Author Topic: My Entry For Roebeasts Trash Bash Comp (Yea, Second Place!! :-) now pic heavy!) (Read 9509 times)

OSHIROmodels · « **Reply #15 on:** February 15, 2012, 12:23:14 PM »

Quote

'Foss style'? Is that the artist Chris Foss? I've just realised (without knowing it before) he was one of my favourite artists!! I got a book full of his drawings when I was about ten called 'Spaceship 2000'. Amazing artwork! Are you thinking a colourful style?

That's the one

Red and yellow would be great!

cheers

James

James Holloway · « **Reply #16 on:** February 16, 2012, 04:55:30 AM »

Quote from: Andym on February 15, 2012, 07:45:04 AM

Any hints? .......or are you keeping your cards close to your chest?

"Launch observation platform" is my working title.

Roebeast45 · « **Reply #17 on:** February 16, 2012, 05:20:23 AM »

Quote from: James Holloway on February 16, 2012, 04:55:30 AM

"Launch observation platform" is my working title.

You didn't actually eat anything from that container did you? It looks...challenging.

Dr. The Viking · « **Reply #18 on:** February 16, 2012, 07:11:34 AM »

AndyM

Here's what you have to do:

1)Sit down at your desk

2)Write a nice letter to some one in the creative industry detailing your excessive conceptual creativity

3)Get a job where you put your talent to work!

Amazing as always!

James Holloway · « **Reply #19 on:** February 16, 2012, 09:40:08 AM »

Quote from: Roebeast45 on February 16, 2012, 05:20:23 AM

You didn't actually eat anything from that container did you? It looks...challenging.

No, no, no, I didn't eat them.

I gave them to my wife.

Andym · « **Reply #20 on:** February 17, 2012, 09:38:13 AM »

Quote from: Dr. The Viking on February 16, 2012, 07:11:34 AM

AndyM

Here's what you have to do:

1)Sit down at your desk

2)Write a nice letter to some one in the creative industry detailing your excessive conceptual creativity

3)Get a job where you put your talent to work!

Amazing as always!

If you know anybody looking for somebody let me know, I'd give up my electricians job in a heartbeat!!

Still just showing some WIP to keep me motivated. I've started adding detail. I've used various bits of tubing, plastic card, plastic sprue and a couple of wee bits I had left over from a GW Rhino and 1:32 supplies model kit....

.....and a camera made from the spare bits from a Rhino kit...

I've still got a lot to add so as there's not much in the way of flat surfaces visible and then finish the legs and paint it!! Again....no pressure!!!!

aircav · « **Reply #21 on:** February 17, 2012, 09:45:04 AM »

Brilliant

your ingenuity amazes me

FramFramson · « **Reply #22 on:** February 17, 2012, 04:55:38 PM »

Say, what's that mesh you're using Andy?

Admiral Benbow · « **Reply #23 on:** February 19, 2012, 09:27:22 PM »

Great project, Andy, and creative as ever ...

Andym · « **Reply #24 on:** February 20, 2012, 03:02:28 PM »

Cheers guys!!

Quote from: FramFramson on February 17, 2012, 04:55:38 PM

Say, what's that mesh you're using Andy?

I'm afraid it's something I found on a building site that someone was throwing out. Depending on how much you need I may be able to post you some, but I don't have much left!

Well I've got a bundle done and the builds pretty much finished, but I'm afraid I can't show it until the competition is finished!

Roll on 1st of March!!

Good luck to everybody involved!!

Roebeast45 · « **Reply #25 on:** February 20, 2012, 03:59:24 PM »

Quote from: FramFramson on February 17, 2012, 04:55:38 PM

Say, what's that mesh you're using Andy?

That looks like Wireform craft mesh.

http://www.amaco.com/shop/product-368-wireform-metal-mesh.html

FramFramson · « **Reply #26 on:** February 20, 2012, 04:39:56 PM »

Not to worry... it's not needed right now, I was just wondering about the source. That site Roebeast linked seems to be an acceptable substitute.

Andym · « **Reply #27 on:** March 12, 2012, 09:09:01 AM »

Yea!!! I managed to come second!!

Well congratulations to the other guys in the competition! Diegos Landing Craft was a well deserved win. Really great use of the trash bits he chose!!! Brill!! The observatory that came third was good too!! Lovely piece!!

This was mine. The Spy-DAR....

And this is what it looks like painted up. I decided to go for a kinda snowy camo colour because of the terrain I had in my wee flat. I'm gutted the cockpit couldn't be seen in the photos, it's just too dark!! There's radar screens, maps, readouts and even joysticks on the leather bound chair!

And this is the wee spiel I had to go with it...

'The vehicle is called 'Spy-D.A.R.'. This 28mm scale model is the unarmed scout version of the DAR(Delta-legged All-terrain Rover). The Spy-DAR is supposed to be able to reach the parts other vehicles just can't reach. Using the four telescopic legs and independently driven tracked bogies the rover can descend down small gullies and easily over rocky, dangerous terrain to achieve the optimal vantage point. The telescopic pole-mounted camera allows the Spy-DAR remain behind cover and stay concealed. The large air intakes allows the vehicle to reach extreme heights and still operate at a high output. With additional high gain radio and satellite communication equipment the Spy-DAR is the ultimate scout vehicle!'

Thanks again to Roebeasts for hosting this and letting me enter his comp and thanks to the judges for their nice comments!

Blackwolf · « **Reply #28 on:** March 12, 2012, 09:51:00 AM »

Brilliant work Andy,from conception to the paint scheme,wonderful

marianas_gamer · « **Reply #29 on:** March 12, 2012, 10:35:10 AM »

The paint job takes this from a nice piece to the next step, very nice. Roebeast must be happy to have had such great entries.
LB

News:

Donate

We Appreciate Your Support

Recent

Author Topic: My Entry For Roebeasts Trash Bash Comp (Yea, Second Place!! :-) now pic heavy!) (Read 9509 times)

Related Topics