Matakishi's Deadside Crematorium. Painted pics (page 3)

[matakishi]

So here's the plan, a Deadside crematorium. Lost souls get herded in one end and wonderful heat and energy to power a Great Engine gets pumped out the other. Simples.





Details of the setting here:
http://www.matakishi.com/shadowman2013.htm

[Eric the Shed]

have we started...I thought kick off was tomorrow

[matakishi]

I haven't done anything. Just had a thought or two.
I'll remove the pics until later.

[Eric the Shed]

could not resist...hope all is well. About time we caught up soon?

[OSHIROmodels]

Piccies please 

cheers

James

[matakishi]

I've put them back.

[Silent Invader]

They look dead good 

[pocoloco]

Being dead serious here, this looks very cool already at the sketch stage.

[matakishi]

just finalising the details and measurements.

On the right wall looking from the front will be the input box box the pipeway so that the energy generated can be sent off to the Great Engine.
The left wall will have the blood draining pipes and the blood reservoir.
The rear wall will have the chimney and it's furnace box and the ash chute with the ash and bone pile beneath it.
The front will have the imposing tall door and something above the window, (haven't decided what yet).

The roof will lift off so the flickering tea lights can be placed inside to provide the hellish light from the furnace which will be visible through the rows of windows on each long wall.
If I can manage a speaker there might be screams too

I wouldn't usually show these rough working out sketches of course, but I believe it's warranted in this instance since we're all competing; full disclosure and transparency and all that

[matakishi]

The weekend's here, time to build.
Here are the two sides. 4mm cork as always. I'm making changes to the plan as I go, normally I'd work everything out to the finest detail first but this is a quickie



I'm using some thin wooden grilling from Fenris Games for the window details. I used to use wire mesh and also tile spacers for windows but during the Shadow Man build this became my window of choice quite by chance and I'm keeping to it so everything looks like it belongs together on the table. Boo Hiss for using pre fabricated parts, I know, but what can you do?
Matchsticks for extra detailing.







The end walls are 100mm wide and 200mm to the apex.
The door's 80mm x 40mm. I've kept the idea for an interlocking metal sliding door that I originally intended bu I've changed to a vertical orientation so it's more like teeth. Door is card faced with coffee stirrers.





This is the housing for where the Pipeway will join the Crematorium.





Here's the Pipeway itself, not part of this build of course.



Time to stick the walls together.





I've added buttresses to this wall. They match the other side in size but not in placement but are enought o keep a unified design look. The blood resevoir will fit between these.



Here's the building in position on it's base (unglued as yet) with the chimney stood roughly in position. The base is 150mm x 220mm. The extra space at the back will accomodate the ash pile and the base of the chimney housing.

That's it, more to come.

[snitcythedog]

Very nice build so far.  Someone else with a NWS chopper!  One of my absolute favorite time saving tools.  I will have to look into the grilling from Fenris Games. 
Snitchy sends.

[matakishi]

Be careful, there's an awful lot of good stuff on the Fenris site 

[Captain Blood]

The return of King Cork 

A solid build already coming together.

[von Lucky]

Looking good. I like those windows.

[dampfpanzerwagon]

Great looking build.

Tony
PS.
I also own a NWSL Chopper!