Author Topic: Roland air defense system on a scale of 1:100 (Read 1649 times)

Dr_oz · « **on:** 22 March 2023, 06:17:52 PM »

The first test of the 3d model of the Roland SAM. Draft seal of the SAM armored hull. The print quality is not up to par - the printing was done to check the details. The SAM turret will be printed later

Dr_oz · « **Reply #1 on:** 03 April 2023, 09:00:56 AM »

Today is the final test printing of the 3d model of the Roland SAM. Scale 1:100

Dr_oz · « **Reply #2 on:** 03 April 2023, 10:30:35 PM »

Test print

Dr_oz · « **Reply #3 on:** 04 April 2023, 01:09:09 PM »

Now there is still a version of the Roland 2 air defense system based on the AMX-30. The guidance radar can be glued to the Roland 1 turret.

Dr_oz · « **Reply #4 on:** 06 April 2023, 06:04:20 AM »

Finished the 3d model of the Roland 1 and 2 air defense systems on a scale of 1:100
ATTENTION! I do not guarantee quality printing on FDM 3D printers. A lot of small details are IMPOSSIBLE to print on an FDM printer
The different options include the following details:
1) SAM body with tracks and side screens with open and closed driver's hatch.
2) SAM body with simplified tracks with open and closed driver's hatch.
3) SAM body with open and closed driver's hatch and caterpillars separately
4) Towers with an open and closed hatch of the optical guidance system
5) guides with rockets straight and the second option at an angle of 30 degrees
6) Surveillance Radar
7) Missile guidance radar (SAM Roland 2)
8 ) The figure of the driver