*
Welcome, Guest. Please login or register.
September 30, 2020, 02:42:53 PM

Login with username, password and session length

Donate

We Appreciate Your Support

Recent

Author Topic: Whitechapel Horror! UD 28/03 - Entire table so far (30 images)  (Read 41786 times)

Offline Silent Invader

  • Galactic Brain
  • Posts: 8336
    • http://www.ScavengeSkirmishSurvive.uk
Re: Whitechapel Horror! UD 21/01 - warehouse ‘flying’ bridge (wip)
« Reply #465 on: January 24, 2020, 12:51:18 PM »
It’s a good point and I actually sized them to fit between. Unfortunately there were restrictions:

(1) the wall hinges are set to the rear not to the centre (which I could remake albeit not quite so seamlessly)
(2) if the gates were hinged mid pillar then when opened they would eat into what is already a narrow vehicle access (it’s only just wide enough to take a hearse)
(3) I’m reluctant to increase the width of the roadway as it will reduce the space for graves etc

So my choices were

(A) mid hinged gates resulting in a too narrow roadway
(B) mid hinged gates requiring a too wide roadway
(C) rear hinged gates with optimal sized roadway

I compromised with (C)  :D


Post-apoc survivors are now at http://www.ScavengeSkirmishSurvive.uk

My LAF Gallery is HERE

Online OSHIROmodels

  • Supporting Adventurer
  • Elder God
  • *
  • Posts: 23164
  • Custom terrain a speciality.
    • Oshiro modelterrain
Re: Whitechapel Horror! UD 21/01 - warehouse ‘flying’ bridge (wip)
« Reply #466 on: January 24, 2020, 01:07:36 PM »
(D) Have them mid-pillar but have one hanging off so that they both fit  :D

Offline Silent Invader

  • Galactic Brain
  • Posts: 8336
    • http://www.ScavengeSkirmishSurvive.uk
Re: Whitechapel Horror! UD 21/01 - warehouse ‘flying’ bridge (wip)
« Reply #467 on: January 24, 2020, 01:08:23 PM »
(D) Have them mid-pillar but have one hanging off so that they both fit  :D

 lol

Offline Silent Invader

  • Galactic Brain
  • Posts: 8336
    • http://www.ScavengeSkirmishSurvive.uk
The warehouse ‘flying’ bridge now has clapboards with only roof tiling remaining to do (the roof angle is quite shallow to take minis).






Online OSHIROmodels

  • Supporting Adventurer
  • Elder God
  • *
  • Posts: 23164
  • Custom terrain a speciality.
    • Oshiro modelterrain
That works a treat  :)

Offline Ockman

  • Mastermind
  • Posts: 1568
Looking great!

Offline SABOT

  • Supporting Adventurer
  • Mastermind
  • *
  • Posts: 1670
  • " Keep Loading !"
Terrific!

Offline Silent Invader

  • Galactic Brain
  • Posts: 8336
    • http://www.ScavengeSkirmishSurvive.uk
Thanks  :D

Moving on with the church tile now

Online Malamute

  • Prince of Darkness
  • Moderator
  • Elder God
  • *
  • Posts: 17820
    • Boot Hill Miniatures
Brilliant! :-*
"These creatures do not die like the bee after the first sting, but go on age after age, feeding on the blood of the living"  - Abraham Van Helsing

Offline Silent Invader

  • Galactic Brain
  • Posts: 8336
    • http://www.ScavengeSkirmishSurvive.uk
Re: Whitechapel Horror! UD 25/01 - review of the whole board so far
« Reply #474 on: January 25, 2020, 09:02:21 PM »
Cheers Nick  :D

Before starting on the church tile, I laid everything out to see if the church tile or the overall layout needed any changes. 



These are the two small builds that I’ve yet to spec and order so as to complete phase 1, they’ll add a lean-to workshop and a row of Georgian houses.









Proposed location of the church and rectory.











I decided that an area I’d routed out from the church tile to become cobbled road would become a small graveyard.



And so it begins:



Assuming I complete phase 1 (I’m amazed I’ve stayed focussed for this long!  :o), it will comprise:

1 x police station
2 x public houses
1 x slaughterhouse (3 parts building)
1 x warehouse (2 parts building)
1 x joiners workshop
1 x silversmiths workshop
1 x physicians house
1 x brothel house
1 x seamstress house
1 x butchers
1 x hardware store
1 x grocers
1 x cemetery (entrance only)
1 x church
1 x rectory
1 x church graveyard
13 x other houses

30 locations

+ 9 manholes as spawn points for vampires
 

Online Elk101

  • Supporting Adventurer
  • Galactic Brain
  • *
  • Posts: 8974
Re: Whitechapel Horror! UD 25/01 - review of the whole board so far
« Reply #475 on: January 25, 2020, 10:11:08 PM »
Fantastic! Regarding the gates, if the hinges are set right to the back of the pier they could be set to open beyond 90 degrees, for those occasions when bigger hearses need access.

Online OSHIROmodels

  • Supporting Adventurer
  • Elder God
  • *
  • Posts: 23164
  • Custom terrain a speciality.
    • Oshiro modelterrain
Re: Whitechapel Horror! UD 25/01 - review of the whole board so far
« Reply #476 on: January 26, 2020, 12:13:13 AM »
Splendid  :o

Offline levied troop

  • Mastermind
  • Posts: 1041
Re: Whitechapel Horror! UD 25/01 - review of the whole board so far
« Reply #477 on: January 26, 2020, 07:26:19 AM »
I’m in awe of this, it’s looking like the best terrain build I’ve ever seen, it had a real feel for time and place.  Keep that focus!
The League of Gentlemen Anti Alchemists
(We Turn Gold into Lead)

Online Malamute

  • Prince of Darkness
  • Moderator
  • Elder God
  • *
  • Posts: 17820
    • Boot Hill Miniatures
Re: Whitechapel Horror! UD 25/01 - review of the whole board so far
« Reply #478 on: January 26, 2020, 05:18:51 PM »
Looks better every time we see it. :-*

And yes we’re amazed you’ve stuck with it too lol

Offline Panama

  • Scientist
  • Posts: 335
Re: Whitechapel Horror! UD 25/01 - review of the whole board so far
« Reply #479 on: January 26, 2020, 05:58:59 PM »
It might be hard for you to stick with but not so for us as this is amazing work :)

 

Related Topics

  Subject / Started by Replies Last post
3 Replies
3224 Views
Last post November 24, 2009, 11:39:20 AM
by Wirelizard
10 Replies
3163 Views
Last post May 08, 2012, 02:09:02 AM
by fluffy05
19 Replies
4239 Views
Last post July 09, 2013, 05:30:49 PM
by Momotaro
992 Replies
205776 Views
Last post May 29, 2020, 03:52:02 PM
by Captain Blood
17 Replies
11590 Views
Last post March 14, 2015, 07:16:19 AM
by OSHIROmodels