In the last year most of the terrain I have built has been commercially available kits or small scatter pieces. I decided I needed to build something a bit more substantial and one thing I've wanted to try for a while is using tile grout as brick mortar for building construction. After spending an hour or so cutting bricks out of an insulation foam board with my hot wire cutter I knew I had plenty of building material to build something that I could play around with brick construction with. I started building following a relatively simple plan of making a two story house with an attached barn or shed. I like to use 1/16th inch styrene sheet to base my terrain and this project was no exception. From there the rest of the construction was the relatively simple matter of laying the individual bricks and building up the timber frame for the house structure. As I used PVA glue during construction I tended to work in a couple of quick 15 minute sessions throughout the day to allow for drying time. The roof is a styrene base with laser cut paper shingles.
After finishing the basic construction and paint I stepped away from the build for a good month or so and tinkered with other things. In the spirit of clearing off my workbench I figured I should sit down and finish the piece so that I can move on to other projects guilt free. The model is mostly done but still needs a touch up here and there, a chimney pot, some more plants and greenery, and possibly proper doors and windows if I feel like it. I built a wire tree armature to plant on the base. I just need to add foliage to it and plant it on the base. Hopefully I will finish the last remaining to do items soon and truly be done!
Below are a couple of pictures showing the build at present state and earlier on in construction.