20mm Zombies

[Ultravanillasmurf]

I am after suggestions for 20mm zombies compatible with the Mark Copplestones Gaslands figures.

Thanks in advance.

[Mr. White]

You want the two Dark Alliance boxes... Zombies 1 and 2. They're 1/72 and match the Gaslands models perfectly. It's what I use

I've got a decent write-up on em in this post: https://leadadventureforum.com/index.php?topic=129236.msg1644146#msg1644146

Here's Copplestone and Citadel Highway Patrolmen taking aim

[Ultravanillasmurf]

Thanks, though I am concerned about the soft plastic and the flash issue you mention.

[Mr. White]

The flash isn't noticeable at all during play, but then again maybe my dodgy paint job helps hide the plastic imperfection.

Either way, I think your next best option is probably Elheim: https://www.elhiem.co.uk/ourshop/cat_813669-Zombies.html

[Ultravanillasmurf]

Cool, thanks.

Lots of interesting stuff there - I noticed the Twilight 2000 cover stars.

[Daeothar]

I've used a combination of Dark Future zombies and the zeds from the apptly named 'Zombies' game by Twilight Creations.

They sell the minis seperately; I bought mine for €15,- in a bag of 100! There's only 5 poses, but for that price, and mixed in with the DF ones, they work really well. (now to paint all these b*ggers ).

[Ultravanillasmurf]

...the zeds from the apptly named 'Zombies' game by Twilight Creations.

I have a box of those somewhere (I think they glow in the dark).

[Ultravanillasmurf]

...the zeds from the apptly named 'Zombies' game by Twilight Creations.

Found them.




And this lot do not glow in the dark.

[dadlamassu]

I have hundreds of those from a long abandoned project.
PM me if anyone interested.

[zemjw]

I spent far too long trying to make those Zombies!!! figures work with 28mm ones. They pretty much ended up on pedestal bases, although they did work - from a distance, as a horde

However, I always thought those figures were 25mm, rather than 20mm, so I'm surprised they fit in so well.

[Calimero]

These Dark Alliance Zombies don't look too bad... 

[Mr. White]

I think they're great. A fantastic, cheap way to fill out a horde in 20mm. Flash imperfections aren't noticed at all during play.

[Darathar]

Elhiem do a small range of zombies too. For the flashing issue of dark alliance plastics I use a tea light candle and a paper clip, heat up the end and run it along the flash lines I gets rid of it very well.