*

Recent Topics

Author Topic: Termirons - 15/18mm Terminators / Necrons  (Read 2277 times)

Offline zrunelord

  • Mastermind
  • Posts: 1351
    • Picts from the Front
Termirons - 15/18mm Terminators / Necrons
« on: November 04, 2020, 02:45:14 PM »
Hello again all,
Here is my take on Terminator / Necrons.
Models are Kryomek Nexus Talos ( to be used as medium mecha ) , The Scene Heavy robots ( to be used as PA) , the Scourge ( to be used as Grunts) by Rebel Minis and Puppetwars cyber spiders ( to be used as repair droids )

I'm always on the search to paint minis as quickly & efficiently as possible, otherwise the lead mountain will remain just so.

These are metal minis so it would be counter productive to undercoat , basecoat , paint etc... so I said why not use the metal as a the final finish. Here's how to do it.

Blue / Black wash
Then dry buff ( i.e. without a polishing medium ) to remove top most paint layer. Re do the wash if and where necessary.
Eyes and energy cell glow painted first with a GW Jade green + Vallejo Flo mix , then a small wash of GW Hexwraith glow finished by a light, light blue drybrush.

For the cyber spiders the buffing is not done as they're resin models.

I think they came out quite good and one good easily do an army very quickly. The models themselves look way better than the pics.

Resistance is futile.....and they will be back ;)

Thanks for your comments.
Z

https://castrarunis.blogspot.com/2020/11/termirons-1518mm-terminators-necrons.html







« Last Edit: November 04, 2020, 02:49:18 PM by zrunelord »
http://castrarunis.blogspot.com/

Imagine & you can.
Most see shapes you must see possibilities.
Z

Offline Cacique Caribe

  • Mastermind
  • Posts: 1996
  • Gelatinous Legal Alien
Re: Termirons - 15/18mm Terminators / Necrons
« Reply #1 on: November 04, 2020, 03:19:16 PM »
Wow!  I, for one, welcome our robotic overlords.

Dan

Offline CookAndrewB

  • Mastermind
  • Posts: 1734
    • 3d designs can be found at Thingiverse
Re: Termirons - 15/18mm Terminators / Necrons
« Reply #2 on: November 04, 2020, 06:51:24 PM »
Those look great. I haven't seen the bigguns in the back, but they do the job well!

Offline zrunelord

  • Mastermind
  • Posts: 1351
    • Picts from the Front
Re: Termirons - 15/18mm Terminators / Necrons
« Reply #3 on: November 04, 2020, 08:25:02 PM »
Thanks
Indeed Dan ... futile to resist!!!

Cook you can find them here. They're nice 28mm models
Had them for years.. might as well use them :D

https://www.shop.scotiagrendel.com/index.php?main_page=product_info&cPath=217_218_3_112_115&products_id=3388

Z
« Last Edit: November 04, 2020, 08:28:05 PM by zrunelord »

Offline Ockman

  • Mastermind
  • Posts: 1800
Re: Termirons - 15/18mm Terminators / Necrons
« Reply #4 on: November 06, 2020, 07:26:25 AM »
Those are really nice! Do you have any of the other robots that the Scene carries?

Offline manic _miner

  • Scatterbrained Genius
  • Posts: 3370
    • Four A miniatures
Re: Termirons - 15/18mm Terminators / Necrons
« Reply #5 on: November 06, 2020, 03:34:13 PM »
 The Talos figures fit in really well with the others.

Offline zrunelord

  • Mastermind
  • Posts: 1351
    • Picts from the Front
Re: Termirons - 15/18mm Terminators / Necrons
« Reply #6 on: November 07, 2020, 01:56:46 PM »
Thanks,
Yes Ockman I have all his robots.

Manic - The Nexus Talos are great minis and I managed to get all the different ones through the years.

They fit really well in both 15/18 and the Kryomek 28mm, especially their cyclos penal infantry.

Will post more pics soon
Z

Offline zrunelord

  • Mastermind
  • Posts: 1351
    • Picts from the Front
Re: Termirons - 15/18mm Terminators / Necrons
« Reply #7 on: November 14, 2020, 03:55:25 PM »
And here they are all finished , the funny thing is, that I spent more time on the green glow effects than on the models themselves.
Some of them took more than 6 thin coats to finish, Duncan Rhodes would be happy.
Vallejo Flo Yellow + GW Hexwraith glow was used to build the glow bit by bit but the end effect is worth it.

Thanks for you comments
Z

















« Last Edit: November 14, 2020, 03:57:46 PM by zrunelord »

Offline CookAndrewB

  • Mastermind
  • Posts: 1734
    • 3d designs can be found at Thingiverse
Re: Termirons - 15/18mm Terminators / Necrons
« Reply #8 on: November 16, 2020, 07:56:15 PM »
Good looking bunch of big stompy robots.

Offline zrunelord

  • Mastermind
  • Posts: 1351
    • Picts from the Front
Re: Termirons - 15/18mm Terminators / Necrons
« Reply #9 on: November 19, 2020, 03:42:38 PM »
Thanks Cook,
Pity the camera didn't show the actual paint glow.
The Kryomek robots are very nice minis and I think the mixture of makes really
worked well.

I like the Scene ones because you get 10 unique poses and the Rebel Minis & Puppet wars ones because
they are great minis to build a horde.

Z

Offline War Monkey

  • Mastermind
  • Posts: 1331
    • Silo1313
Re: Termirons - 15/18mm Terminators / Necrons
« Reply #10 on: November 19, 2020, 06:21:34 PM »
Wow! Those look so good. I still just can't get over those spider robots. How they look really good with this setup.
Just remember "If the Enemy is in range, so are YOU!

http://silo1313.blogspot.com/

Offline Deflatermouse

  • Librarian
  • Posts: 172
Re: Termirons - 15/18mm Terminators / Necrons
« Reply #11 on: November 21, 2020, 12:28:46 AM »
They look good. I am really taken by the spiders.
They are a bit more than I expected to pay but nice.
Thanks for sharing

Offline Cacique Caribe

  • Mastermind
  • Posts: 1996
  • Gelatinous Legal Alien
Re: Termirons - 15/18mm Terminators / Necrons
« Reply #12 on: December 07, 2020, 10:00:27 AM »
Are the spiders metal or resin?  I can’t find the listing.

Dan

 

Related Topics

  Subject / Started by Replies Last post
10 Replies
3527 Views
Last post August 17, 2009, 11:52:44 AM
by Gluteus Maximus
15 Replies
5478 Views
Last post May 23, 2015, 10:39:35 AM
by Vermis
0 Replies
809 Views
Last post December 18, 2016, 07:06:25 PM
by noigrim
0 Replies
705 Views
Last post August 22, 2017, 03:46:51 PM
by noigrim
0 Replies
837 Views
Last post January 05, 2018, 03:29:11 AM
by tim in saskatoon