Author Topic: 40mm Peninsular Side Project (Read 23630 times)

Rogerc · « **Reply #135 on:** January 01, 2024, 10:19:56 PM »

Cheers guys.

Has.been two of the cows are irregular the rest are 3d prints from ebay, just got some more ever s slightly bigger which I think are a better fit. The irregular ones are ok, the pack pony is probably the best of the useful bits.

has.been · « **Reply #136 on:** January 02, 2024, 07:01:11 AM »

Thanks for that Rogerc. I don't have access to 3d printing, so will settle for Irregular for the moment.
Hoping to scratch my 40mm itch this year with ACW skirmish. That might be as far as it goes, who knows.

Juan · « **Reply #137 on:** January 02, 2024, 07:33:14 AM »

Fantastic figures and game table, wonderful! Have you tried "Valour and Fortitude" from the Perry?

Rogerc · « **Reply #138 on:** January 02, 2024, 12:54:45 PM »

Hi Juan, I havent tried valour and fortitude no, I assumed they were aimed at Divisions/Corps like most rules. My 5 battalions a side max would probably not be a good fit. That said if you think it might be a good fit happy to give it a try.

has.been the 3d prints are pre-printed, I dont have a printer either your just getting good quality resin instead of metal. Much nicer sculpts. have a look at this one: https://www.ebay.co.uk/itm/386176453810?hash=item59e9e90cb2:g:iRgAAOSwYe1lIXgM&amdata=enc%3AAQAIAAAA4IcEFLlv6M%2BGdNOwGF2DHsdX8wgRA8Krr5PTgL0rhtBbY5MVXF2AYiyEZH6TypoD9cL3sJuNGg%2FoZ2cRzt9jtn11Gp93Ow0FU39ubjApXYUbt97mYe3HIryDOiPZbVw%2FEWFCMJlAOHCjfWI42n3VUjBJCE%2FBtzGbD5ALl8sbDKYK3VFL6gGZwGMIIX%2Fn6WhqEmQs5uVWjwJK8MsMgN0vw0j9gaFNpbEl2Hwz%2BI213W8nubK0ifcDZhNhC2kpWJ6xRJbm%2F3L4497OrWaIbX83vQL%2BeKp1aCapx70vSnGPPabs%7Ctkp%3ABk9SR8z156OZYw

has.been · « **Reply #139 on:** January 02, 2024, 01:25:18 PM »

Thanks, I'll take a look at those.

Rogerc · « **Reply #140 on:** January 02, 2024, 01:42:07 PM »

The ones on table are a different 1/48 set which are nice, these ones I have but yet to paint, slightly bigger and more robust than the others. There are also pre-painted 0 gauge cattle for railways that might be a good fit. I just prefer to paint my own.

Rogerc · « **Reply #141 on:** January 02, 2024, 05:34:00 PM »

I will share an image when these eventually get painted.

has.been · « **Reply #142 on:** January 02, 2024, 06:07:03 PM »

I look forward to that.

Rogerc · « **Reply #143 on:** January 02, 2024, 10:41:56 PM »

Another option I have just found, get an stl file and have it printed, I use Sabotag3d who printed lovely 40mm figures from Piano wargames, they have a file of cattle here https://pianowargames.de/products/cows-stl

wish I had found them sooner.

has.been · « **Reply #144 on:** January 03, 2024, 11:38:02 AM »

never done the 'getting someone to print' thing.
It is the way to go though.
And to think I used to think of Star Trek's replicators as, well, fiction.

Rogerc · « **Reply #145 on:** January 03, 2024, 12:22:58 PM »

Well I admit it blagged my head for a while but there are plenty of small businesses out there that cater specifically to our hobby.

I used Paul at Sabotag3d and find him great. Buy the file, email to printer, get a quote for how many you want and off you go. As I was changing the scale from 28mm to 40mm we needed to print some samples to get the scale to match Perry's and check the quality was good but end result is brill.

Cost wise its been pretty good, cheaper than metal if you use the file more than once as I have with the Hessians(file with 6 marching printed 6 times to give me 36 marching figures, cost of file is paid once and split over the 36) figures printed , and if I had spotted them sooner I would have bought the STL file for these Piano Miniature cows and had them printed too.