Lead Adventure Forum
Miniatures Adventure => Future Wars => Topic started by: Mad Mecha Guy on September 25, 2014, 10:23:22 AM
-
Have been adding to my Monorail range.
As a request/suggestion have done a low level track version of monorail. Tracks are at 18mm off ground instead of 68mm.
Track Supports
(https://lh4.googleusercontent.com/-Q3KKprteHkU/VCKJ9pP261I/AAAAAAAAA4c/b0q7CtKmLq4/w682-h574-no/monorail-low%2Blevel-Track%2BSupport.jpg)
Low Level Station
(https://lh5.googleusercontent.com/-Z5uitlhUDC8/VCKJ9-8uTMI/AAAAAAAAA4s/zR1Zs7B9bFI/w305-h574-no/monorail-low%2Blevel-Station.jpg)
Level Crossing
(https://lh6.googleusercontent.com/-8Mq7lzEyHtE/VCKKpwH8KkI/AAAAAAAAA5A/t3H8yhfgic4/w339-h637/monorail-low%2Blevel-level%2Bcrossing.jpg)
- Please note have made some very minor changes to level crossing design since first test cut.
Inter-Level Ramp
(https://lh4.googleusercontent.com/-8MYRaNWAs7Q/VCKJ-kh4NlI/AAAAAAAAA4w/Q6pbdLBsCm4/w314-h574-no/monorail-low%2Blevel-ramp.jpg)
Starter Pack with include:
3 x Passenger Carriages (can replace with Cargo versions)
2 x Stops - (Low raised platform 25 x 6 x 1.8cm)
3 x 45Deg Curved Rails
4 x 22.5Deg Curved Rails
11 x 20cm Straight Rails
1 x 30cm Straight Rail
2 x Level Change Ramps (approx 40cm Long at around 8 Deg angle)
2 x Sets of Level Crossing (incs some hazard lights)
plus the necessary Rail Supports
Edit: Forgot the price: £30.00 for starter pack.
I am working on Cargo Handling Stop, scratching head & other bits on whether to use a crane or rolling gantry set up.
Before I get lynched, I will be doing a 28mm version (track height 25mmish). The Ramp will have to be in 2 sections as would be too long.
Regards
Mad Mecha Guy
www.madmechaguy.co.uk (http://www.madmechaguy.co.uk)
-
Excellent (when the 28mm version arrives). :D