Author Topic: Hammer and plow as a vector drawing (Read 7060 times)

Remington · « **on:** 08 April 2013, 09:29:12 AM »

Hey there,

I am looking for either a vector based drawing or a clear line drawing of the Hammer and Plow symbol used at the early stages of the RCW... Is any one of you aware of such a file? My google-fu has regrettably let me know...

Cheers,

Dimi

former user · « **Reply #1 on:** 08 April 2013, 10:12:22 AM »

Remington · « **Reply #2 on:** 08 April 2013, 10:22:35 AM »

Oh cool... That's a good start. Maybe I could vectorise that. Thanks, former user.

former user · « **Reply #3 on:** 08 April 2013, 10:24:39 AM »

But wait until @cuprum and @MarkPlant show up, I am sure they will have a bucketload to offer

btw, I am not really sure it was used on flags and not on badges only.....

Remington · « **Reply #4 on:** 08 April 2013, 10:32:15 AM »

I've spotted these on google, but sadly they would be a paint to convert into line drawings.

As far as I can remember, some frags only carried it, but then again, it's not that important anyway... As long as it looks good. I on the other hand would like to have it on dice.

former user · « **Reply #5 on:** 08 April 2013, 10:46:21 AM »

why do they have to be line drawings?
You need them for dice only?

Remington · « **Reply #6 on:** 08 April 2013, 10:53:34 AM »

Currently that is what I am thinking off, yes. And as far as I know, the custom dice makers need vector based files. A line drawing then improves scalability. The simpler, the better. The drawing has to be recognisable on the little dice-side.

former user · « **Reply #7 on:** 08 April 2013, 10:59:42 AM »

I see
well the hammer and plough symbol I always found a bit difficult to recognize anyway in outline, though historically correct...

Remington · « **Reply #8 on:** 08 April 2013, 11:11:16 AM »

Yeah, that's why I haven't been satisfied by my google finds so far... and hence this thread

sepoy1857 · « **Reply #9 on:** 10 April 2013, 09:54:53 AM »

Quote from: Remington on 08 April 2013, 10:53:34 AM

Currently that is what I am thinking off, yes. And as far as I know, the custom dice makers need vector based files. A line drawing then improves scalability. The simpler, the better. The drawing has to be recognisable on the little dice-side.

Oooooo...sounds good! A project I'd also be interested in.

Remington · « **Reply #10 on:** 10 April 2013, 10:34:47 PM »

Now if only someone would have a nice line drawing for this...

CompanyB · « **Reply #11 on:** 10 May 2013, 06:29:43 AM »

I'll bite.. What's my take if I do it?

CompanyB · « **Reply #12 on:** 10 May 2013, 06:31:03 AM »

Actually, I think I already have this done somewhere... for some alternate RCW patch sets! I'll look on my hard drive.

Remington · « **Reply #13 on:** 10 May 2013, 07:00:46 AM »

Oooooh, support from the big guns! Sounds really cool! Thanks for biting. Look faster!

Elk101 · « **Reply #14 on:** 10 May 2013, 07:57:39 AM »

A line trace on CAD would do the trick if you know someone with access to it.

News:

Recent Topics

Author Topic: Hammer and plow as a vector drawing (Read 7060 times)

Remington

Hammer and plow as a vector drawing

former user

Re: Hammer and plow as a vector drawing

Remington

Re: Hammer and plow as a vector drawing

former user

Re: Hammer and plow as a vector drawing

Remington

Re: Hammer and plow as a vector drawing

former user

Re: Hammer and plow as a vector drawing

Remington

Re: Hammer and plow as a vector drawing

former user

Re: Hammer and plow as a vector drawing

Remington

Re: Hammer and plow as a vector drawing

sepoy1857

Re: Hammer and plow as a vector drawing

Remington

Re: Hammer and plow as a vector drawing

CompanyB

Re: Hammer and plow as a vector drawing

CompanyB

Re: Hammer and plow as a vector drawing

Remington

Re: Hammer and plow as a vector drawing

Elk101

Re: Hammer and plow as a vector drawing

Related Topics