Welcome, Guest. Please login or register.
July 20, 2024, 08:15:46 PM

Login with username, password and session length


We Appreciate Your Support

  • Total Posts: 1702401
  • Total Topics: 119200
  • Online Today: 617
  • Online Ever: 2235
  • (October 29, 2023, 01:32:45 AM)
Users Online


Author Topic: Black Velvet Backdrop  (Read 992 times)

Offline Fitz

  • Mad Scientist
  • Posts: 943
    • The Website of Fitz
Black Velvet Backdrop
« on: March 05, 2024, 10:27:54 PM »
I bought a piece of black furnishing velvet to try as a backdrop for photographing my models.

I've hung it off a frame at the back of my photo box, draped forward over the floor of the stage.

I have three fairly powerful daylight LED bulbs over the stage, which is just a translucent plastic storage crate. There is a mirror tile on either side to reflect some fill light back into the scene. The minis in the scene are 15mm plastic PSC early-WWII Germans.

My camera (a Nikon D3500), in common with all cameras with automated exposure controls, tends to freak out a bit when a scene is overwhelmingly dark or light. Fortunately, it has pretty easy exposure compensation controls, although finding the exact degree of over- or under-exposure is generally a matter off guesswork and trial and error.

This image has been underexposed by one stop, and though the minis look a little dark, the colour card is still a little bit washed out as the camera struggles to get the right exposure.

This one has been underexposed by two stops, and everything is pretty dark.

The velvet background is nice and black, but the white of the exposure card is perceptibly grey, and the minis are very dark. I could probably bring them out with some post-processing, but I suspect there would be a lot less faffing about involved in darkening the background of the first image than in trying to get an acceptable tonal range in the minis in the second.

Offline Fitz

  • Mad Scientist
  • Posts: 943
    • The Website of Fitz
Re: Black Velvet Backdrop
« Reply #1 on: March 06, 2024, 02:55:11 AM »

This guy, a 28mm monk from Reaper, was also underexposed by one stop to keep the dark background from making the camera blow out the highlights. But with this one, I focused the lighting much more closely on the mini, so that almost no detail from the background was picked up at all. He's been post-processed to further darken the background.

I like this effect, and I'll probably make a lot more use of it.

Offline Fitz

  • Mad Scientist
  • Posts: 943
    • The Website of Fitz
Re: Black Velvet Backdrop
« Reply #2 on: March 06, 2024, 09:30:30 PM »

This was an experiment with a modeling light setup (i.e. using light to model the surface of the subject), using a single lamp from the upper right, and a convex makeup mirror as a fill reflector.

It's probably not often that useful a lighting rig for photographing miniatures, as highlights and shadows tend to be painted in, and the lighting generally needs to be more flat and even. However, I have it in my grab-bag if I should ever need it.

Offline jamie.grinstead

  • Schoolboy
  • Posts: 9
Re: Black Velvet Backdrop
« Reply #3 on: June 27, 2024, 06:22:20 PM »
As far as I k now, standard black velvet is kind of glossy at least what I have found cheap. I finally found the solution to the maximum darkness maxx darth background. Check out them out, since they are also velvet base, but they do absorb the light


Related Topics

  Subject / Started by Replies Last post
13 Replies
Last post April 15, 2011, 02:05:28 PM
by Dr Mathias
A new backdrop

Started by Deedles « 1 2 » Old West

18 Replies
Last post December 11, 2013, 05:42:03 PM
by Gutbukkit
9 Replies
Last post April 22, 2015, 02:24:04 PM
by von Lucky
4 Replies
Last post July 28, 2020, 08:18:11 PM
by Doug ex-em4
14 Replies
Last post June 17, 2021, 08:14:18 PM
by Silent Invader