Lead Adventure Forum

Miniatures Adventure => Gothic Horror => Topic started by: Tinfoil knight on April 26, 2016, 09:32:55 AM

Title: 28mm puppets?
Post by: Tinfoil knight on April 26, 2016, 09:32:55 AM
Does any one have any recommendations for 28mm puppet miniatures? I'm looking at Relics and Puppet wars at the moment, trying to find what else would fit with them. I am looking to build/convert a full faction of puppet models for Malifaux's Guild.

I'm happy to convert stuff, I have some experience scratch building so I don't mind if I have to build a few weapons but I'd like to know what options are out there before I start investing.
Title: Re: 28mm puppets?
Post by: von Lucky on April 26, 2016, 10:30:58 AM
I was going to suggest Malifaux halfway through the second sentence. Had a quick look without success.

Is there a particular style you're after? There's the clockwork zombies from Eureka Miniatures:
http://www.chronofus.net/wargames/eureka/100club/fantasy/zombieclockwork.jpg

Title: Re: 28mm puppets?
Post by: Overlord on April 26, 2016, 11:15:42 AM
Not sure if they are suitable, but the Disturbia range from Monolith has some Twisted Toys in it:

http://www.monolithdesigns.co.uk/disturbia.htm

(http://www.monolithdesigns.co.uk/update110804/CM112.jpg)

Title: Re: 28mm puppets?
Post by: dinohunterpoa on April 26, 2016, 12:34:57 PM
Freebooter Miniatures:

(http://3.bp.blogspot.com/-0aX5RzPkw00/T6a5BEOgE3I/AAAAAAAALgo/bd7pZlnb0hk/s1600/FF0.JPG)

Horrorclix PUPPET MASTER:

(http://www.dragonmech.de/images/product_images/popup_images/ic063.jpg)

Title: Re: 28mm puppets?
Post by: Tinfoil knight on April 26, 2016, 01:06:50 PM
I was going to suggest Malifaux halfway through the second sentence. Had a quick look without success.

Is there a particular style you're after? There's the clockwork zombies from Eureka Miniatures:
http://www.chronofus.net/wargames/eureka/100club/fantasy/zombieclockwork.jpg



Rag dolls with buttons and stitches mostly. Rackham have a couple of suitable models in their Death familiars. A couple in their Dwarves of Mid Nor as well but they come as a package and a bit expensive for some little voodoo dolls.

I just ordered Relic's Bitanan starter set http://www.beastsofwar.com/wp-content/uploads/2013/08/Relics-Britanan-Starter-Set.jpg

That will give me 2 mounted guild guards, a few guard riflemen and I'll figure out what the leader fits with later. A blister of dogs means I'm well on the way to having a playable McGabe list.

Not sure if they are suitable, but the Disturbia range from Monolith has some Twisted Toys in it:

http://www.monolithdesigns.co.uk/disturbia.htm

(http://www.monolithdesigns.co.uk/update110804/CM112.jpg)



I saw those and the 2nd one looks great but I can't find where he would fit. He doesn't really suit any Malifaux characters. I had considered expanding the army a little to include the teddy bears some how but I'm a bit iffy there.
Title: Re: 28mm puppets?
Post by: War In 15MM on April 26, 2016, 05:49:51 PM
Are the Freebooter Miniatures 32mm?
Title: Re: 28mm puppets?
Post by: The Gray Ghost on April 26, 2016, 08:08:23 PM
Reaper came out with some stitch golems, they also have some wizards toy familiars
Frostgrave have a rag golem.
Warmachine have a ragman character
Heroclix rag doll
Title: Re: 28mm puppets?
Post by: Orctrader on April 26, 2016, 08:25:43 PM
Disturbia  - the picture is set 2.  In set 1 they have Mr Punch.

(http://smg.photobucket.com/albums/v509/orctrader/LPL/Punch.jpg)
Title: Re: 28mm puppets?
Post by: The Gray Ghost on April 26, 2016, 09:14:40 PM
(http://i1331.photobucket.com/albums/w592/leonckriser/DSCN3036_zpskyduewvp.jpg)
Disturbia, except the lady in the back
Title: Re: 28mm puppets?
Post by: dinohunterpoa on April 27, 2016, 02:44:31 AM
Are the Freebooter Miniatures 32mm?

War in 15mm, check out this LAF thread on the subject: http://leadadventureforum.com/index.php?topic=17957.0 (http://leadadventureforum.com/index.php?topic=17957.0)  ;)
Title: Re: 28mm puppets?
Post by: War In 15MM on April 27, 2016, 06:23:05 AM
dinohunterpoa, thank you. 
Title: Re: 28mm puppets?
Post by: dinohunterpoa on April 29, 2016, 04:41:15 PM
dinohunterpoa, thank you. 

War in 15MM, you're always welcome!  ;)
Title: Re: 28mm puppets?
Post by: psyberwyche on May 03, 2016, 11:41:00 AM
Dark Arts Studios do a mannequin familiar (I've got one, pretty good, and on sale right now too): http://www.dark-art-studios.co.uk/dark-art-studios_shop/index.php?main_page=product_info&cPath=5_38_39&products_id=140
Title: Re: 28mm puppets?
Post by: julesav on May 06, 2016, 10:04:39 AM
You could look at the 'Collodi' stuff from Wyrd Miniatures.
Title: Re: 28mm puppets?
Post by: Sir Barnaby Hammond-Rye on June 25, 2016, 03:08:14 AM
Recall there are some in Rackham's Confrontation range...one on stilts IIRC. There are two in my Tekumel range but they are very small being scale 6" in height or so.
Title: Re: 28mm puppets?
Post by: MagpieJono on July 10, 2016, 11:18:40 PM
Have you seen these scarecrows from Casting Room Miniatures?


http://www.castingroomminiatures.com/collections/undead/products/undead-animated-scarecrows
Title: Re: 28mm puppets?
Post by: marianas_gamer on July 10, 2016, 11:38:04 PM
Black Army Miniatures does this fellow with two puppet choices.
(http://i511.photobucket.com/albums/s360/marianas_gamer/Adamski_1024x1024_zpsrlm7gevz.jpg) (http://s511.photobucket.com/user/marianas_gamer/media/Adamski_1024x1024_zpsrlm7gevz.jpg.html)
I always have meant to get this mini. I believe the puppeteer has a revolver behind his back. I have also always wondered if he was going to shoot the puppet (I'm a hand puppet you joik! - bad movie long ago  ;D)
LB
Title: Re: 28mm puppets?
Post by: Puuka on July 21, 2016, 10:27:59 PM
There's Heroclix and horrorclix Ventriloquist.

(http://940ee6dce6677fa01d25-0f55c9129972ac85d6b1f4e703468e6b.r99.cf2.rackcdn.com/products/pictures/229901.jpg)
(http://i.ebayimg.com/00/s/MTAyMFgxMjU0/z/VmgAAOxyYSJR8w39/$T2eC16J,!zoE9s5nd0o2BR8w39PhJw~~60_35.JPG)
Title: Re: 28mm puppets?
Post by: War In 15MM on July 31, 2016, 05:54:48 AM
Brookhurst Hobbies is having a closeout sail on some of the early Malifaux metal figures.  I picked up a pack of the Wyrd Marionettes (WYR4040)... really nice figures.  I don't know how available they are but you might want to look on eBay and see if they are being sold and if you like them.
Title: Re: 28mm puppets?
Post by: dinohunterpoa on August 04, 2016, 12:47:02 AM
Tinfoil knight, a suggestion: pick up the GHK0001 - Child Vampires from West Wind, glue very small metal keys on their backs and sent against your players as "evil vampire puppet toys" (and remember the heroes that inside each mechanical puppet somehow beats an actual children's heart...)   :o

(http://www.westwindproductions.co.uk/image/cache/catalog/figures/Vampire/Kindernacht/ghk0001-800x800.jpg)