Donate to the Lead Adventure Forum to keep it alive!
I've begun working on the actual terrain for the table but not at all in the way I was thinking when I originally picked up Dark Uprising. Based on the old White Dwarf Article I've started my own Hive Table. I figured between my growing obsession with Necromunda and the new Judge Dredd stuff among other things I could justify the cost of a Proxxon cutter and the time to build something just a little crazyThe whole board is going to measure out to a whopping 28 x 36 x 42" and is going to have a degree of modularity to keep things interesting. Each corner will have its own Point of interest and the first corner in question will have an elevator shaft. I have a lot of lofty ideas for this one but for now its in its infancy. For scale purposes here's a couple figures placed on the boardI've detailed a little bit more of the build process on my blog here https://gamingwithmitten.blogspot.com/2020/01/hive-city-table-1-plans-and-first.html but in general, the walkways are 60mm deep and on 1" board. the structural board is 1.5" and the height between floors is 3 inches.All this took about an evening of work. So provided I don't get bogged down too heavy into something else, this should be slow and steady progress.