Author Topic: Fallout Vault Dwellers and Radscorpions updated 26/01 sentrybots finished (Read 13454 times)

Wyrmalla · « **Reply #15 on:** 18 February 2015, 09:12:55 AM »

Hey that glowing one doesn't emit radiation does it? Hmn, I'm not sure I want to stick around here to finish my comment if it does...

* zips up Radiation Suit

...Ok, I should be fine for another few lines, but all that ticking doesn't has me a wee bit concerned (were they supposed to poke holes into this thing when they strap on all the armour?).

Ooh another Deathclaw to add to the pack Messyart's sent out. It'd be nice to see a line up of everyone's painted ones at some point. Till then that turned out great. Hmn, I like the base. Is that just polystyrene or something?

Oh I saw you post about those scorpions in the pinned thread. Is that larger one from the same source by any chance? I'm just wondering how much money you're sending those people. ...Youknow as a legitimate concern for your wallet and not just prying about where to source minis from. ...Being a concerned citizen and such.

Right I know my skin shouldn't be crackling that light and these antenna I've grown are becoming uncomfortable in this suit. ...You're sure I can't be irradiated over the internet right? Ah, Ok time to see if all those points I put into medicine were worth it (heh, my train's coming into the station in other words. Anyhow, nice to see you putting out more stuff. Great as always).

zizi666 · « **Reply #16 on:** 28 February 2015, 07:20:40 AM »

Oh dear, no idea why I haven't answered your post yet

The base is an MDF lasercut base where I glued some sculpture block ( http://www.sculptureblock.eu ) onto and sculpted the rocky pattern. I had to do that since I mispositioned his arms when glueing and his claws come lower than his feet

Not sure which larger scorpion you mean ? My really large one is just finished and will be posted in the next message here

zizi666 · « **Reply #17 on:** 28 February 2015, 07:24:29 AM »

Added a giant albino radscorpion to the collection :

20150228_015207 by danny vercruyssen, on Flickr

This resin baby measures 9,5 cm from pincher to tail and comes from Pardulon miniatures.

beefcake · « **Reply #18 on:** 28 February 2015, 09:32:57 AM »

Wow, that's realistic. I've wondered about taking casts of actual creepy crawlies (dead ones) for minis. Probably wouldn't work too well.

zizi666 · « **Reply #19 on:** 26 November 2015, 06:36:49 PM »

Latest efforts have been focused on Incursion (WWW2), but when I brought 2 office sets (Ainsty) back from a 2nd hand stand at Crisis I had to slap some paint on those desks.
I was in doubt of filing off the cables and mouse/mousepad for a more Fallout look, but decided to keep 'em as they are.

28mm-desks-resin(1) by danny vercruyssen, on Flickr

Brummie Thug · « **Reply #20 on:** 26 November 2015, 09:09:00 PM »

Nicely done they look great all weathered like that.

DELTADOG · « **Reply #21 on:** 26 November 2015, 09:36:11 PM »

Very good job on them! I like this Desks a lot and beside the Mouse its a good proxie for the Fallout ones!

Messyart · « **Reply #22 on:** 26 November 2015, 09:40:14 PM »

[A]: Take Pencil

zizi666 · « **Reply #23 on:** 27 November 2015, 08:21:38 AM »

don't forget the folder (no idea when those will come in handy...)

Gunbird · « **Reply #24 on:** 27 November 2015, 01:21:36 PM »

Very nice, but the PC stands out a bit now, maybe a filter or 2 to tone it down to IBM beige?

I wish I had had the time to visit the Bring and Buy at Crisis, you seem to have found the good stuff! Maybe a(nother) trip to Ainsty seems to be in order next year.

zizi666 · « **Reply #25 on:** 27 November 2015, 04:58:29 PM »

Quote from: Gunbird on 27 November 2015, 01:21:36 PM

Very nice, but the PC stands out a bit now, maybe a filter or 2 to tone it down to IBM beige?

I wish I had had the time to visit the Bring and Buy at Crisis, you seem to have found the good stuff! Maybe a(nother) trip to Ainsty seems to be in order next year.

No experience with filters yet.

Didn't feel like queuing in that crowd, but as luck would have it, a friend did and noticed a guy selling plasticville buildings. He knew my interested in that stuff, so he dragged me along and lo and behold, besides cheap plasticville he also sold cheap ainsty stuff

It really was my deal of the day.

Gunbird · « **Reply #26 on:** 27 November 2015, 07:17:09 PM »

Filters are dead easy mate, just a small smear on the pc would be sufficient and then a brush wetted down with (preferably odorless) thinner to smear that bit all across the pc will tone it down quite nicely. When in doubt, add more thinner to remove 99% of it. Give it a try, it opens a whole new painting doorway.

I wish someone would make a Fallout correct PC in resin though. I could use a dozen of those easily.

Messyart · « **Reply #27 on:** 27 November 2015, 07:34:47 PM »

Quote from: zizi666 on 27 November 2015, 08:21:38 AM

don't forget the folder (no idea when those will come in handy...)

I always collect the pencils..
Being weightless and worth a tiny bit in caps is a winner in my books.

zizi666 · « **Reply #28 on:** 27 November 2015, 09:13:20 PM »

Quote from: Messyart on 27 November 2015, 07:34:47 PM

I always collect the pencils..
Being weightless and worth a tiny bit in caps is a winner in my books.

That is so FO3

now you can get lead out of them, which will come in handy once I learn how to lead-line apparel for better rad-resistance

zizi666 · « **Reply #29 on:** 25 December 2015, 08:14:02 PM »

Raider equiped with a crossbow and sword/large knife (EM4 miniatures savage)

20151225_205530 by danny vercruyssen, on Flickr

News:

Recent Topics