Author Topic: Probable new project... RMASG and LCT(A) (Read 20083 times)

Rich H · « **Reply #30 on:** June 22, 2019, 09:49:52 AM »

Trying to work out how to do the names so I 3d printed them

Ultravanillasmurf · « **Reply #31 on:** June 22, 2019, 12:05:02 PM »

Excellent.

Rich H · « **Reply #32 on:** June 22, 2019, 02:15:51 PM »

Porpoise ammunition sled

Ballardian · « **Reply #33 on:** June 22, 2019, 04:16:05 PM »

Great looking Centaur, very cool

SABOT · « **Reply #34 on:** June 22, 2019, 10:10:38 PM »

Great progress 👍

Rich H · « **Reply #35 on:** June 23, 2019, 10:51:30 PM »

I have been busy today

Not quite the same cornflake packet skills as Mark though

carlos marighela · « **Reply #36 on:** June 23, 2019, 11:40:55 PM »

Bloody hell! That’s impressive!

Going to be fun painting the reticule markings on the Centaurs. Pretty sure there are some good quality LCAs out there already if you want to save yourself some work. Barrage Miniatures comes to mind.

Rich H · « **Reply #37 on:** June 24, 2019, 06:48:23 AM »

Thanks!

The barrage one is pretty pricey and the cheap Sarissa is weirdly proportioned.
I'll see after the LCT is complete if I still need the LCA

Rich H · « **Reply #38 on:** June 24, 2019, 07:58:32 AM »

Found a mistake this morning I'll correct later.
The engine room access bit is wrong, but should be easy to correct.

Going to 3D print a lot of the deck fittings as it's easier than making multiple copies of things or scrach building complicated things

3d print:
Ventilators, Anchor Winch, Anchor, bollards, Life rings, life raft, 20mm Oerlikons, fuel tank, plus other bits no doubt...

Truscott Trotter · « **Reply #39 on:** June 24, 2019, 08:09:37 AM »

Very impressed as usual Rich
I managed 1 Centaur for my Commandos
I also used 1/72 decals for the turret markings with a bit of snipping they worked OK.

Rich H · « **Reply #40 on:** June 24, 2019, 08:33:15 AM »

Pics?

Ultravanillasmurf · « **Reply #41 on:** June 24, 2019, 09:24:02 AM »

That is looking good.

voltan · « **Reply #42 on:** June 24, 2019, 09:45:07 AM »

Quote from: Truscott Trotter on June 24, 2019, 08:09:37 AM

Very impressed as usual Rich
I managed 1 Centaur for my Commandos
I also used 1/72 decals for the turret markings with a bit of snipping they worked OK.

Wish I'd thought of that, took me years to get round to painting something on mine.

Rich H · « **Reply #43 on:** June 24, 2019, 12:32:57 PM »

I was going to make a jig but it's going to be painful... looked at 1/48 decals but I can get 4 centaurs worth or a centaur adn a sherman for $10 plus $7 post.
Going to go with paint I think. I'll paint th etanks in acrylic the use enamel for the markings - I can then correct them after with a bit of white spirit.

Eclaireur · « **Reply #44 on:** June 24, 2019, 02:01:33 PM »

This looks like an absolutely fantastic project!

I will be checking regularly for updates
EC

News:

Donate

We Appreciate Your Support

Recent

Author Topic: Probable new project... RMASG and LCT(A) (Read 20083 times)