Have done some
Full Thrust Templates inspired by the design on
EmeraldCoast Skunkworks https://emeraldcoastskunkworks.wordpress.comThese are made from double layer 2mm MDF, having efect of etched on both sides. I can do single layer 2mm acrylic.
The template is 70mm across, I can reduce this size for Bases but not for the slotted template.
Have done larger templates for bigger flight stands (50, 60, 75mm core hole) & can fairly easily change the Core Shape (i.e.: the hole in middle) to other design.
It was suggested that the design, if modified, could be useful as a as bases.
(Before anyone comments, the lettering will be the right way around once cut, just a quirk with my laser where is flips image in one plane)
Can fairly easily change the Core Shape (i.e.: the hole in middle) to other designs.
With 2mm MDF was thinking £2.00 GBP per double layer template set.
For bases, if use 70mm circle (can do smaller bases) get 24 for £8.40 GBP (ie; £0.33 GBP each).
Would anyone be interested in these?
Regards
Mad Mecha Guyhttp://www.madmechaguy.co.uk