Terminator Genisys...expanding...where to get the big ones?

[johnl5555]

  I stand corrected. The T-1 is a Playmates toy. I was talking about the Minimates one pictured here:
http://www.ebay.com/itm/MINIMATES-TERMINATOR-2-JUDGEMENT-DAY-HUNTER-KILLER-TANK-/380509019323

These are the ones I have as well as the T-1's.

It's plenty large enough. Looks cool and was cheap when I bought mine.

[Momotaro]

If anyone's looking for Terminator miniatures River Horse have a 30% off sale at the minute. (no affiliation)

Just to mention this one again - the resin Spider Tank is now £28 in their store.

[aliensurfer]

I have one of these which works for 28mm quite well

yup I picked up one or two of those two. Not that I am gaming Terminator, but they are useful models.

[Maccwar]

Deleted

[rwwin]

If you're still in the market,  Here's an auction for a T-2 Movie Hunter Killer tank put out by Hollywood Collectibles Group maybe 7-8 years ago.  They don't come up very often.  I have one and there are some pros and cons.  They were produced in a rather light resin (same stuff that Applause uses for their figures if you're familiar with it).  I'ts a multipart cast, but it comes pre-glued and pre-painted out of the box.  On the up side it's much closer to gaming scale than the Pegasus one (11 inches long).  On the downside, it's cast from a rather poorly sculpted master.  The corners are wonky in places, the scribed panel lines rough and at least on mine, they didn't glue the head on straight.  The paint job is a straight up spray silver without any weathering with details painted on the orange and blue lights.

As a movie collectible it's crap, but as a gaming miniature it's not too shabby.  If I recall right, it retailed for somewhere around $40, so the current price is ok relative to that.  Might be preferable to the Pegasus kit if you want a movie tank.

http://www.ebay.com/itm/192049147635?_trksid=p2060353.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT

[Malebolgia]

Looks ace! I think the price will be high (3 days to go, 4 bids in). And shipping is a killer (as always ). But from the photos it looks great!

[aliensurfer]

If you're still in the market,  Here's an auction for a T-2 Movie Hunter Killer tank put out by Hollywood Collectibles Group maybe 7-8 years ago.  They don't come up very often.  I have one and there are some pros and cons.  They were produced in a rather light resin (same stuff that Applause uses for their figures if you're familiar with it).  I'ts a multipart cast, but it comes pre-glued and pre-painted out of the box.  On the up side it's much closer to gaming scale than the Pegasus one (11 inches long).  On the downside, it's cast from a rather poorly sculpted master.  The corners are wonky in places, the scribed panel lines rough and at least on mine, they didn't glue the head on straight.  The paint job is a straight up spray silver without any weathering with details painted on the orange and blue lights.

As a movie collectible it's crap, but as a gaming miniature it's not too shabby.  If I recall right, it retailed for somewhere around $40, so the current price is ok relative to that.  Might be preferable to the Pegasus kit if you want a movie tank.

http://www.ebay.com/itm/192049147635?_trksid=p2060353.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT

I managed to get one of those too off of Akula a good few years back, very nice model.

[steders]

That's the one! I managed to get a pair a few years ago. All of the heads are slightly scu-wiff. I had intended cutting them off and repositioning them. The track section seems better sculpted than the body. Possibly 2 different sculptors?

[Malebolgia]

Okay, you guys made me browse the web for one...and I found a copy here in the Netherlands for €24,95 (so €31,90 including shipping). Ordered it right away

[soulman]

Metal HK flyer and Tank coming April......

http://necaonline.com/category/licenses/movies/terminator-2/

[AKULA]

I've got 2 of them as well, really nice but the body is leaning over slightly. I've thought about cutting it in half and magnetising it.
Pegasus do a 1/35th scale one as well

Are those the resin ones I sold?  Another started but never finished project of mine 

[Giger]

Looks Like I'll be picking up one of those Cinemachines tanks when they are released, a touch small perhaps but should work fine on the table top.

[Malebolgia]

What a PERFECT day this is! The mailman delivered two boxes and what did I find inside...



So the two Terminator Salvation plastic Hunter-Killers from Playmates (left and right, thanks nozza_uk!) and the resin Terminator 1&2 Tank Hunter-Killer from Hollywood Collectibles. And they look awesome for gaming. Enough detail, the right size (and the resin one is almost 1kg!). Perfect!

Terminator 1&2 Tank Hunter-Killer

(the casting's a bit wonky here and there and the paintjob is terrible, but for gaming this model is terrific!)

Terminator Salvation Aerial Hunter-Killer


Terminator Salvation T-1

(he'll be used as a Spider Tank in the Terminator game, a lighter version of the Tank...which seems suitable to me)

So excellent models and great for gaming. If you are into Terminator, get these. LAF, thanks for helping me out getting them (with special mentions to nozza_uk and rwwin).

Oh, and here's what happened *within 5 minutes* after opening the package...




Duckhunt (the models can actually shoot! The Aerial HK shoots missiles and the T-1 shoots his miniguns..literally). He was so sad he had to go to bed after dinner that dad had to promise him he could play with them tomorrow after school

[aliensurfer]