*
Welcome, Guest. Please login or register.
April 26, 2024, 01:52:02 PM

Login with username, password and session length

Donate

We Appreciate Your Support

Recent

Author Topic: Pulp Vehicles - Yesteryear repaints  (Read 11249 times)

Offline gamer Mac

  • Galactic Brain
  • Posts: 8213
Pulp Vehicles - Yesteryear repaints
« on: November 23, 2008, 11:16:02 PM »
Got some models of Yesteryear cheap off of Ebay.
I am repainting them to use in my pulp games.
Below is the before picture.


A couple of pictures of the first repaint.



Not decided whether to put the canopy on or not.
Anybody got good advice on weathering vehicles. I always end up with too much or too little. What colours/paints work best?

Offline Remington

  • Mastermind
  • Posts: 1658
  • Who? Where? Say what now?
    • The Doc's Diary
Re: Pulp Vehicles - Yesteryear repaints
« Reply #1 on: November 24, 2008, 10:09:41 AM »
Nicely done! I really like that green color. The dust and dirt on the tires looks really believable.

Now, I got myself two yesteryears as well and I was wondering if you removed the tires/wheels before you painted it. And did you spray prime it at all?

Cheers,

R

Offline Gluteus Maximus

  • Galactic Brain
  • Posts: 5427
Re: Pulp Vehicles - Yesteryear repaints
« Reply #2 on: November 24, 2008, 10:13:29 AM »
I think you have done an excellent job there. You have turned a cheap toy into a great wargames model. Your weathering looks fine to me!

Your models pass the "photo enlargement" test with flying colours  :)

Offline gamer Mac

  • Galactic Brain
  • Posts: 8213
Re: Pulp Vehicles - Yesteryear repaints
« Reply #3 on: November 24, 2008, 10:14:59 AM »
Remington
I didn't remove the tires on this one. I thought I might damage the rims, and the axle was a single piece. I did split the rest of the vehicle up into its component parts by drilling out the rivets on the bottom.
I tried just sanding it first then painting it but at the edges the paint was just flaking off the original blue gloss paint. So I then spray painted a black primer, which seemed to work well.
« Last Edit: November 24, 2008, 10:21:19 AM by gamer Mac »

Offline Malamute

  • Prince of Darkness
  • Supporting Adventurer
  • Elder God
  • *
  • Posts: 19331
    • Boot Hill Miniatures
Re: Pulp Vehicles - Yesteryear repaints
« Reply #4 on: November 24, 2008, 10:19:21 AM »
very nicely done. :)
"These creatures do not die like the bee after the first sting, but go on age after age, feeding on the blood of the living"  - Abraham Van Helsing

Offline Remington

  • Mastermind
  • Posts: 1658
  • Who? Where? Say what now?
    • The Doc's Diary
Re: Pulp Vehicles - Yesteryear repaints
« Reply #5 on: November 24, 2008, 10:46:10 AM »
Thank you for your reply.

Yiikiies, drilling out the rivers is probably a bit over my toolbox's capabilities. :) I guess I'll have to try some things out.

Again... absolutely brilliant.

Offline dampfpanzerwagon

  • Scatterbrained Genius
  • Posts: 2794
Re: Pulp Vehicles - Yesteryear repaints
« Reply #6 on: November 24, 2008, 10:55:34 AM »
I think the weathering looks just right. 

Tony
http://dampfpanzerwagon.blogspot.com/

Offline gamer Mac

  • Galactic Brain
  • Posts: 8213
Re: Pulp Vehicles - Yesteryear repaints
« Reply #7 on: November 24, 2008, 11:31:41 AM »
Thanks for the complements.
Remington
Drilling out the rivets is easy. I use a Black and Decker cordless drill with a drill bit of about 4 mm diameter. You just need to hollow out the rivet a bit then you should be able to break off the edge with a pair of pliers.

I have got another one started. But I am not sure the best way to finish it. Below is a picture of it stripped and prepared for spraying. As you can see it was originally white. It’s a very large Mercedes that I want to paint black for my pulp Germans. I have not got a photo of it sprayed but it is now matt black.

My problem is that I think it should have a gloss finish. The question is, do I high light the black before glossing or do I just go ahead and gloss over the matt black? I am not sure which will look best on a scale model.

Offline Argonor

  • Elder God
  • Posts: 11336
  • Attic Attack: Mead and Dice!
    • Argonor's Wargames
Re: Pulp Vehicles - Yesteryear repaints
« Reply #8 on: November 24, 2008, 11:52:38 AM »
I think that if you're going to use gloss varnish, you should not highlight.

I've done a lot of GW gems without adding the small white dot, and then varnished the gem - the highlight will be formed by the natural light - (and as we usually view the minis from an elevated position, the light will reflect at the upper part of the gem, as intended).
Ask at the LAF, and answer shall thy be given!


Cultist #84

Offline Johnnytodd

  • Mad Scientist
  • Posts: 627
Re: Pulp Vehicles - Yesteryear repaints
« Reply #9 on: November 24, 2008, 01:25:28 PM »
Are the "MODELS of YESTERYEAR" all the same scale?  what scale?

Offline gamer Mac

  • Galactic Brain
  • Posts: 8213
Re: Pulp Vehicles - Yesteryear repaints
« Reply #10 on: November 24, 2008, 01:32:34 PM »
Not sure what exact scale they are but they fit nice with 28 mm figures. The ones I have all appear to be the same scale.
I have a couple of sloppy Jalopy vehicles WIP. If I ever finish building them I will post a picture of them both together. It might give you an idea of the size.

Offline Remington

  • Mastermind
  • Posts: 1658
  • Who? Where? Say what now?
    • The Doc's Diary
Re: Pulp Vehicles - Yesteryear repaints
« Reply #11 on: November 24, 2008, 01:47:56 PM »
Thanks, gamer Mac. I'll give it a try.

I also would not highlight the black if you are going to use gloss varnish. When you highlight, you "emulate" shadows and shines. If you add the real shine to that from the varnish, it will only confuse the eye.

Offline Saya

  • Scientist
  • Posts: 241
Re: Pulp Vehicles - Yesteryear repaints
« Reply #12 on: November 24, 2008, 05:40:09 PM »
I recently bought two vehicles on ebay too, but Lledo, as there are scale 1 / 43. Looks very good with figures of 28mm.
Very nice paint work.
Cheers

Offline Onebigriver

  • Mastermind
  • Posts: 1856
Re: Pulp Vehicles - Yesteryear repaints
« Reply #13 on: November 24, 2008, 07:43:49 PM »
Nicely done. I was tempted to buy some Yesteryear models from a charity shop recently, there were 5 or 6 in a bag, all knackered, but the shop wanted £5 for them! I'll have to have a look on Ebay.
Waiter, my soup is giggling.

Offline theoldschool

  • Scientist
  • Posts: 439
Re: Pulp Vehicles - Yesteryear repaints
« Reply #14 on: November 24, 2008, 09:07:07 PM »
Very nice indeed. I've got a load of these but had been putting off a repaint because I couldn't work out what to do with the tyres. I hadn't thought of masking tape, but it's so obvious now.
I also picked up a couple of the Bluemoon trucks, more expsnive but lovely models.

 

Related Topics

  Subject / Started by Replies Last post
8 Replies
2323 Views
Last post September 18, 2016, 09:57:53 PM
by CarlLeyland
8 Replies
1542 Views
Last post July 07, 2017, 01:34:07 PM
by GarrisonMiniatures
88 Replies
11241 Views
Last post March 14, 2022, 11:52:28 AM
by Harry Faversham
18 Replies
2740 Views
Last post July 06, 2023, 12:43:09 AM
by AndrewBeasley
14 Replies
1835 Views
Last post February 14, 2024, 09:11:06 PM
by aliensurfer