Author Topic: STALINGRAD (Read 55001 times)

Miantanomo · « **Reply #105 on:** April 16, 2017, 09:37:57 PM »

Grand work!

alcal · « **Reply #106 on:** April 16, 2017, 11:27:30 PM »

Quote from: Admiral Benbow on April 16, 2017, 09:18:11 PM

Stunning work! Are you using lasercut walls for the factories or is this a kit?

Yes one laser cut template that I chop up for everything angled roof,also the small square windows are a template strip as well.not a kit.
Cheers AL

alcal · « **Reply #107 on:** April 17, 2017, 08:34:01 PM »

Hi guys

Ok that's the factory built that administration building was a toughy to design but happy with it now.
Next step is to destroy the factory then start the internal work and the part roofs.
Cheers AL

Lardy Rich · « **Reply #108 on:** April 18, 2017, 06:29:34 AM »

Al, what are you using to cut your MDF?

Rich

alcal · « **Reply #109 on:** April 18, 2017, 07:47:52 AM »

Quote from: Lardy Rich on April 18, 2017, 06:29:34 AM

Al, what are you using to cut your MDF?

Rich

Hi Richard

90% is cut with a `snap of blade full length with tissue paper wrapped around the end i`m holding set against a steel ruler score once properly and then its a guide to scoring several more times for 3mm MDF for 2mm MDF I also get away with using a scalpel .Once cut light quick sand on flat surface with a block both sides and edge .All lines are either tape and ruler measured or using a square.

Cheers AL

I do have a TCT pull saw in the leanto but don't use it much.

Cheers AL

tomrommel1 · « **Reply #110 on:** April 18, 2017, 10:08:35 AM »

very nice progress

alcal · « **Reply #111 on:** April 19, 2017, 10:18:38 AM »

Quote from: Kelgtar on March 27, 2017, 01:14:27 PM

which size(s) did you use?

Sorry don't think I answered this one , I used the 600mm x600mm x 50mm blue Styrofoam 6 to a pack due to thickness and I ordered two packs for a 6`x 8` overall board.
Cheers AL

alcal · « **Reply #112 on:** April 20, 2017, 08:42:54 PM »

All external brickwork added , extra sewage outlet/damage added.
Cheers AL

Mattias · « **Reply #113 on:** April 20, 2017, 10:10:56 PM »

It's such a treat to follow this project. Spectacular. And fast! /Mattias

alcal · « **Reply #114 on:** April 25, 2017, 08:08:16 PM »

Chimneys have more work to be done on them yet .
Cheers AL

smirnoff · « **Reply #115 on:** April 25, 2017, 10:23:34 PM »

Fantastic, really good

z1pp132002 · « **Reply #116 on:** April 26, 2017, 09:36:51 AM »

Starting to remind me of Enemy at the Gates.

tomrommel1 · « **Reply #117 on:** April 26, 2017, 09:40:08 AM »

stunning indeed

gamer Mac · « **Reply #118 on:** April 26, 2017, 10:40:03 AM »

Stunning work should there not be a sniper position at the top of the chimney?
Looking like a very interesting table to play on, how are you going to deal with line of sight?

alcal · « **Reply #119 on:** April 26, 2017, 12:29:09 PM »

I only wrote one sentence to go with this batch of pictures ...and still I get the question............doh!

Yes there is a few cut outs and access points to be done yet.My minicraft drill packed up so I had to wait for the replacements to turn up (came today)
Did you know that the Lasur Chemical works was the location of the Russian sniper school.............who`d a thought huh.

Cheers AL

News:

Donate

We Appreciate Your Support

Recent

Author Topic: STALINGRAD (Read 55001 times)

Related Topics