Well I have finished the blooming pitch complete with stumps and I am rather happy with the results, photos to follow. But firstly the actual dimensions of the pitch are as follows:
The width of the base for the pitch is 14" in diameter or 7" in radius.
The actual pitch or playing surface is almost to scale at 1/56 in length at 12", in real live the length of a 22 yds pitch would be 14", now you can see I did a miscalculation with the pitch and the diameter and meant that the pitch is 12" long or 19 yds, a whole yards short. Memo to me to remember to add the field on it next time.
The width of the pitch has no set width, which I am a little at but I have actually gone for e width that is a little wider so it "looks right" with 28mm chaps. So the neat grassed pitch is 4" wide.
The Crease Marking are about 1" for the start of the pitch and another line a follow 3/4" in front of that. The two outer lines are 1/4" from the pitch edge.
The Stumps being made for tooth picks were cut to be 3/4" tall with bails, which was made from thin garden wire.
So here are some actually photos of it.



