the very near future.

Don't worry about Rich stealing it. By the time he shows up, I'll have put it somewhere safe. Like my basement.  :lol:

Between this, Castle Black Moor, and LeFrey's Tavern, I think I'll let you handle the Fall In scenery and just think up a scenario where they can be used!
Title: "Making a pulp board" tutorial uploaded
Post by: Prof. Dietrich Hes on August 18, 2006, 04:41:19 PM
Easy....

The adventure starts at Lefreys Tavern, where they meet a mysterious stranger who gives them a map to where the secret passage way is through the mountain.  Bad guy runs off board, while his minions fight the intrepid adventurers.

** Fight happens here **

Next scene, The "pulp" board.  Chasing the bad guy into the valley, they encounter more minions.  They must fight there way through the board, and get to the entrance in the mountain base

** Fight happens here  **

Next scene, entering "Black Moor" keep, through the basement (i.e. cell block).  Fighting off the minions to get to the master bedroom chamber where the damsel in distress, and "really" bad guy happen to be.  

**  Fight happens here **

There you go, a quick and dirty scenario that leads you through all 3 boards.

Well....  I think I now know what I need to do to the temple area :)
Title: "Making a pulp board" tutorial uploaded
Post by: Prof. Dietrich Hes on August 18, 2006, 04:44:29 PM
I jsut had an additional thought on the scenario.  If the adventurers dont get to find the "stranger" who gives him the secret way into the keep, they have to fight their way in the fornt door, which will be much harder.

And if all else fails you can "flip" the "pulp" board and have the bad guy leave the keep and wind up there top a waitng horse fo the get away.

So depending on what the characters do, it can work either way.
Title: "Making a pulp board" tutorial uploaded
Post by: PeteMurray on August 18, 2006, 05:24:27 PM
:o

Great ideas! I guess I'm ready for Fall-In!  :D