Koyote's SAGA Age of Crusades and Age of Chivalry

[Basementboy]

Offering a quick prayer to the heavens perhaps? The whole group look great either way, the green stuff sections blend really naturally

[Ogrob]

Either way, they are going to look great. That muted blue is really nice, a solid choice.

[Koyote]

The cavalry below will replace the mounted Hearthguard that I gave away.

The models are Berber Cavalry 3D prints designed Caballero Miniatures. Since I am not the type to leave well enough alone, I've replaced the heads (which in IMO were a bit too small) with Perry Afghan heads, and replaced the weapons/hands with unused bits from my Victrix Saxons kit. The skinny Victrix plastic spears are a bit fragile, but MUCH less so than the 3D printed spears. And since Moor HG cav are armed with javelins, I replaced some of the models' left hands with hands holding bundles javelins.




The models below are more converted Caballero Miniatures. The model on the right will be my new Warlord and the drummer on the donkey (or is it a mule?) is going to be added to camel cavalry HG unit. I have currently converted a total of 5 camel cav. If you look back through this thread you will see how labor intensive this is.  So, rather than put myself through all of that again to produce a 6th camel cav model (which is what I need for my Mutatawii'a warband), the sixth "camel" will be this drummer. I replaced the original model's head with another Perry Afghan head. I also replaced the original drumsticks, which had broke off during shipment and were only tiny slivers of resin to begin with, so good riddance to them.

[Ogrob]

Great builds mate, the afghan heads work a treat. Always tricky converting 3D-prints, you never know exactly what is going to come off.

[Koyote]

The model pictured below and to the left was originally posed as the model pictured below and to the right. Whereas the mode's original, twisted pose looks cool, once I replaced the model's original head with a Perry Afghan head, I couldn't reproduce the dynamism of the original model. No matter how I adjusted the Perry head, the pose no longer looked quite right.

My solution was to reposition the model's upper torso, so it is no longer twisted to far to the left. The model's torso is too thick to cut through using a hobby knife. And based upon my experience working with 3D printed models, I knew that the brittle resin material combined with the width of the torso and the positioning of the arms and sword hilt meant that cutting the model in two with my hobby saw would be a chore and likely cause damage to other parts of the model. Sawing through small sections of brittle resin, even with a very small hobby saw, can cause parts of the model to shatter and chip off. Plus, holding the model tight enough to allow one to cut through it with a saw can also cause damage to the model.

After experimentally placing the saw blade against the side of the model a couple of time trying to find just the right angle, on impulse I said "F*ck it." I put down the saw, picked up my hobby snips, quickly positioned snip's blades just above the belt (see red arrow below), and gave the handles a strong squeeze. The bottom half of the model stayed in my hands, but the upper torso shot up like a rocket, and sharply ricocheted off the ceiling.  The top torso landed on my hobby table, right in front of me, and the Perry head landed on the floor, beside my left foot.

Miraculously, not only did the model cleanly break apart exactly where I wanted it to, despite the ricochet and my strong grip on the bottom half of the model, both halves survived the experience, perfectly intact. The Perry head separated from the model when it hit the ceiling, but fragile arms and skinny little sword hilt were completely undamaged.

When on occasion, my hobby snips cause bits of a model to go flying, I generally spend the next 10-15 minutes searching through my cluttered office, trying to find the ejected part. This time, one piece landed on my desk, right in front of me, and the other literally landed at me feet. The whole thing made me laugh.

[Pattus Magnus]

I laughed about usually spending 10-15 minutes looking for the pieces that go flying, I’ve been there! (As I imagine most of us have.)

I’m glad the pieces cooperated this time and were easy for you to find, it’s not always the case! The conversion seems to be coming along well, anyway. I’m looking forward to seeing these guys painted- I expect they’ll be excellent like the rest of this army!

[Basementboy]

Wonderful work as usual! Love the little conversions on the cavalry- hope we’ll get to see them painted soon

[Tonhel]

Your converting skills are impressive! Looks fantastic!

[Koyote]

It's been a while since I posted update, but since I am starting work on my Muslim warband again, I figured I'd post.

Last summer, in anticipation of the West Coat Vikings' Battle of the Ages Tournament, I gave my Moors a facelift by replacing my mounted HG with new models the replacing the warband's boring black shields with snazzy new 3D printed shields.  Below are some group shots from that tournament.





Here some better shots of the HG.



From left to right is my warlord, another Hearthguard, and drummer on a donkey. The latter I've been using as the fifth model in my Mutatawwi'a camel HG unit.





West Coat Vikings is planning an Age of Chivalry and Age of Crusades tournament for this April. Since I won't have time to get an AoCh Scott warband completed by April (I'm waiting for Antediluvian Miniatures to restock their Scotts), my plan is to use this event as an incentive to finish the units I need to field by Muslims as Mutatawwi'a. Since my camels (and donkey) are already done, all that I need to do is to paint a proper unit of HG on foot. For this, I bought a sprue of Fireforge Games' Black Guard minis. I swapped out the heads out to match the rest of my warband, and replaced the cool bamboo spears with much less cool looking spears that better match the rest of my warband. The shields are 3D prints.




The tournament is also a good excuse to get my remains-in-play Saga ability tokens for both my Moors and Mutatawwi'a warbands.

[blacksoilbill]

Those cavalry are just superb!

[Ogrob]

Fantastic work as always! I am hoping to find time to build a muslim warband later this year, will need to come back for inspiration.

[Koyote]

I finished my first six Mutatawwi'a foot HG.  To me they look a bit too uniform. I'm painting another 4 of these fellows, so I can field two units of 5 HG each. I'll mix up the colors in these next four so that then when intermixed with all blue-coats they won't appear so uniform.




I also finished my FANATICISM token. I replaced the original 3D printed banner. It ended up being too fragile and the detail was poor. Instead, I used a LBM banner, which is both more durable and looks better.

[Ogrob]

Lovely work as always

[syrinx0]

Brilliant painting.

[OB]

Lots of inspiration there.