Whitechapel Horror! UD 28/03 - Entire table so far (30 images)

[Silent Invader]

Whilst I have no doubt that you will make that figure, I may be able to help with the bell.
I have a plastic one from the Skaven Screaming Bell that could work as a basis if that would help....

https://www.games-workshop.com/en-GB/Screaming-Bell-2015

Let me know if it tickles ya.
 

Ooooh that tickles but are you sure you can spare the bell from the kit? Please do PM me with what you’d like for it. Thanks very much Paul 

[Silent Invader]

A bit more progress ....

The spire is slightly taller than the main body of the church. It’s made from cereal card so I’ll probably reinforce it.



The inside. At the rear will be steps down to a side door on one side, and steps down to a suggested crypt access on the other.



The front showing the bump out that will hold the clock. Parapets need to be addd to the balcony and to the sides of the steps. I also need to add 4 support pillars.



It needs an awful lot of tidying up before I can fit the laser cut windows.

Edit: the tower isn’t actually crooked ..... that’s the camera doing weird things....

[Malamute]

Oh my! That’s going to be impressive.

[majorsmith]

Skills! Looking good

[Silent Invader]

Cheers chaps. 

Next big step was to get the support pillars in.

These photos have the warehouse behind, just to show how tall the church is with it’s spire in place. As it should do, it will dominate the area BUT is a nightmare to photograph without distortion.



The pillars are cheap gel pen bodies:



The bat’s eye view (if bats could see that far)

[majorsmith]

Brilliant

[OSHIROmodels]

Safety googles when playing please 

[Silent Invader]

Safety googles when playing please 

Only tall people will be at risk 

[Silent Invader]

The church bell has arrived.

The bell was very kindly donated by Mason (thank you Paul!  ) and is from a GW Skaven kit.

The bell is perfectly-sized, being shown here in its raw form.



I expect that I will trim off the lower part of the flared rim for a bit more room in the tower. I’ll also remove most of the decoration. I have in mind the poor victim to be suspended from it, who will be magnetised.

BTW, the milliput is in the throes of being tidied up. 

[Mason]

Good to see it getting a proper use.
 

I expect that I will trim off the lower part of the flared rim for a bit more room in the tower.

So, you will be making suitable adjustments to the 'bell-end' to make it fit better....?
 

[OSHIROmodels]

That's huge 

I'm assuming the figure will be converted somehow?

[Silent Invader]

So, you will be making suitable adjustments to the 'bell-end' to make it fit better....?
 

Indeed 

[Silent Invader]

That's huge 

I'm assuming the figure will be converted somehow?

Yes and yes. I’ll be using Warlord Project Z parts for the basic assembly. Though sadly my Project Z stash is starting to run low ..... 

[Blackwolf]

Great stuff!
That Mason bloke is a good egg isn’t he

[Malamute]

The bell idea is inspired, I love it.