Author Topic: diecast vehicle scale (Read 6023 times)

MuleSkinner · « **on:** 22 October 2008, 10:05:06 PM »

hi there, don't know if this has been asked before so i apologise in advance if it has.
i'm wanting to get some vehicles for my mayhem town project and i'm not sure what the scale is to fit in with 28mm figures. one person told me 1/43 while the guy in my local model shop told me 1/48 is the way to go, another told me 1/64 tho personally i think that will be way too small.
also are there any companies that make bikes to scale as i want a biker gang, preferably choppers or hogs. i've looked on ebay for bikes but most don't have the scale listed.
thanx
Mule

Geudens · « **Reply #1 on:** 22 October 2008, 10:33:44 PM »

Bikes? Curtis (also on this forum) does:

http://shop.ramshacklegames.co.uk/index.php?main_page=index&cPath=6&zenid=f8d62e513bdbc864e3f82b31352a5642

Rudi

Svennn · « **Reply #2 on:** 22 October 2008, 10:50:08 PM »

What a question and there is no correct answer. The biggest problem is that a lot of diecasts are not true scale but made to fit a box size so one thing marked as 1/43rd can be quite different from another etc.

Lead figures are not any true scale either. Many people convert the height of 28/30/32mm into a six foot guy and come up with around 1/56th but this can only be a guide. A true 1/56th scale mini would look terribly thin and gangly with very thin limbs etc. so sculptors bulk them out to look right. All weapons are notoriously oversized but again look right.

Having said all that I use 1/43rd (more variety and bargains available) and think most look fine. 1/48th for aeroplanes because again there is more available.

For the bikes I also would suggest going for something from a mini company like the Ramshackle ones already mentioned.

Luckyjoe · « **Reply #3 on:** 22 October 2008, 10:53:45 PM »

I went with 1/48. They seem about right with Horrorclix minis, but are a little too big for the WWG streets. I found a "Heavy Hitter" toy motorcycle at WalMart I converted. It's a little big, but not too bad. I don't know what scale it is though. It was just a cheap $2 toy. Here's a couple pics:

Luckyjoe

MuleSkinner · « **Reply #4 on:** 22 October 2008, 11:11:25 PM »

thanx for the prompt replies guys, i think i'll try both 1/43rd and 1/48th for the cars and trucks then.
the ramshackle bikes are just what i'm looking for, thanx for the link.
cheers guys

MuleSkinner · « **Reply #5 on:** 22 October 2008, 11:15:29 PM »

btw........i love the way you've raised the sidewalks on your town luckyjoe

Commander Vyper · « **Reply #6 on:** 22 October 2008, 11:51:46 PM »

It's huge!

Horwheelers choopers look great used by both Pappa M and myself.

Also E4M Miniatures carry a police bike and a sports bike which are nice and finall Eureka do scramblers and quads

The Commander

Luckyjoe · « **Reply #7 on:** 23 October 2008, 03:10:28 AM »

Thanks, Muleskinner. It's an idea from Andorax on the WWG forums. He made a n excellent tutorial for making a city board. I've been foolowing it. Here's a link if you haven't seen it.

http://www.worldworksgames.com/forum/viewtopic.php?t=5068

Luckyjoe

Pil · « **Reply #8 on:** 23 October 2008, 07:29:14 AM »

Quote from: MuleSkinner on 22 October 2008, 11:11:25 PM

thanx for the prompt replies guys, i think i'll try both 1/43rd and 1/48th for the cars and trucks then.
the ramshackle bikes are just what i'm looking for, thanx for the link.
cheers guys

I think that's the way to go. 1:48 looks a bit better but 1:43 is far more available and still looks ok. The biggest problem with different scales is not that they don't match with the models well, but that cars start looking out of scale next to each other

As for the bikes, I recommend the human biker gang from Westwind, 10 bikers on bikes for 20 quid:

http://www.westwindproductions.co.uk/
http://www.westwindproductions.co.uk/catalog/product_info.php?cPath=106_107&products_id=945

The downsides are that the heads of the bikers look a bit silly, and some of the bikes have some rather ugly decorations, but it's still a nice deal.

EM4 carry three different bikes, a sports bike, a police bike and a trail bike. All look nice but since none of them looks old school I think they're not very suitable for bikers. Here's a piccie of the trail bike (and rider):

Though I must say those Ramshackle bikes look good too

wolfgangbrooks · « **Reply #9 on:** 24 October 2008, 06:59:25 AM »

We just got the Ramshackle bikes to sell over here in the states. I just have to say that they are huge. 20mm from the top of the seat to the bottom of the wheels, more like a horse than a bike.

It's a little pricey, but black scorpion does a nice two seater.

dodge · « **Reply #10 on:** 24 October 2008, 07:35:07 AM »

I think possibly the best thing to do is to take a figure with you to measure up.

As everybody has said here scales vary for all types of model or toy.

I guess with these vehicles you are buying toys so you can go to the store and measure up.

Hope that helps

Dodge

Pappa Midnight · « **Reply #11 on:** 24 October 2008, 12:06:09 PM »

As Commander Vyper said, Hotwheels bikes are pretty good for 28mm minis:

If you've got any problems locating them I might have some about somewhere.

Regards
PM

Gluteus Maximus · « **Reply #12 on:** 24 October 2008, 12:52:14 PM »

Quote from: Pappa Midnight on 24 October 2008, 12:06:09 PM

As Commander Vyper said, Hotwheels bikes are pretty good for 28mm minis:
Regards
PM

They look great! Now I've just got to find a way of stealing my son's without him knowing

MuleSkinner · « **Reply #13 on:** 24 October 2008, 01:17:16 PM »

thanx for all the great advice guys, it's really helped.
those hotwheels bikes look excellent, if i can't locate any i just might take you up on your very kind offer Pappa

cheers again guys

mule

Braxandur · « **Reply #14 on:** 27 October 2008, 02:44:12 PM »

Prince August also has a few bikes in their future shock range:
http://www.princeaugust.ie/fs/index.html

the figures are actually really neat. the paintjob sort of kills their look...

News:

Recent Topics